On Wed, Oct 2, 2019 at 10:09 AM Sa, Nuno <Nuno.Sa@xxxxxxxxxx> wrote: > > On Wed, 2019-10-02 at 09:19 -0500, Rob Herring wrote: > > > > On Tue, Sep 24, 2019 at 02:49:45PM +0200, Nuno Sá wrote: > > > Document the LTC2947 device devicetree bindings. > > > > > > Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx> > > > --- > > > .../bindings/hwmon/adi,ltc2947.yaml | 101 > > > ++++++++++++++++++ > > > MAINTAINERS | 1 + > > > 2 files changed, 102 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > new file mode 100644 > > > index 000000000000..2ea0187421d4 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > > > @@ -0,0 +1,101 @@ > > > > Missing license. Please make new bindings (GPL-2.0-only OR BSD-2- > > Clause) > > ack. > > > > +%YAML 1.2 > > > +--- > > > +$id: > > > http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Analog Devices LTC2947 high precision power and energy > > > monitor > > > + > > > +maintainers: > > > + - Nuno Sá <nuno.sa@xxxxxxxxxx> > > > + > > > +description: | > > > + Analog Devices LTC2947 high precision power and energy monitor > > > over SPI or I2C. > > > + > > > + > > > https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - adi,ltc2947 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + description: > > > + The LTC2947 uses either a trimmed internal oscillator or an > > > external clock > > > + as the time base for determining the integration period to > > > represent time, > > > + charge and energy. When an external clock is used, this > > > property must be > > > + set accordingly. > > > + maxItems: 1 > > > + > > > + adi,accumulator-ctl-pol: > > > + description: > > > + This property controls the polarity of current that is > > > accumulated to > > > + calculate charge and energy so that, they can be only > > > accumulated for > > > + positive current for example. Since there are two sets of > > > registers for > > > + the accumulated values, this entry can also have two items > > > which sets > > > + energy1/charge1 and energy2/charger2 respectively. Check > > > table 12 of the > > > + datasheet for more information on the supported options. > > > + allOf: > > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > > + - enum: [0, 1, 2, 3] > > > + - minItems: 2 > > > + - maxItems: 2 > > > + default: [0, 0] > > > > This should be: > > > > allOf: > > - $ref: ... > > items: > > enum: [0, 1, 2, 3] > > default: 0 > > minItems: 2 > > maxItems: 2 > > I was expecting this already. When upstreaming another device, I > realized some errors with `make dt_binding_check` when evaluating the > example. Just for my understanding, is this also incorrect? The allOf structure like this also works. You'll get better error messages if schemas are not under an allOf. > allOf: > - $ref: /schemas/types.yaml#/definitions/uint32-array > - minItems: 2 > maxItems: 2 > items: > enum: [0, 1, 2, 3] > default: 0 However, 'default' needs to be indented under 'items'. > > I used a similar pattern in another device that is also waiting for > review :). > > > + > > > + adi,accumulation-deadband-microamp: > > > + description: > > > + This property controls the Accumulation Dead band which > > > allows to set the > > > + level of current below which no accumulation takes place. > > > + allOf: > > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > > + - maximum: 255 > > > > maximum should be at same indent as allOf. Or default should be at > > the > > same level as maximum (under a single '-' list entry). > > So it should be? > > allOf: > - $ref: /schemas/types.yaml#/definitions/uint32 > - maximum: 255 > default: 0 Yes.
