On Mon, Jul 15, 2019 at 06:33:55PM +0200, Björn Gerhart wrote: > Hi Guenter, > > the patch was created against kernel 5.1.15. Is the corresponding „baseline“ 5.1 then? > The patch doesn't apply against v5.1.15 either. Do you have other local changes to the same file in your branch ? Thanks, Guenter > - Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP > - added missed NCT6106_REG_TOLERANCE_H > > Signed-off-by: Bjoern Gerhart <gerhart@xxxxxxxxx> > — > Index: nct6775.c > =================================================================== > --- nct6775.c (revision 16326) > +++ nct6775.c (working copy) > @@ -866,7 +866,7 @@ > static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 }; > static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 }; > static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a }; > -static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x17c }; > +static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b }; > static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c }; > static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d }; > > @@ -3778,6 +3778,7 @@ > data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME; > data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME; > data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME; > + data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H; > data->REG_PWM[0] = NCT6106_REG_PWM; > data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT; > data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT; > > >