Re: [PATCH v2 2/2] hwmon: pmbus: Add Inspur Power System power supply driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Around 08/10/2019 04:55AM in some time zone, John Wang wrote:
>
>Add the driver to monitor Inspur Power System power supplies
>with hwmon over pmbus.
>
>This driver adds sysfs attributes for additional power supply data,
>including vendor, model, part_number, serial number,
>firmware revision, hardware revision, and psu mode(active/standby).
>
>Signed-off-by: John Wang <wangzqbj@xxxxxxxxxx>
>---
>v2:
>    - Fix typos in commit message
>    - Invert Christmas tree
>    - Configure device with sysfs attrs, not debugfs entries
>    - Fix errno in fw_version_read, ENODATA to EPROTO
>    - Change the print format of fw-version
>    - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
>    - Document sysfs attributes
>---
> Documentation/hwmon/inspur-ipsps1.rst |  79 +++++++++
> drivers/hwmon/pmbus/Kconfig           |   9 +
> drivers/hwmon/pmbus/Makefile          |   1 +
> drivers/hwmon/pmbus/inspur-ipsps.c    | 236
>++++++++++++++++++++++++++
> 4 files changed, 325 insertions(+)
> create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
> create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
>
>diff --git a/Documentation/hwmon/inspur-ipsps1.rst
>b/Documentation/hwmon/inspur-ipsps1.rst
....
>diff --git a/drivers/hwmon/pmbus/Kconfig>b/drivers/hwmon/pmbus/Kconfig
>index 30751eb9550a..c09357c26b10 100644
>--- a/drivers/hwmon/pmbus/Kconfig
>+++ b/drivers/hwmon/pmbus/Kconfig
>@@ -203,4 +203,13 @@ config SENSORS_ZL6100
> 	  This driver can also be built as a module. If so, the module will
> 	  be called zl6100.
> 
>+config SENSORS_INSPUR_IPSPS
>+	tristate "INSPUR Power System Power Supply"

The entries in this file are sorted alphabetically.

>diff --git a/drivers/hwmon/pmbus/Makefile>b/drivers/hwmon/pmbus/Makefile
>index 2219b9300316..fde2d10cd05c 100644
>--- a/drivers/hwmon/pmbus/Makefile
>+++ b/drivers/hwmon/pmbus/Makefile
>@@ -23,3 +23,4 @@ obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
> obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
> obj-$(CONFIG_SENSORS_UCD9200)	+= ucd9200.o
> obj-$(CONFIG_SENSORS_ZL6100)	+= zl6100.o
>+obj-$(CONFIG_SENSORS_INSPUR_IPSPS)	+= inspur-ipsps.o
>diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c
>b/drivers/hwmon/pmbus/inspur-ipsps.c
>new file mode 100644
>index 000000000000..f6dd10a62aef
>--- /dev/null
>+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
>@@ -0,0 +1,236 @@
>+// SPDX-License-Identifier: GPL-2.0-or-later
>+/*
>+ * Copyright 2019 Inspur Corp.
>+ */
>+
>+#include <linux/debugfs.h>
>+#include <linux/device.h>
>+#include <linux/fs.h>
>+#include <linux/i2c.h>
>+#include <linux/module.h>
>+#include <linux/pmbus.h>
>+#include <linux/hwmon-sysfs.h>
>+
>+#include "pmbus.h"
>+
>+#define IPSPS_REG_VENDOR_ID	0x99
>+#define IPSPS_REG_MODEL		0x9A
>+#define IPSPS_REG_FW_VERSION	0x9B
>+#define IPSPS_REG_PN		0x9C
>+#define IPSPS_REG_SN		0x9E
>+#define IPSPS_REG_HW_VERSION	0xB0
>+#define IPSPS_REG_MODE		0xFC
>+
>+#define MODE_ACTIVE		0x55
>+#define MODE_STANDBY		0x0E
>+#define MODE_REDUNDANCY		0x00
>+
>+#define MODE_ACTIVE_STRING		"active"
>+#define MODE_STANDBY_STRING		"standby"
>+#define MODE_REDUNDANCY_STRING		"redundancy"
>+
>+enum ipsps_index {
>+	vendor,
>+	model,
>+	fw_version,
>+	part_number,
>+	serial_number,
>+	hw_version,
>+	mode,
>+	num_regs,
>+};
>+
>+static const u8 ipsps_regs[num_regs] = {
>+	[vendor] = IPSPS_REG_VENDOR_ID,
>+	[model] = IPSPS_REG_MODEL,
>+	[fw_version] = IPSPS_REG_FW_VERSION,
>+	[part_number] = IPSPS_REG_PN,
>+	[serial_number] = IPSPS_REG_SN,
>+	[hw_version] = IPSPS_REG_HW_VERSION,
>+	[mode] = IPSPS_REG_MODE,
>+};
>+
>+static ssize_t ipsps_string_show(struct device *dev,
>+				 struct device_attribute *devattr,
>+				 char *buf)
>+{
>+	u8 reg;
>+	int rc, i;
>+	char data[I2C_SMBUS_BLOCK_MAX + 1] = { 0 };

Shouldn't need to initialize this.

>+	struct i2c_client *client = to_i2c_client(dev->parent);>+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+	reg = ipsps_regs[attr->index];
>+	rc = i2c_smbus_read_block_data(client, reg, data);
>+	if (rc < 0)
>+		return rc;
>+
>+	for (i = 0; i < rc; i++) {
>+		/* filled with printable characters, ending with # */
>+		if (data[i] == '#')
>+			break;
>+	}

This seems to be p = memscan(data, '#', rc);

>+>+	data[i] = '\0';
>+
>+	return snprintf(buf, PAGE_SIZE, "%s\n", data);
>+}
>+
>+static ssize_t ipsps_fw_version_show(struct device *dev,
>+				     struct device_attribute *devattr,
>+				     char *buf)
>+{
>+	u8 reg;
>+	int rc;
>+	u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
>+	struct i2c_client *client = to_i2c_client(dev->parent);
>+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+	reg = ipsps_regs[attr->index];
>+	rc = i2c_smbus_read_block_data(client, reg, data);
>+	if (rc < 0)
>+		return rc;
>+
>+	if (rc != 6)
>+		return -EPROTO;
>+
>+	return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
>+			data[1], data[2]/* < 100 */, data[3]/*< 10*/,
>+			data[4], data[5]/* < 100 */);
>+}
>+
>+static ssize_t ipsps_mode_show(struct device *dev,
>+			       struct device_attribute *devattr, char *buf)
>+{
>+	u8 reg;
>+	int rc;
>+	struct i2c_client *client = to_i2c_client(dev->parent);
>+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+	reg = ipsps_regs[attr->index];
>+	rc = i2c_smbus_read_byte_data(client, reg);
>+	if (rc < 0)
>+		return rc;
>+
>+	switch (rc) {
>+	case MODE_ACTIVE:
>+		return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
>+				MODE_ACTIVE_STRING,
>+				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+	case MODE_STANDBY:
>+		return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
>+				MODE_ACTIVE_STRING,
>+				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+	case MODE_REDUNDANCY:
>+		return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
>+				MODE_ACTIVE_STRING,
>+				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+	default:
>+		return snprintf(buf, PAGE_SIZE, "unspecified\n");
>+	}
>+}
>+
>+static ssize_t ipsps_mode_store(struct device *dev,
>+				struct device_attribute *devattr,
>+				const char *buf, size_t count)
>+{
>+	u8 reg;
>+	int rc;
>+	struct i2c_client *client = to_i2c_client(dev->parent);
>+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+	reg = ipsps_regs[attr->index];
>+	if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
>+		rc = i2c_smbus_write_byte_data(client, reg,
>+					       MODE_STANDBY);
>+		if (rc < 0)
>+			return rc;
>+		return count;
>+	} else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
>+		rc = i2c_smbus_write_byte_data(client, reg,
>+					       MODE_ACTIVE);
>+		if (rc < 0)
>+			return rc;
>+		return count;
>+	}
>+
>+	return -EINVAL;
>+}
>+
>+static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
>+static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
>+static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string,
>part_number);
>+static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string,
>serial_number);
>+static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
>+static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version,
>fw_version);
>+static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
>+
>+static struct attribute *enable_attrs[] = {
>+	&sensor_dev_attr_vendor.dev_attr.attr,
>+	&sensor_dev_attr_model.dev_attr.attr,
>+	&sensor_dev_attr_part_number.dev_attr.attr,
>+	&sensor_dev_attr_serial_number.dev_attr.attr,
>+	&sensor_dev_attr_hw_version.dev_attr.attr,
>+	&sensor_dev_attr_fw_version.dev_attr.attr,
>+	&sensor_dev_attr_mode.dev_attr.attr,
>+	NULL,
>+};
>+
>+static const struct attribute_group enable_group = {
>+	.attrs = enable_attrs,
>+};
>+
>+static const struct attribute_group *attribute_groups[] = {
>+	&enable_group,
>+	NULL,
>+};

ATTRIBUTE_GROUPS(enable);

>+
>+static struct pmbus_driver_info ipsps_info = {
>+	.pages = 1,
>+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
>+		PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
>+		PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
>+		PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
>+		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
>+		PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
>+	.groups = attribute_groups,
>+};
>+
>+static struct pmbus_platform_data ipsps_pdata = {
>+	.flags = PMBUS_SKIP_STATUS_CHECK,
>+};
>+
>+static int ipsps_probe(struct i2c_client *client,
>+		       const struct i2c_device_id *id)
>+{
>+	client->dev.platform_data = &ipsps_pdata;
>+	return pmbus_do_probe(client, id, &ipsps_info);
>+}
>+
>+static const struct i2c_device_id ipsps_id[] = {
>+	{ "inspur_ipsps1", 0 },
>+	{}
>+};
>+MODULE_DEVICE_TABLE(i2c, ipsps_id);
>+
>+static const struct of_device_id ipsps_of_match[] = {
>+	{ .compatible = "inspur,ipsps1" },
>+	{}
>+};
>+MODULE_DEVICE_TABLE(of, ipsps_of_match);
>+
>+static struct i2c_driver ipsps_driver = {
>+	.driver = {
>+		.name = "inspur-ipsps",
>+		.of_match_table = ipsps_of_match,
>+	},
>+	.probe = ipsps_probe,
>+	.remove = pmbus_do_remove,
>+	.id_table = ipsps_id,
>+};
>+
>+module_i2c_driver(ipsps_driver);
>+
>+MODULE_AUTHOR("John Wang");
>+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power
>supplies");
>+MODULE_LICENSE("GPL");
>-- 
>2.17.1
>
>




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux