Version three of the driver for Texas Instruments TMP512/513 sensors. Thanks again for the review, I think we are getting close. I'm not in an easy position for now to test the driver without device tree. I can put the required effort to Main changes from version 2: - Remove the neccessity to provide a shunt-resistor value - Remove max-expected-current-ma configuration and always use max possible current for calibration - Make sure calculation during calibration can't overflow - Add value clamping for DT value and runtime parameters - Support non DT system - Move hysteresis from DT to standard attribute Main changes from version 1: - Use the with_info API instead of sysfs attributes. - Remove non-standard attributes and raw value. - Move settings that were non-standard attributes to device tree, update documentation as well. - Fix coding style issues Eric Tremblay (2): Add driver for Texas Instruments TMP512/513 sensor chips. Add DT bindings for TMP513 driver .../devicetree/bindings/hwmon/tmp513.txt | 33 + Documentation/hwmon/tmp513.rst | 102 ++ MAINTAINERS | 7 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/tmp513.c | 901 ++++++++++++++++++ include/linux/platform_data/tmp513.h | 28 + 7 files changed, 1082 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/tmp513.txt create mode 100644 Documentation/hwmon/tmp513.rst create mode 100644 drivers/hwmon/tmp513.c create mode 100644 include/linux/platform_data/tmp513.h -- 2.17.1
