Re: [PATCH v4 2/2] hwmon: pmbus: Add Inspur Power System power supply driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/15/19 7:44 PM, John Wang wrote:
On Fri, Aug 16, 2019 at 3:41 AM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

On Thu, Aug 15, 2019 at 06:43:52PM +0000, Vijay Khemka wrote:


On 8/13/19, 1:36 AM, "openbmc on behalf of John Wang" <openbmc-bounces+vijaykhemka=fb.com@xxxxxxxxxxxxxxxx on behalf of wangzqbj@xxxxxxxxxx> wrote:

     Add the driver to monitor Inspur Power System power supplies
     with hwmon over pmbus.

     This driver adds sysfs attributes for additional power supply data,
     including vendor, model, part_number, serial number,
     firmware revision, hardware revision, and psu mode(active/standby).

     Signed-off-by: John Wang <wangzqbj@xxxxxxxxxx>
     ---
     v4:
         - Remove the additional tabs in the Makefile
         - Rebased on 5.3-rc4, not 5.2
     v3:
         - Sort kconfig/makefile entries alphabetically
         - Remove unnecessary initialization
         - Use ATTRIBUTE_GROUPS instead of expanding directly
         - Use memscan to avoid reimplementation
     v2:
         - Fix typos in commit message
         - Invert Christmas tree
         - Configure device with sysfs attrs, not debugfs entries
         - Fix errno in fw_version_read, ENODATA to EPROTO
         - Change the print format of fw-version
         - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
         - Document sysfs attributes
     ---
      Documentation/hwmon/inspur-ipsps1.rst |  79 +++++++++
      drivers/hwmon/pmbus/Kconfig           |   9 +
      drivers/hwmon/pmbus/Makefile          |   1 +
      drivers/hwmon/pmbus/inspur-ipsps.c    | 226 ++++++++++++++++++++++++++
      4 files changed, 315 insertions(+)
      create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
      create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c

     diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
     new file mode 100644
     index 000000000000..aa19f0ccc8b0
     --- /dev/null
     +++ b/Documentation/hwmon/inspur-ipsps1.rst
     @@ -0,0 +1,79 @@
     +Kernel driver inspur-ipsps1
     +=======================
     +
     +Supported chips:
     +
     +  * Inspur Power System power supply unit
     +
     +Author: John Wang <wangzqbj@xxxxxxxxxx>
     +
     +Description
     +-----------
     +
     +This driver supports Inspur Power System power supplies. This driver
     +is a client to the core PMBus driver.
     +
     +Usage Notes
     +-----------
     +
     +This driver does not auto-detect devices. You will have to instantiate the
     +devices explicitly. Please see Documentation/i2c/instantiating-devices for
     +details.
     +
     +Sysfs entries
     +-------------
     +
     +The following attributes are supported:
     +
     +======================= ======================================================
     +curr1_input             Measured input current
     +curr1_label             "iin"
     +curr1_max               Maximum current
     +curr1_max_alarm         Current high alarm
     +curr2_input              Measured output current in mA.
     +curr2_label              "iout1"
     +curr2_crit              Critical maximum current
     +curr2_crit_alarm        Current critical high alarm
     +curr2_max               Maximum current
     +curr2_max_alarm         Current high alarm
     +
Please align above details.

Sorry for the mix of table and space

     +fan1_alarm               Fan 1 warning.
     +fan1_fault               Fan 1 fault.
     +fan1_input               Fan 1 speed in RPM.
     +
     +in1_alarm                Input voltage under-voltage alarm.
     +in1_input                Measured input voltage in mV.
     +in1_label                "vin"
     +in2_input                Measured output voltage in mV.
     +in2_label                "vout1"
     +in2_lcrit               Critical minimum output voltage
     +in2_lcrit_alarm         Output voltage critical low alarm
     +in2_max                 Maximum output voltage
     +in2_max_alarm           Output voltage high alarm
     +in2_min                 Minimum output voltage
     +in2_min_alarm           Output voltage low alarm
     +
     +power1_alarm             Input fault or alarm.
     +power1_input             Measured input power in uW.
     +power1_label             "pin"
     +power1_max              Input power limit
     +power2_max_alarm Output power high alarm
     +power2_max              Output power limit
     +power2_input             Measured output power in uW.
     +power2_label             "pout"
     +
Same alignment issue in description.

will fix.

     +temp[1-3]_input          Measured temperature
     +temp[1-2]_max            Maximum temperature
     +temp[1-3]_max_alarm      Temperature high alarm
     +
     +vendor                  Manufacturer name
     +model                   Product model
     +part_number             Product part number
     +serial_number           Product serial number
     +fw_version              Firmware version
     +hw_version              Hardware version
     +mode                    Work mode. Can be set to active or
     +                        standby, when set to standby, PSU will
     +                        automatically switch between standby
     +                        and redundancy mode.
     +======================= ======================================================
     diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
     index b6588483fae1..d62d69bb7e49 100644
     --- a/drivers/hwmon/pmbus/Kconfig
     +++ b/drivers/hwmon/pmbus/Kconfig
     @@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS
         This driver can also be built as a module. If so, the module will
         be called ibm-cffps.

