From: Christian Schneider <cschneider@xxxxxxxxxxxxx> This makes it possible to use the hwmon_dev in fan_alarm_notify(). Otherwise it would be possible, that a interupt arrives and fan_alarm_notify() is executed, before hwmon_dev is initialized. Signed-off-by: Christian Schneider <cschneider@xxxxxxxxxxxxx> --- drivers/hwmon/gpio-fan.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 84753680a4e8..a962a9ee7225 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -510,13 +510,6 @@ static int gpio_fan_probe(struct platform_device *pdev) platform_set_drvdata(pdev, fan_data); mutex_init(&fan_data->lock); - /* Configure alarm GPIO if available. */ - if (fan_data->alarm_gpio) { - err = fan_alarm_init(fan_data); - if (err) - return err; - } - /* Configure control GPIOs if available. */ if (fan_data->gpios && fan_data->num_gpios > 0) { if (!fan_data->speed || fan_data->num_speed <= 1) @@ -535,6 +528,13 @@ static int gpio_fan_probe(struct platform_device *pdev) if (IS_ERR(fan_data->hwmon_dev)) return PTR_ERR(fan_data->hwmon_dev); + /* Configure alarm GPIO if available. */ + if (fan_data->alarm_gpio) { + err = fan_alarm_init(fan_data); + if (err) + return err; + } + /* Optional cooling device register for Device tree platforms */ fan_data->cdev = devm_thermal_of_cooling_device_register(dev, np, "gpio-fan", fan_data, &gpio_fan_cool_ops); -- 2.22.0