On Sun, Jul 21, 2019 at 02:00:51PM +0200, Robert Karszniewicz wrote:
> Removes:
> - hwmon_dev from k8temp_data struct, as that is now passed
> to callbacks, anyway.
> - other k8temp_data struct fields, too.
> - k8temp_update_device()
>
> Also reduces binary size:
> text data bss dec hex filename
> 4139 1448 0 5587 15d3 drivers/hwmon/k8temp.ko.bak
> 3103 1220 0 4323 10e3 drivers/hwmon/k8temp.ko
>
> Signed-off-by: Robert Karszniewicz <avoidr@xxxxxxxxxxx>
> Signed-off-by: Robert Karszniewicz <avoidr@xxxxxxxxxx>
Applied.
> ---
> Changes from v2:
> - if (data->swap_core_select)
> - core ^= 1;
> + core ^= data->swap_core_select;
>
> However, that produces slightly more .text than v2, and is a tad too
> "tricky", I personally find.
>
Interesting - for me it produces ~30 bytes less code (with gcc 7.4.0).
> - Changed email service due to problems with the previous one.
>
> Changes from v1:
> - correct is_visible() and remove unnecessary checks
> - k8temp_read(): remove unnecessary checks and replace the switch
> - use HWMON_CHANNEL_INFO()
> - remove k8temp->name and pass the string directly
> - use PTR_ERR_OR_ZERO()
> - remove k8temp_update_device() and more k8temp_data fields
>
> drivers/hwmon/k8temp.c | 233 ++++++++++++-----------------------------
> 1 file changed, 69 insertions(+), 164 deletions(-)
>
> diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
> index 4994c90c8929..f73bd4eceb28 100644
> --- a/drivers/hwmon/k8temp.c
> +++ b/drivers/hwmon/k8temp.c
> @@ -10,10 +10,8 @@
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/slab.h>
> -#include <linux/jiffies.h>
> #include <linux/pci.h>
> #include <linux/hwmon.h>
> -#include <linux/hwmon-sysfs.h>
> #include <linux/err.h>
> #include <linux/mutex.h>
> #include <asm/processor.h>
> @@ -24,108 +22,18 @@
> #define SEL_CORE 0x04
>
> struct k8temp_data {
> - struct device *hwmon_dev;
> struct mutex update_lock;
> - const char *name;
> - char valid; /* zero until following fields are valid */
> - unsigned long last_updated; /* in jiffies */
>
> /* registers values */
> u8 sensorsp; /* sensor presence bits - SEL_CORE, SEL_PLACE */
> - u32 temp[2][2]; /* core, place */
> u8 swap_core_select; /* meaning of SEL_CORE is inverted */
> u32 temp_offset;
> };
>
> -static struct k8temp_data *k8temp_update_device(struct device *dev)
> -{
> - struct k8temp_data *data = dev_get_drvdata(dev);
> - struct pci_dev *pdev = to_pci_dev(dev);
> - u8 tmp;
> -
> - mutex_lock(&data->update_lock);
> -
> - if (!data->valid
> - || time_after(jiffies, data->last_updated + HZ)) {
> - pci_read_config_byte(pdev, REG_TEMP, &tmp);
> - tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
> - pci_write_config_byte(pdev, REG_TEMP, tmp);
> - pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
> -
> - if (data->sensorsp & SEL_PLACE) {
> - tmp |= SEL_PLACE; /* Select sensor 1, core0 */
> - pci_write_config_byte(pdev, REG_TEMP, tmp);
> - pci_read_config_dword(pdev, REG_TEMP,
> - &data->temp[0][1]);
> - }
> -
> - if (data->sensorsp & SEL_CORE) {
> - tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */
> - tmp |= SEL_CORE;
> - pci_write_config_byte(pdev, REG_TEMP, tmp);
> - pci_read_config_dword(pdev, REG_TEMP,
> - &data->temp[1][0]);
> -
> - if (data->sensorsp & SEL_PLACE) {
> - tmp |= SEL_PLACE; /* Select sensor 1, core1 */
> - pci_write_config_byte(pdev, REG_TEMP, tmp);
> - pci_read_config_dword(pdev, REG_TEMP,
> - &data->temp[1][1]);
> - }
> - }
> -
> - data->last_updated = jiffies;
> - data->valid = 1;
> - }
> -
> - mutex_unlock(&data->update_lock);
> - return data;
> -}
> -
> -/*
> - * Sysfs stuff
> - */
> -
> -static ssize_t name_show(struct device *dev, struct device_attribute
> - *devattr, char *buf)
> -{
> - struct k8temp_data *data = dev_get_drvdata(dev);
> -
> - return sprintf(buf, "%s\n", data->name);
> -}
> -
> -
> -static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
> - char *buf)
> -{
> - struct sensor_device_attribute_2 *attr =
> - to_sensor_dev_attr_2(devattr);
> - int core = attr->nr;
> - int place = attr->index;
> - int temp;
> - struct k8temp_data *data = k8temp_update_device(dev);
> -
> - if (data->swap_core_select && (data->sensorsp & SEL_CORE))
> - core = core ? 0 : 1;
> -
> - temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
> -
> - return sprintf(buf, "%d\n", temp);
> -}
> -
> -/* core, place */
> -
> -static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, 0);
> -static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0, 1);
> -static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 1, 0);
> -static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 1, 1);
> -static DEVICE_ATTR_RO(name);
> -
> static const struct pci_device_id k8temp_ids[] = {
> { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
> { 0 },
> };
> -
> MODULE_DEVICE_TABLE(pci, k8temp_ids);
>
> static int is_rev_g_desktop(u8 model)
> @@ -159,14 +67,76 @@ static int is_rev_g_desktop(u8 model)
> return 1;
> }
>
> +static umode_t
> +k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct k8temp_data *data = drvdata;
> +
> + if ((channel & 1) && !(data->sensorsp & SEL_PLACE))
> + return 0;
> +
> + if ((channel & 2) && !(data->sensorsp & SEL_CORE))
> + return 0;
> +
> + return 0444;
> +}
> +
> +static int
> +k8temp_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct k8temp_data *data = dev_get_drvdata(dev);
> + struct pci_dev *pdev = to_pci_dev(dev->parent);
> + int core, place;
> + u32 temp;
> + u8 tmp;
> +
> + core = (channel >> 1) & 1;
> + place = channel & 1;
> +
> + core ^= data->swap_core_select;
> +
> + mutex_lock(&data->update_lock);
> + pci_read_config_byte(pdev, REG_TEMP, &tmp);
> + tmp &= ~(SEL_PLACE | SEL_CORE);
> + if (core)
> + tmp |= SEL_CORE;
> + if (place)
> + tmp |= SEL_PLACE;
> + pci_write_config_byte(pdev, REG_TEMP, tmp);
> + pci_read_config_dword(pdev, REG_TEMP, &temp);
> + mutex_unlock(&data->update_lock);
> +
> + *val = TEMP_FROM_REG(temp) + data->temp_offset;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops k8temp_ops = {
> + .is_visible = k8temp_is_visible,
> + .read = k8temp_read,
> +};
> +
> +static const struct hwmon_channel_info *k8temp_info[] = {
> + HWMON_CHANNEL_INFO(temp,
> + HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_chip_info k8temp_chip_info = {
> + .ops = &k8temp_ops,
> + .info = k8temp_info,
> +};
> +
> static int k8temp_probe(struct pci_dev *pdev,
> const struct pci_device_id *id)
> {
> - int err;
> u8 scfg;
> u32 temp;
> u8 model, stepping;
> struct k8temp_data *data;
> + struct device *hwmon_dev;
>
> data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
> if (!data)
> @@ -231,86 +201,21 @@ static int k8temp_probe(struct pci_dev *pdev,
> data->sensorsp &= ~SEL_CORE;
> }
>
> - data->name = "k8temp";
> mutex_init(&data->update_lock);
> - pci_set_drvdata(pdev, data);
> -
> - /* Register sysfs hooks */
> - err = device_create_file(&pdev->dev,
> - &sensor_dev_attr_temp1_input.dev_attr);
> - if (err)
> - goto exit_remove;
> -
> - /* sensor can be changed and reports something */
> - if (data->sensorsp & SEL_PLACE) {
> - err = device_create_file(&pdev->dev,
> - &sensor_dev_attr_temp2_input.dev_attr);
> - if (err)
> - goto exit_remove;
> - }
> -
> - /* core can be changed and reports something */
> - if (data->sensorsp & SEL_CORE) {
> - err = device_create_file(&pdev->dev,
> - &sensor_dev_attr_temp3_input.dev_attr);
> - if (err)
> - goto exit_remove;
> - if (data->sensorsp & SEL_PLACE) {
> - err = device_create_file(&pdev->dev,
> - &sensor_dev_attr_temp4_input.
> - dev_attr);
> - if (err)
> - goto exit_remove;
> - }
> - }
> -
> - err = device_create_file(&pdev->dev, &dev_attr_name);
> - if (err)
> - goto exit_remove;
>
> - data->hwmon_dev = hwmon_device_register(&pdev->dev);
> + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> + "k8temp",
> + data,
> + &k8temp_chip_info,
> + NULL);
>
> - if (IS_ERR(data->hwmon_dev)) {
> - err = PTR_ERR(data->hwmon_dev);
> - goto exit_remove;
> - }
> -
> - return 0;
> -
> -exit_remove:
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp1_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp2_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp3_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp4_input.dev_attr);
> - device_remove_file(&pdev->dev, &dev_attr_name);
> - return err;
> -}
> -
> -static void k8temp_remove(struct pci_dev *pdev)
> -{
> - struct k8temp_data *data = pci_get_drvdata(pdev);
> -
> - hwmon_device_unregister(data->hwmon_dev);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp1_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp2_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp3_input.dev_attr);
> - device_remove_file(&pdev->dev,
> - &sensor_dev_attr_temp4_input.dev_attr);
> - device_remove_file(&pdev->dev, &dev_attr_name);
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> }
>
> static struct pci_driver k8temp_driver = {
> .name = "k8temp",
> .id_table = k8temp_ids,
> .probe = k8temp_probe,
> - .remove = k8temp_remove,
> };
>
> module_pci_driver(k8temp_driver);
