Re: [v2 3/3] hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 01, 2019 at 05:32:29AM +0000, Amy.Shih@xxxxxxxxxxxxxxxx wrote:
> From: "amy.shih" <amy.shih@xxxxxxxxxxxxxxxx>
> 
> NCT-7904D also supports reading of channel limitation registers
> and SMI status registers for fan, voltage and temperature monitoring,
> and also supports reading of temperature sensor type which is thermal diode,
> thermistor, AMD SB-TSI or Intel PECI, thus add below sysfs nodes:
> 
> -fan[1-*]_min
> -fan[1-*]_alarm
> -in[1-*]_min
> -in[1-*]_max
> -in[1-*]_alarm
> -temp[1-*]_max
> -temp[1-*]_max_hyst
> -temp[1-*]_crit
> -temp[1-*]_crit_hyst
> -temp[1-*]_alarm
> -temp[1-*]_type
> 
> Signed-off-by: amy.shih <amy.shih@xxxxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Fix bad fallthrough in various switch statements.
> - Fix the wrong declared of tmp as u8 in nct7904_write_in, declared tmp to int.
> - Fix incorrect register setting of voltage.
> - Fix incorrect register bit mapping of temperature alarm.
> - Fix wrong return code 0x1fff in function nct7904_write_fan.
> - Delete wrong comment in function nct7904_write_in.
> - Fix wrong attribute names for temperature.
> - Fix wrong registers setting for temperature.
> ---
>  drivers/hwmon/nct7904.c | 469 ++++++++++++++++++++++++++++++++++++----
>  1 file changed, 424 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index 710c30562fc1..d842c10ba11f 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -46,10 +46,33 @@
>  #define DTS_T_CTRL1_REG		0x27
>  #define VT_ADC_MD_REG		0x2E
>  
> +#define VSEN1_HV_LL_REG		0x02	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_LV_LL_REG		0x03	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_HV_HL_REG		0x00	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_LV_HL_REG		0x01	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define SMI_STS1_REG		0xC1	/* Bank 0; SMI Status Register */
> +#define SMI_STS5_REG		0xC5	/* Bank 0; SMI Status Register */
> +#define SMI_STS7_REG		0xC7	/* Bank 0; SMI Status Register */
> +#define SMI_STS8_REG		0xC8	/* Bank 0; SMI Status Register */
> +
>  #define VSEN1_HV_REG		0x40	/* Bank 0; 2 regs (HV/LV) per sensor */
>  #define TEMP_CH1_HV_REG		0x42	/* Bank 0; same as VSEN2_HV */
>  #define LTD_HV_REG		0x62	/* Bank 0; 2 regs in VSEN range */
> +#define LTD_HV_HL_REG		0x44	/* Bank 1; 1 reg for LTD */
> +#define LTD_LV_HL_REG		0x45	/* Bank 1; 1 reg for LTD */
> +#define LTD_HV_LL_REG		0x46	/* Bank 1; 1 reg for LTD */
> +#define LTD_LV_LL_REG		0x47	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_CH_REG		0x05	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_W_REG		0x06	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_WH_REG		0x07	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_C_REG		0x04	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_C_REG	0x90	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_CH_REG	0x91	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_W_REG	0x92	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_WH_REG	0x93	/* Bank 1; 1 reg per sensor */
>  #define FANIN1_HV_REG		0x80	/* Bank 0; 2 regs (HV/LV) per sensor */
> +#define FANIN1_HV_HL_REG	0x60	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define FANIN1_LV_HL_REG	0x61	/* Bank 1; 2 regs (HV/LV) per sensor */
>  #define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */
>  
>  #define PRTS_REG		0x03	/* Bank 2 */
> @@ -58,6 +81,8 @@
>  #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
>  #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
>  
> +#define ENABLE_TSI	BIT(1)
> +
>  static const unsigned short normal_i2c[] = {
>  	0x2d, 0x2e, I2C_CLIENT_END
>  };
> @@ -72,6 +97,7 @@ struct nct7904_data {
>  	u8 fan_mode[FANCTL_MAX];
>  	u8 enable_dts;
>  	u8 has_dts;
> +	u8 temp_mode; /* 0: TR mode, 1: TD mode */
>  };
>  
>  /* Access functions */
> @@ -170,6 +196,25 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
>  			rpm = 1350000 / cnt;
>  		*val = rpm;
>  		return 0;
> +	case hwmon_fan_min:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 FANIN1_HV_HL_REG + channel * 2);
> +		if (ret < 0)
> +			return ret;
> +		cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f);
> +		if (cnt == 0x1fff)
> +			rpm = 0;
> +		else
> +			rpm = 1350000 / cnt;

This is problematic if cnt == 0 (I understand that existing code further above
has the same problem, so it would be ok to fix both with a separate patch).

> +		*val = rpm;
> +		return 0;
> +	case hwmon_fan_alarm:
> +		ret = nct7904_read_reg(data, BANK_0,
> +				       SMI_STS7_REG + (channel >> 3));
> +		if (ret < 0)
> +			return ret;
> +		*val = (ret >> (channel & 0x07)) & 1;
> +		return 0;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -179,8 +224,20 @@ static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel)
>  {
>  	const struct nct7904_data *data = _data;
>  
> -	if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel))
> -		return 0444;
> +	switch (attr) {
> +	case hwmon_fan_input:
> +	case hwmon_fan_alarm:
> +		if (data->fanin_mask & (1 << channel))
> +			return 0444;
> +		break;
> +	case hwmon_fan_min:
> +		if (data->fanin_mask & (1 << channel))
> +			return 0644;
> +		break;
> +	default:
> +		break;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -211,6 +268,37 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
>  			volt *= 6; /* 0.006V scale */
>  		*val = volt;
>  		return 0;
> +	case hwmon_in_min:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 VSEN1_HV_LL_REG + index * 4);
> +		if (ret < 0)
> +			return ret;
> +		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
> +		if (index < 14)
> +			volt *= 2; /* 0.002V scale */
> +		else
> +			volt *= 6; /* 0.006V scale */
> +		*val = volt;
> +		return 0;
> +	case hwmon_in_max:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 VSEN1_HV_HL_REG + index * 4);
> +		if (ret < 0)
> +			return ret;
> +		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
> +		if (index < 14)
> +			volt *= 2; /* 0.002V scale */
> +		else
> +			volt *= 6; /* 0.006V scale */
> +		*val = volt;
> +		return 0;
> +	case hwmon_in_alarm:
> +		ret = nct7904_read_reg(data, BANK_0,
> +				       SMI_STS1_REG + (index >> 3));
> +		if (ret < 0)
> +			return ret;
> +		*val = (ret >> (index & 0x07)) & 1;
> +		return 0;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -221,9 +309,20 @@ static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel)
>  	const struct nct7904_data *data = _data;
>  	int index = nct7904_chan_to_index[channel];
>  
> -	if (channel > 0 && attr == hwmon_in_input &&
> -	    (data->vsen_mask & BIT(index)))
> -		return 0444;
> +	switch (attr) {
> +	case hwmon_in_input:
> +	case hwmon_in_alarm:
> +		if (channel > 0 && (data->vsen_mask & BIT(index)))
> +			return 0444;
> +		break;
> +	case hwmon_in_min:
> +	case hwmon_in_max:
> +		if (channel > 0 && (data->vsen_mask & BIT(index)))
> +			return 0644;
> +		break;
> +	default:
> +		break;
> +	}
>  
>  	return 0;
>  }
> @@ -233,6 +332,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  {
>  	struct nct7904_data *data = dev_get_drvdata(dev);
>  	int ret, temp;
> +	unsigned int reg1, reg2, reg3;
>  
>  	switch (attr) {
>  	case hwmon_temp_input:
> @@ -250,16 +350,100 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  		temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
>  		*val = sign_extend32(temp, 10) * 125;
>  		return 0;
> +	case hwmon_temp_alarm:
> +		if (channel < 5) {
> +			ret = nct7904_read_reg(data, BANK_0,
> +					       SMI_STS1_REG);
> +			if (ret < 0)
> +				return ret;
> +			*val = (ret >> (((channel * 2) + 1) & 0x07)) & 1;
> +		} else {
> +			if ((channel - 5) < 4) {
> +				ret = nct7904_read_reg(data, BANK_0,
> +						       SMI_STS7_REG +
> +						       ((channel - 5) >> 3));
> +				if (ret < 0)
> +					return ret;
> +				*val = (ret >> ((channel - 5) & 0x07)) & 1;
> +			} else {
> +				ret = nct7904_read_reg(data, BANK_0,
> +						       SMI_STS8_REG +
> +						       ((channel - 5) >> 3));
> +				if (ret < 0)
> +					return ret;
> +				*val = (ret >> (((channel - 5) & 0x07) - 4))
> +							& 1;
> +			}
> +		}
> +		return 0;
> +	case hwmon_temp_type:
> +		if (channel < 5) {
> +			if ((data->tcpu_mask >> channel) & 0x01) {
> +				if ((data->temp_mode >> channel) & 0x01)
> +					*val = 3; /* TD */
> +				else
> +					*val = 4; /* TR */
> +			} else {
> +				*val = 0;
> +			}
> +		} else {
> +			if ((data->has_dts >> (channel - 5)) & 0x01) {
> +				if (data->enable_dts & ENABLE_TSI)
> +					*val = 5; /* TSI */
> +				else
> +					*val = 6; /* PECI */
> +			} else {
> +				*val = 0;
> +			}
> +		}
> +		return 0;
> +	case hwmon_temp_max:
> +		reg1 = LTD_HV_HL_REG;
> +		reg2 = TEMP_CH1_W_REG;
> +		reg3 = DTS_T_CPU1_W_REG;
> +		break;
> +	case hwmon_temp_max_hyst:
> +		reg1 = LTD_LV_HL_REG;
> +		reg2 = TEMP_CH1_WH_REG;
> +		reg3 = DTS_T_CPU1_WH_REG;
> +		break;
> +	case hwmon_temp_crit:
> +		reg1 = LTD_HV_LL_REG;
> +		reg2 = TEMP_CH1_C_REG;
> +		reg3 = DTS_T_CPU1_C_REG;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		reg1 = LTD_LV_LL_REG;
> +		reg2 = TEMP_CH1_CH_REG;
> +		reg3 = DTS_T_CPU1_CH_REG;
> +		break;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> +
> +	if (channel == 4)
> +		ret = nct7904_read_reg(data, BANK_1, reg1);
> +	else if (channel < 5)
> +		ret = nct7904_read_reg(data, BANK_1,
> +				       reg2 + channel * 8);
> +	else
> +		ret = nct7904_read_reg(data, BANK_1,
> +				       reg3 + (channel - 5) * 4);
> +
I must admit that I am not too happy about this code, since it moves code
which should be in the case statement with code running afterwards.
A helper function to do the actual read would be a bit nicer

	case hwmon_temp_max:
		ret = nct7904_read_limit(data, channel, LTD_HV_HL_REG,
					 TEMP_CH1_W_REG, DTS_T_CPU1_W_REG);
		if (ret < 0)
			return ret;
		*val = ret * 1000;
		return 0;
	...

I undersatand that is a bit of additional code, but it would be much
cleaner. I'll accept the current code, though, if you disagree.

> +	if (ret < 0)
> +		return ret;
> +	*val = ret * 1000;
> +	return 0;
>  }
>  
>  static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
>  {
>  	const struct nct7904_data *data = _data;
>  
> -	if (attr == hwmon_temp_input) {
> +	switch (attr) {
> +	case hwmon_temp_input:
> +	case hwmon_temp_alarm:
> +	case hwmon_temp_type:
>  		if (channel < 5) {
>  			if (data->tcpu_mask & BIT(channel))
>  				return 0444;
> @@ -267,6 +451,21 @@ static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
>  			if (data->has_dts & BIT(channel - 5))
>  				return 0444;
>  		}
> +		break;
> +	case hwmon_temp_max:
> +	case hwmon_temp_max_hyst:
> +	case hwmon_temp_crit:
> +	case hwmon_temp_crit_hyst:
> +		if (channel < 5) {
> +			if (data->tcpu_mask & BIT(channel))
> +				return 0644;
> +		} else {
> +			if (data->has_dts & BIT(channel - 5))
> +				return 0644;
> +		}
> +		break;
> +	default:
> +		break;
>  	}
>  
>  	return 0;
> @@ -297,6 +496,137 @@ static int nct7904_read_pwm(struct device *dev, u32 attr, int channel,
>  	}
>  }
>  
> +static int nct7904_write_temp(struct device *dev, u32 attr, int channel,
> +			      long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret;
> +	unsigned int reg1, reg2, reg3;
> +
> +	val = clamp_val(val / 1000, -128, 127);
> +
> +	switch (attr) {
> +	case hwmon_temp_max:
> +		reg1 = LTD_HV_HL_REG;
> +		reg2 = TEMP_CH1_W_REG;
> +		reg3 = DTS_T_CPU1_W_REG;
> +		break;
> +	case hwmon_temp_max_hyst:
> +		reg1 = LTD_LV_HL_REG;
> +		reg2 = TEMP_CH1_WH_REG;
> +		reg3 = DTS_T_CPU1_WH_REG;
> +		break;
> +	case hwmon_temp_crit:
> +		reg1 = LTD_HV_LL_REG;
> +		reg2 = TEMP_CH1_C_REG;
> +		reg3 = DTS_T_CPU1_C_REG;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		reg1 = LTD_LV_LL_REG;
> +		reg2 = TEMP_CH1_CH_REG;
> +		reg3 = DTS_T_CPU1_CH_REG;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +	if (channel == 4)
> +		ret = nct7904_write_reg(data, BANK_1, reg1, val);
> +	else if (channel < 5)
> +		ret = nct7904_write_reg(data, BANK_1,
> +					reg2 + channel * 8, val);
> +	else
> +		ret = nct7904_write_reg(data, BANK_1,
> +					reg3 + (channel - 5) * 4, val);
> +
Same as above.

> +	return ret;
> +}
> +
> +static int nct7904_write_fan(struct device *dev, u32 attr, int channel,
> +			     long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret;
> +	u8 tmp;
> +
> +	switch (attr) {
> +	case hwmon_fan_min:
> +		if (val <= 0)
> +			return 0;

This is odd: It silently accepts values <= 0, but doesn't do anything.
Is that really what you want ? Why not something like:

		if (val <= 0)
			val = 1;

> +
> +		val = clamp_val((1350000 + (val >> 1)) / val, 1, 0x1fff);

It took me a while to understand the calculation above. Something like
		val = clamp_val(DIV_ROUND_CLOSEST(1350000, val), 1, 0x1fff);
might be a bit easier to understand.

> +		tmp = (val >> 5) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					FANIN1_HV_HL_REG + channel * 2, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = val & 0x1f;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					FANIN1_LV_HL_REG + channel * 2, tmp);
> +		return ret;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int nct7904_write_in(struct device *dev, u32 attr, int channel,
> +			    long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret, index, tmp;
> +
> +	index = nct7904_chan_to_index[channel];
> +
> +	if (index < 14)
> +		val = val / 2; /* 0.002V scale */
> +	else
> +		val = val / 6; /* 0.006V scale */
> +
> +	val = clamp_val(val, 0, 0x7ff);
> +
> +	switch (attr) {
> +	case hwmon_in_min:
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_LV_LL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp &= ~0x7;
> +		tmp |= val & 0x7;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_LV_LL_REG + index * 4, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_HV_LL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp = (val >> 3) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_HV_LL_REG + index * 4, tmp);
> +		return ret;
> +	case hwmon_in_max:
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_LV_HL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp &= ~0x7;
> +		tmp |= val & 0x7;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_LV_HL_REG + index * 4, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_HV_HL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp = (val >> 3) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_HV_HL_REG + index * 4, tmp);
> +		return ret;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>  static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
>  			     long val)
>  {
> @@ -354,8 +684,14 @@ static int nct7904_write(struct device *dev, enum hwmon_sensor_types type,
>  			 u32 attr, int channel, long val)
>  {
>  	switch (type) {
> +	case hwmon_in:
> +		return nct7904_write_in(dev, attr, channel, val);
> +	case hwmon_fan:
> +		return nct7904_write_fan(dev, attr, channel, val);
>  	case hwmon_pwm:
>  		return nct7904_write_pwm(dev, attr, channel, val);
> +	case hwmon_temp:
> +		return nct7904_write_temp(dev, attr, channel, val);
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -404,51 +740,91 @@ static int nct7904_detect(struct i2c_client *client,
>  
>  static const struct hwmon_channel_info *nct7904_info[] = {
>  	HWMON_CHANNEL_INFO(in,
> -			   HWMON_I_INPUT, /* dummy, skipped in is_visible */
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT),
> +			   /* dummy, skipped in is_visible */
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM),
>  	HWMON_CHANNEL_INFO(fan,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT),
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM),
>  	HWMON_CHANNEL_INFO(pwm,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
>  	HWMON_CHANNEL_INFO(temp,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT),
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST),
>  	NULL
>  };
>  
> @@ -530,11 +906,14 @@ static int nct7904_probe(struct i2c_client *client,
>  	if (ret < 0)
>  		return ret;
>  
> +	data->temp_mode = 0;
>  	for (i = 0; i < 4; i++) {
>  		val = (ret & (0x03 << i)) >> (i * 2);
>  		bit = (1 << i);
>  		if (val == 0)
>  			data->tcpu_mask &= ~bit;
> +		else if (val == 0x1 || val == 0x2)
> +			data->temp_mode |= bit;
>  	}
>  
>  	/* PECI */
> @@ -557,7 +936,7 @@ static int nct7904_probe(struct i2c_client *client,
>  		if (ret < 0)
>  			return ret;
>  		data->has_dts = ret & 0xF;
> -		if (data->enable_dts & 0x2) {
> +		if (data->enable_dts & ENABLE_TSI) {
>  			ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG);
>  			if (ret < 0)
>  				return ret;
> -- 
> 2.17.1
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux