This patchset adds thermal and power management features for FPGA DFL drivers. Both patches are using hwmon as userspace interfaces. Actually this patchset is splitted from patchset [1]. Main changes from v2: - switch to standard hwmon APIs for thermal hwmon: temp1_alarm --> temp1_max temp1_alarm_status --> temp1_max_alarm temp1_crit_status --> temp1_crit_alarm temp1_alarm_policy --> temp1_max_policy - switch to standard hwmon APIs for power hwmon: power1_cap --> power1_max power1_cap_status --> power1_max_alarm power1_crit_status --> power1_crit_alarm v2 version patch could be found here [2] - thermal, [3] - power. Please note that this patchset needs to be applied on top of patchset [4]. Thanks! [1] https://lkml.org/lkml/2019/4/29/227 [2] https://lkml.org/lkml/2019/4/29/211 [3] https://lkml.org/lkml/2019/4/29/213 [4] https://lkml.org/lkml/2019/5/27/11 Wu Hao (2): fpga: dfl: fme: add thermal management support fpga: dfl: fme: add power management support Xu Yilun (1): Documentation: fpga: dfl: add descriptions for thermal/power management interfaces Documentation/ABI/testing/sysfs-platform-dfl-fme | 131 +++++++ Documentation/fpga/dfl.txt | 9 + drivers/fpga/Kconfig | 2 +- drivers/fpga/dfl-fme-main.c | 426 +++++++++++++++++++++++ 4 files changed, 567 insertions(+), 1 deletion(-) -- 1.8.3.1