     +config SENSORS_INSPUR_IPSPS
     + tristate "INSPUR Power System Power Supply"
     + help
     +   If you say yes here you get hardware monitoring support for the INSPUR
     +   Power System power supply.
     +
     +   This driver can also be built as a module. If so, the module will
     +   be called inspur-ipsps.
     +
      config SENSORS_IR35221
       tristate "Infineon IR35221"
       help
     diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
     index c950ea9a5d00..03bacfcfd660 100644
     --- a/drivers/hwmon/pmbus/Makefile
     +++ b/drivers/hwmon/pmbus/Makefile
     @@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS)               += pmbus_core.o
      obj-$(CONFIG_SENSORS_PMBUS)      += pmbus.o
      obj-$(CONFIG_SENSORS_ADM1275)    += adm1275.o
      obj-$(CONFIG_SENSORS_IBM_CFFPS)  += ibm-cffps.o
     +obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
      obj-$(CONFIG_SENSORS_IR35221)    += ir35221.o
      obj-$(CONFIG_SENSORS_IR38064)    += ir38064.o
      obj-$(CONFIG_SENSORS_IRPS5401)   += irps5401.o
     diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
     new file mode 100644
     index 000000000000..fa981b881a60
     --- /dev/null
     +++ b/drivers/hwmon/pmbus/inspur-ipsps.c
     @@ -0,0 +1,226 @@
     +// SPDX-License-Identifier: GPL-2.0-or-later
     +/*
     + * Copyright 2019 Inspur Corp.
     + */
     +
     +#include <linux/debugfs.h>
     +#include <linux/device.h>
     +#include <linux/fs.h>
     +#include <linux/i2c.h>
     +#include <linux/module.h>
     +#include <linux/pmbus.h>
     +#include <linux/hwmon-sysfs.h>
     +
     +#include "pmbus.h"
     +
     +#define IPSPS_REG_VENDOR_ID      0x99
     +#define IPSPS_REG_MODEL          0x9A
     +#define IPSPS_REG_FW_VERSION     0x9B
     +#define IPSPS_REG_PN             0x9C
     +#define IPSPS_REG_SN             0x9E
     +#define IPSPS_REG_HW_VERSION     0xB0
     +#define IPSPS_REG_MODE           0xFC
     +
     +#define MODE_ACTIVE              0x55
     +#define MODE_STANDBY             0x0E
     +#define MODE_REDUNDANCY          0x00
     +
     +#define MODE_ACTIVE_STRING               "active"
     +#define MODE_STANDBY_STRING              "standby"
     +#define MODE_REDUNDANCY_STRING           "redundancy"
     +
     +enum ipsps_index {
     + vendor,
     + model,
     + fw_version,
     + part_number,
     + serial_number,
     + hw_version,
     + mode,
     + num_regs,
     +};
     +
     +static const u8 ipsps_regs[num_regs] = {
     + [vendor] = IPSPS_REG_VENDOR_ID,
     + [model] = IPSPS_REG_MODEL,
     + [fw_version] = IPSPS_REG_FW_VERSION,
     + [part_number] = IPSPS_REG_PN,
     + [serial_number] = IPSPS_REG_SN,
     + [hw_version] = IPSPS_REG_HW_VERSION,
     + [mode] = IPSPS_REG_MODE,
     +};
     +
     +static ssize_t ipsps_string_show(struct device *dev,
     +                          struct device_attribute *devattr,
     +                          char *buf)
     +{
     + u8 reg;
     + int rc;
     + char *p;
     + char data[I2C_SMBUS_BLOCK_MAX + 1];
     + struct i2c_client *client = to_i2c_client(dev->parent);
     + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
     +
     + reg = ipsps_regs[attr->index];
     + rc = i2c_smbus_read_block_data(client, reg, data);
     + if (rc < 0)
     +         return rc;
     +
     + /* filled with printable characters, ending with # */
     + p = memscan(data, '#', rc);
     + *p = '\0';
     +
     + return snprintf(buf, PAGE_SIZE, "%s\n", data);
     +}
     +
     +static ssize_t ipsps_fw_version_show(struct device *dev,
     +                              struct device_attribute *devattr,
     +                              char *buf)
     +{
     + u8 reg;
     + int rc;
     + u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
     + struct i2c_client *client = to_i2c_client(dev->parent);
     + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
     +
     + reg = ipsps_regs[attr->index];
     + rc = i2c_smbus_read_block_data(client, reg, data);
     + if (rc < 0)
     +         return rc;
     +
     + if (rc != 6)
     +         return -EPROTO;
     +
     + return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
     +                 data[1], data[2]/* < 100 */, data[3]/*< 10*/,
     +                 data[4], data[5]/* < 100 */);
     +}
     +
     +static ssize_t ipsps_mode_show(struct device *dev,
     +                        struct device_attribute *devattr, char *buf)
     +{
     + u8 reg;
     + int rc;
     + struct i2c_client *client = to_i2c_client(dev->parent);
     + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
     +
     + reg = ipsps_regs[attr->index];
     + rc = i2c_smbus_read_byte_data(client, reg);
     + if (rc < 0)
     +         return rc;
     +
     + switch (rc) {
     + case MODE_ACTIVE:
     +         return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
     +                         MODE_ACTIVE_STRING,
     +                         MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
     + case MODE_STANDBY:
     +         return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
     +                         MODE_ACTIVE_STRING,
     +                         MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
     + case MODE_REDUNDANCY:
     +         return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
     +                         MODE_ACTIVE_STRING,
     +                         MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
     + default:
     +         return snprintf(buf, PAGE_SIZE, "unspecified\n");
     + }
     +}
     +
     +static ssize_t ipsps_mode_store(struct device *dev,
     +                         struct device_attribute *devattr,
     +                         const char *buf, size_t count)
     +{
     + u8 reg;
     + int rc;
     + struct i2c_client *client = to_i2c_client(dev->parent);
     + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
     +
     + reg = ipsps_regs[attr->index];
     + if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
     +         rc = i2c_smbus_write_byte_data(client, reg,
     +                                        MODE_STANDBY);
     +         if (rc < 0)
     +                 return rc;
     +         return count;
     + } else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
     +         rc = i2c_smbus_write_byte_data(client, reg,
     +                                        MODE_ACTIVE);
     +         if (rc < 0)
     +                 return rc;
     +         return count;
     + }
     +
     + return -EINVAL;
     +}
     +
     +static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
     +static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
     +static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
     +static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
     +static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
     +static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
     +static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
     +
     +static struct attribute *ipsps_attrs[] = {
     + &sensor_dev_attr_vendor.dev_attr.attr,
     + &sensor_dev_attr_model.dev_attr.attr,
     + &sensor_dev_attr_part_number.dev_attr.attr,
     + &sensor_dev_attr_serial_number.dev_attr.attr,
     + &sensor_dev_attr_hw_version.dev_attr.attr,
     + &sensor_dev_attr_fw_version.dev_attr.attr,
     + &sensor_dev_attr_mode.dev_attr.attr,
     + NULL,
     +};
     +
     +ATTRIBUTE_GROUPS(ipsps);
     +
     +static struct pmbus_driver_info ipsps_info = {
     + .pages = 1,
     + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
     +         PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
     +         PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
     +         PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
     +         PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
     +         PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
This can be dynamic read by chip identify function

PMBUS_SKIP_STATUS_CHECK weakens auto-detetcion to some degree,
and auto-detection takes time since it needs to poll all registers
to determine if they exist. I don't mind if you insist, but I don't
immediately see the benefits.

ipsps does not specify that the vendor must support the status_cml
register( some vendor do not support),
so PMBUS_SKIP_STATUS_CHECK is used here.


I did not question that. I did question the request to use auto-detection,
which is quite unusual since you have a dedicated driver for the chip anyway.

Asking more directly: What is the problem with specifying capabilities
directly, and what is the advantage of using auto-detection ?

Guenter


     + .groups = ipsps_groups,
     +};
     +
     +static struct pmbus_platform_data ipsps_pdata = {
     + .flags = PMBUS_SKIP_STATUS_CHECK,
     +};
     +
     +static int ipsps_probe(struct i2c_client *client,
     +                const struct i2c_device_id *id)
     +{
     + client->dev.platform_data = &ipsps_pdata;
Allocate memory for this platform data inside tis function rather than having global variable.

Does that have any value other than consuming more memory
if there are multiple instances of the driver ?

     + return pmbus_do_probe(client, id, &ipsps_info);
     +}
     +
     +static const struct i2c_device_id ipsps_id[] = {
     + { "inspur_ipsps1", 0 },
     + {}
     +};
     +MODULE_DEVICE_TABLE(i2c, ipsps_id);
     +
     +static const struct of_device_id ipsps_of_match[] = {
     + { .compatible = "inspur,ipsps1" },
     + {}
     +};
     +MODULE_DEVICE_TABLE(of, ipsps_of_match);
     +
     +static struct i2c_driver ipsps_driver = {
     + .driver = {
     +         .name = "inspur-ipsps",
     +         .of_match_table = ipsps_of_match,
     + },
     + .probe = ipsps_probe,
     + .remove = pmbus_do_remove,
     + .id_table = ipsps_id,
     +};
     +
     +module_i2c_driver(ipsps_driver);
     +
     +MODULE_AUTHOR("John Wang");
     +MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
     +MODULE_LICENSE("GPL");
     --
     2.17.1








[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux