On Thu, Sep 05, 2019 at 01:45:54AM +0000, Dan Robertson wrote:
> Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to
> retrieve the chip ID from the ID register. See section 5.7 of the shtw1
> or shtc1 datasheet for details.
>
> Fixes: 1a539d372edd9832444e7a3daa710c444c014dc9 ("hwmon: add support for Sensirion SHTC1 sensor")
> Signed-off-by: Dan Robertson <dan@xxxxxxxxxxxxxxx>
Applied after reordering and adjusting. The fix should come first,
followed by adding support for the new chip.
Thanks,
Guenter
> ---
> drivers/hwmon/shtc1.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
> index 3e9a859a2b58..c628313a20d4 100644
> --- a/drivers/hwmon/shtc1.c
> +++ b/drivers/hwmon/shtc1.c
> @@ -27,14 +27,14 @@ static const unsigned char shtc1_cmd_measure_nonblocking_lpm[] = { 0x60, 0x9c };
> static const unsigned char shtc1_cmd_read_id_reg[] = { 0xef, 0xc8 };
>
> /* constants for reading the ID register
> - * SHTC1: 0x0007 with mask 0x001f
> - * SHTW1: 0x0007 with mask 0x001f
> + * SHTC1: 0x0007 with mask 0x003f
> + * SHTW1: 0x0007 with mask 0x003f
> * SHTC3: 0x0807 with mask 0x083f
> */
> #define SHTC3_ID 0x0807
> #define SHTC3_ID_MASK 0x083f
> #define SHTC1_ID 0x0007
> -#define SHTC1_ID_MASK 0x001f
> +#define SHTC1_ID_MASK 0x003f
>
> /* delays for non-blocking i2c commands, both in us */
> #define SHTC1_NONBLOCKING_WAIT_TIME_HPM 14400
