From: "amy.shih" <amy.shih@xxxxxxxxxxxxxxxx> Detect the multi-function of voltage, thermal diode and thermistor from register VT_ADC_MD_REG to set value of tcpu_mask in nct7904_data struct, set temp[1-5]_input the input values TEMP_CH1~4 and LTD of temperature. Set temp[6~13]_input the input values of DTS temperature that correspond to sensors TCPU1~8. Signed-off-by: amy.shih <amy.shih@xxxxxxxxxxxxxxxx> --- drivers/hwmon/nct7904.c | 72 +++++++++++++++++++++++++++++++++++------ 1 file changed, 63 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c index 04516789b070..6a74df6841f0 100644 --- a/drivers/hwmon/nct7904.c +++ b/drivers/hwmon/nct7904.c @@ -4,6 +4,9 @@ * Copyright (c) 2015 Kontron * Author: Vadim V. Vlasov <vvlasov@xxxxxxxxxxxxx> * + * Copyright (c) 2019 Advantech + * Author: Amy.Shih <amy.shih@xxxxxxxxxxxxxxxx> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -59,6 +62,8 @@ #define T_CPU1_HV_REG 0xA0 /* Bank 0; 2 regs (HV/LV) per sensor */ #define PRTS_REG 0x03 /* Bank 2 */ +#define PFE_REG 0x00 /* Bank 2; PECI Function Enable */ +#define TSI_CTRL_REG 0x50 /* Bank 2; TSI Control Register */ #define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */ #define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */ @@ -74,6 +79,8 @@ struct nct7904_data { u32 vsen_mask; u32 tcpu_mask; u8 fan_mode[FANCTL_MAX]; + u8 enable_dts; + u8 has_dts; }; /* Access functions */ @@ -238,11 +245,15 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel, switch (attr) { case hwmon_temp_input: - if (channel == 0) + if (channel == 4) ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); + else if (channel < 5) + ret = nct7904_read_reg16(data, BANK_0, + TEMP_CH1_HV_REG + channel * 4); else ret = nct7904_read_reg16(data, BANK_0, - T_CPU1_HV_REG + (channel - 1) * 2); + T_CPU1_HV_REG + (channel - 5) + * 2); if (ret < 0) return ret; temp = ((ret & 0xff00) >> 5) | (ret & 0x7); @@ -258,11 +269,11 @@ static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel) const struct nct7904_data *data = _data; if (attr == hwmon_temp_input) { - if (channel == 0) { - if (data->vsen_mask & BIT(17)) + if (channel < 5) { + if (data->tcpu_mask & BIT(channel)) return 0444; } else { - if (data->tcpu_mask & BIT(channel - 1)) + if (data->has_dts & BIT(channel - 5)) return 0444; } } @@ -469,6 +480,7 @@ static int nct7904_probe(struct i2c_client *client, struct device *dev = &client->dev; int ret, i; u32 mask; + u8 val, bit; data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL); if (!data) @@ -502,10 +514,52 @@ static int nct7904_probe(struct i2c_client *client, data->vsen_mask = mask; /* CPU_TEMP attributes */ - ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG); - if (ret < 0) - return ret; - data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4); + ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL0_REG); + + if ((ret & 0x6) == 0x6) + data->tcpu_mask |= 1; /* TR1 */ + if ((ret & 0x18) == 0x18) + data->tcpu_mask |= 2; /* TR2 */ + if ((ret & 0x20) == 0x20) + data->tcpu_mask |= 4; /* TR3 */ + if ((ret & 0x80) == 0x80) + data->tcpu_mask |= 8; /* TR4 */ + + /* LTD */ + ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG); + if ((ret & 0x02) == 0x02) + data->tcpu_mask |= 0x10; + + /* Multi-Function detecting for Volt and TR/TD */ + ret = nct7904_read_reg(data, BANK_0, VT_ADC_MD_REG); + + for (i = 0; i < 4; i++) { + val = (ret & (0x03 << i)) >> (i * 2); + bit = (1 << i); + if (val == 0) + data->tcpu_mask &= ~bit; + } + + /* PECI */ + ret = nct7904_read_reg(data, BANK_2, PFE_REG); + if (ret & 0x80) { + data->enable_dts = 1; //Enable DTS & PECI + } else { + ret = nct7904_read_reg(data, BANK_2, TSI_CTRL_REG); + if (ret & 0x80) + data->enable_dts = 0x3; //Enable DTS & TSI + } + + /* Check DTS enable status */ + if (data->enable_dts) { + data->has_dts = + nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG) & 0xF; + if (data->enable_dts & 0x2) { + data->has_dts |= + (nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG) & 0xF) + << 4; + } + } for (i = 0; i < FANCTL_MAX; i++) { ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i); -- 2.17.1