The nct6116 is the successor model of nct6106. Mainly I’m unsure about my changes related to:
- NCT6116_BEEP_BITS
- int cr24 (cr23 is new, and I’m unsure if the code has to get modified therefore)
- NCT6116_REG_FAN_PULSES
- NCT6116_FAN_PULSE_SHIFT
- NCT6116_ALARM_BITS
With the nct6116 wired on my mainboard, the sensors command seems to work as I would expect.
Index: nct6775.c
===================================================================
--- nct6775.c (revision 16313)
+++ nct6775.c (working copy)
@@ -34,6 +34,7 @@
*
* Chip #vin #fan #pwm #temp chip IDs man ID
* nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3
+ * nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3
* nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
@@ -72,12 +73,13 @@
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
- nct6795, nct6796, nct6797, nct6798 };
+enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
+ nct6793, nct6795, nct6796, nct6797, nct6798 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
"nct6106",
+ "nct6116",
"nct6775",
"nct6776",
"nct6779",
@@ -92,6 +94,7 @@
static const char * const nct6775_sio_names[] __initconst = {
"NCT6106D",
+ "NCT6116D",
"NCT6775F",
"NCT6776D/F",
"NCT6779D",
@@ -129,6 +132,7 @@
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_NCT6106_ID 0xc450
+#define SIO_NCT6116_ID 0xd280
#define SIO_NCT6775_ID 0xb470
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
@@ -819,18 +823,29 @@
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09 };
static const u16 NCT6106_REG_TEMP[] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15 };
+static const u16 NCT6116_REG_TEMP[] = { 0x10, 0x11, 0x12 };
static const u16 NCT6106_REG_TEMP_MON[] = { 0x18, 0x19, 0x1a };
static const u16 NCT6106_REG_TEMP_HYST[] = {
0xc3, 0xc7, 0xcb, 0xcf, 0xd3, 0xd7 };
+static const u16 NCT6116_REG_TEMP_HYST[] = {
+ 0xc3, 0xc7, 0xcb };
static const u16 NCT6106_REG_TEMP_OVER[] = {
0xc2, 0xc6, 0xca, 0xce, 0xd2, 0xd6 };
+static const u16 NCT6116_REG_TEMP_OVER[] = {
+ 0xc2, 0xc6, 0xca };
static const u16 NCT6106_REG_TEMP_CRIT_L[] = {
0xc0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4 };
+static const u16 NCT6116_REG_TEMP_CRIT_L[] = {
+ 0xc0, 0xc4, 0xc8 };
static const u16 NCT6106_REG_TEMP_CRIT_H[] = {
0xc1, 0xc5, 0xc9, 0xcf, 0xd1, 0xd5 };
+static const u16 NCT6116_REG_TEMP_CRIT_H[] = {
+ 0xc1, 0xc5, 0xc9 };
static const u16 NCT6106_REG_TEMP_OFFSET[] = { 0x311, 0x312, 0x313 };
static const u16 NCT6106_REG_TEMP_CONFIG[] = {
0xb7, 0xb8, 0xb9, 0xba, 0xbb, 0xbc };
+static const u16 NCT6116_REG_TEMP_CONFIG[] = {
+ 0xb7, 0xb8, 0xb9 };
static const u16 NCT6106_REG_FAN[] = { 0x20, 0x22, 0x24 };
static const u16 NCT6106_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4 };
@@ -845,6 +860,8 @@
static const u16 NCT6106_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130 };
static const u16 NCT6106_REG_TEMP_SOURCE[] = {
0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5 };
+static const u16 NCT6116_REG_TEMP_SOURCE[] = {
+ 0xb0, 0xb1, 0xb2 };
static const u16 NCT6106_REG_CRITICAL_TEMP[] = { 0x11a, 0x12a, 0x13a };
static const u16 NCT6106_REG_CRITICAL_TEMP_TOLERANCE[] = {
@@ -886,6 +903,16 @@
48, -1 /* intrusion0, intrusion1 */
};
+static const s8 NCT6116_ALARM_BITS[] = {
+ 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
+ 9, -1, -1, -1, -1, -1, -1, /* in8..in14 */
+ -1, /* unused */
+ 32, 33, 34, -1, -1, /* fan1..fan5 */
+ -1, -1, -1, /* unused */
+ 16, 17, 18, /* temp1..temp3 */
+ 48, -1 /* intrusion0, intrusion1 */
+};
+
static const u16 NCT6106_REG_BEEP[NUM_REG_BEEP] = {
0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4 };
@@ -1308,6 +1335,10 @@
return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
reg == 0xe0 || reg == 0xe2 || reg == 0xe4 ||
reg == 0x111 || reg == 0x121 || reg == 0x131;
+ case nct6116:
+ return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
+ reg == 0xe0 || reg == 0xe2 || reg == 0xe4 ||
+ reg == 0x111 || reg == 0x121 || reg == 0x131;
case nct6775:
return (((reg & 0xff00) == 0x100 ||
(reg & 0xff00) == 0x200) &&
@@ -1687,6 +1718,7 @@
data->auto_pwm[i][data->auto_pwm_num] = 0xff;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3123,6 +3155,7 @@
case nct6776:
break; /* always enabled, nothing to do */
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3549,6 +3582,11 @@
fan3pin = !(cr24 & 0x80);
pwm3pin = cr24 & 0x08;
+ } else if (data->kind == nct6116) {
+ int cr24 = superio_inb(sioreg, 0x24);
+
+ fan3pin = !(cr24 & 0x80);
+ pwm3pin = cr24 & 0x08;
} else {
/*
* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
@@ -3820,6 +3858,78 @@
reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H;
break;
+ case nct6116:
+ data->in_num = 9;
+ data->pwm_num = 3;
+ data->auto_pwm_num = 4;
+ data->temp_fixed_num = 3;
+ data->num_temp_alarms = 3;
+ data->num_temp_beeps = 3;
+
+ data->fan_from_reg = fan_from_reg13;
+ data->fan_from_reg_min = fan_from_reg13;
+
+ data->temp_label = nct6776_temp_label;
+ data->temp_mask = NCT6776_TEMP_MASK;
+ data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
+
+ data->REG_VBAT = NCT6106_REG_VBAT;
+ data->REG_DIODE = NCT6106_REG_DIODE;
+ data->DIODE_MASK = NCT6106_DIODE_MASK;
+ data->REG_VIN = NCT6106_REG_IN;
+ data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN;
+ data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX;
+ data->REG_TARGET = NCT6106_REG_TARGET;
+ data->REG_FAN = NCT6106_REG_FAN;
+ data->REG_FAN_MODE = NCT6106_REG_FAN_MODE;
+ data->REG_FAN_MIN = NCT6106_REG_FAN_MIN;
+ data->REG_FAN_PULSES = NCT6106_REG_FAN_PULSES;
+ data->FAN_PULSE_SHIFT = NCT6106_FAN_PULSE_SHIFT;
+ data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME;
+ data->REG_PWM[0] = NCT6106_REG_PWM;
+ data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT;
+ data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP;
+ data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE;
+ data->REG_PWM_READ = NCT6106_REG_PWM_READ;
+ data->REG_PWM_MODE = NCT6106_REG_PWM_MODE;
+ data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6106_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6106_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6106_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6106_REG_CRITICAL_TEMP_TOLERANCE;
+ data->REG_CRITICAL_PWM_ENABLE = NCT6106_REG_CRITICAL_PWM_ENABLE;
+ data->CRITICAL_PWM_ENABLE_MASK
+ = NCT6106_CRITICAL_PWM_ENABLE_MASK;
+ data->REG_CRITICAL_PWM = NCT6106_REG_CRITICAL_PWM;
+ data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET;
+ data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6106_REG_TEMP_SEL;
+ data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL;
+ data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP;
+ data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL;
+ data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE;
+ data->REG_ALARM = NCT6106_REG_ALARM;
+ data->ALARM_BITS = NCT6116_ALARM_BITS;
+ data->REG_BEEP = NCT6106_REG_BEEP;
+ data->BEEP_BITS = NCT6106_BEEP_BITS;
+
+ reg_temp = NCT6116_REG_TEMP;
+ reg_temp_mon = NCT6106_REG_TEMP_MON;
+ num_reg_temp = ARRAY_SIZE(NCT6116_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON);
+ reg_temp_over = NCT6116_REG_TEMP_OVER;
+ reg_temp_hyst = NCT6116_REG_TEMP_HYST;
+ reg_temp_config = NCT6116_REG_TEMP_CONFIG;
+ reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE;
+ reg_temp_crit = NCT6106_REG_TEMP_CRIT;
+ reg_temp_crit_l = NCT6116_REG_TEMP_CRIT_L;
+ reg_temp_crit_h = NCT6116_REG_TEMP_CRIT_H;
+
+ break;
case nct6775:
data->in_num = 9;
data->pwm_num = 3;
@@ -4365,6 +4475,7 @@
data->have_vid = (cr2a & 0x60) == 0x40;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -4396,6 +4507,9 @@
case nct6106:
tmp |= 0xe0;
break;
+ case nct6116:
+ tmp |= 0xe0;
+ break;
case nct6775:
tmp |= 0x1e;
break;
@@ -4589,6 +4703,9 @@
case SIO_NCT6106_ID:
sio_data->kind = nct6106;
break;
+ case SIO_NCT6116_ID:
+ sio_data->kind = nct6116;
+ break;
case SIO_NCT6775_ID:
sio_data->kind = nct6775;
break;
