Add a driver to support the Infineon IRPS5401 PMIC. This chip has 5
pages corresponding to 4 switching outputs and one linear (LDO) output.
The switching and LDO outputs have slightly different supported
parameters.
Signed-off-by: Robert Hancock <hancock@xxxxxxxxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 9 ++++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/irps5401.c | 68 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 78 insertions(+)
create mode 100644 drivers/hwmon/pmbus/irps5401.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 30751eb..8eb5bb4 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -64,6 +64,15 @@ config SENSORS_IR38064
This driver can also be built as a module. If so, the module will
be called ir38064.
+config SENSORS_IRPS5401
+ tristate "Infineon IRPS5401"
+ help
+ If you say yes here you get hardware monitoring support for the
+ Infineon IRPS5401 controller.
+
+ This driver can also be built as a module. If so, the module will
+ be called irps5401.
+
config SENSORS_ISL68137
tristate "Intersil ISL68137"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 2219b93..e4a7dd0 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
+obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o
obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
diff --git a/drivers/hwmon/pmbus/irps5401.c b/drivers/hwmon/pmbus/irps5401.c
new file mode 100644
index 0000000..825e9fa
--- /dev/null
+++ b/drivers/hwmon/pmbus/irps5401.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for the Infineon IRPS5401M PMIC.
+ *
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
+ *
+ * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
+ * this driver does not currently support them.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IRPS5401_SW_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | \
+ PMBUS_HAVE_STATUS_INPUT | \
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+ PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+#define IRPS5401_LDO_FUNC (PMBUS_HAVE_VIN | \
+ PMBUS_HAVE_STATUS_INPUT | \
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+ PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+static struct pmbus_driver_info irps5401_info = {
+ .pages = 5,
+ .func[0] = IRPS5401_SW_FUNC,
+ .func[1] = IRPS5401_SW_FUNC,
+ .func[2] = IRPS5401_SW_FUNC,
+ .func[3] = IRPS5401_SW_FUNC,
+ .func[4] = IRPS5401_LDO_FUNC,
+};
+
+static int irps5401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &irps5401_info);
+}
+
+static const struct i2c_device_id irps5401_id[] = {
+ {"irps5401", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, irps5401_id);
+
+static struct i2c_driver irps5401_driver = {
+ .driver = {
+ .name = "irps5401",
+ },
+ .probe = irps5401_probe,
+ .remove = pmbus_do_remove,
+ .id_table = irps5401_id,
+};
+
+module_i2c_driver(irps5401_driver);
+
+MODULE_AUTHOR("Robert Hancock");
+MODULE_DESCRIPTION("PMBus driver for Infineon IRPS5401");
+MODULE_LICENSE("GPL");
+
--
1.8.3.1
