And simplify the error handling. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- drivers/hwmon/w83791d.c | 32 +++++++++----------------------- 1 file changed, 9 insertions(+), 23 deletions(-) diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 050ad4201691..aad8d4da5802 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -1260,7 +1260,7 @@ static int w83791d_detect_subclients(struct i2c_client *client) struct i2c_adapter *adapter = client->adapter; struct w83791d_data *data = i2c_get_clientdata(client); int address = client->addr; - int i, id, err; + int i, id; u8 val; id = i2c_adapter_id(adapter); @@ -1272,8 +1272,7 @@ static int w83791d_detect_subclients(struct i2c_client *client) "invalid subclient " "address %d; must be 0x48-0x4f\n", force_subclients[i]); - err = -ENODEV; - goto error_sc_0; + return -ENODEV; } } w83791d_write(client, W83791D_REG_I2C_SUBADDR, @@ -1283,29 +1282,22 @@ static int w83791d_detect_subclients(struct i2c_client *client) val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); if (!(val & 0x08)) - data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); + data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter, + 0x48 + (val & 0x7)); if (!(val & 0x80)) { - if ((data->lm75[0] != NULL) && + if (!IS_ERR(data->lm75[0]) && ((val & 0x7) == ((val >> 4) & 0x7))) { dev_err(&client->dev, "duplicate addresses 0x%x, " "use force_subclient\n", data->lm75[0]->addr); - err = -ENODEV; - goto error_sc_1; + return -ENODEV; } - data->lm75[1] = i2c_new_dummy(adapter, - 0x48 + ((val >> 4) & 0x7)); + data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; - -/* Undo inits in case of errors */ - -error_sc_1: - i2c_unregister_device(data->lm75[0]); -error_sc_0: - return err; } @@ -1394,7 +1386,7 @@ static int w83791d_probe(struct i2c_client *client, /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &w83791d_group); if (err) - goto error3; + return err; /* Check if pins of fan/pwm 4-5 are in use as GPIO */ has_fanpwm45 = w83791d_read(client, W83791D_REG_GPIO) & 0x10; @@ -1419,9 +1411,6 @@ static int w83791d_probe(struct i2c_client *client, sysfs_remove_group(&client->dev.kobj, &w83791d_group_fanpwm45); error4: sysfs_remove_group(&client->dev.kobj, &w83791d_group); -error3: - i2c_unregister_device(data->lm75[0]); - i2c_unregister_device(data->lm75[1]); return err; } @@ -1432,9 +1421,6 @@ static int w83791d_remove(struct i2c_client *client) hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &w83791d_group); - i2c_unregister_device(data->lm75[0]); - i2c_unregister_device(data->lm75[1]); - return 0; } -- 2.20.1