On Thu, Aug 01, 2019 at 08:53:24AM +0100, Iker Perez wrote: > From: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx> > > The configuration register of the tmp75b sensor is 16bit long, however > the first byte is reserved, so there is not no need to take care of it. > > Because the order of the bytes is little endian and it is only wanted to > write one byte, the desired bits must be shifted in a 8 bit range. > > Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx> Applied. Thanks, Guenter > --- > drivers/hwmon/lm75.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c > index 3fb9c0a2d6d0..ce5ec403ec73 100644 > --- a/drivers/hwmon/lm75.c > +++ b/drivers/hwmon/lm75.c > @@ -343,7 +343,7 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) > data->sample_time = MSEC_PER_SEC / 2; > break; > case tmp75b: /* not one-shot mode, Conversion rate 37Hz */ > - clr_mask |= 1 << 15 | 0x3 << 13; > + clr_mask |= 1 << 7 | 0x3 << 5; > data->resolution = 12; > data->sample_time = MSEC_PER_SEC / 37; > break;
