Re: [PATCH v6] hwmon: (pmbus/isl68137): Add driver for Intersil ISL68137 PWM Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 15, 2019 at 3:28 PM Patrick Venture <venture@xxxxxxxxxx> wrote:
>
> From: Maxim Sloyko <maxims@xxxxxxxxxx>
>
> Intersil ISL68137 is a digital output 7-phase configurable PWM
> controller with an AVSBus interface.
>
> Signed-off-by: Maxim Sloyko <maxims@xxxxxxxxxx>
> Signed-off-by: Robert Lippert <rlippert@xxxxxxxxxx>
> Signed-off-by: Patrick Venture <venture@xxxxxxxxxx>

I trim out a bunch beneath this, so maybe that's causing corruption?
For instance, all the Google footers, etc, is cut out manually.  If
that's an issue for the patch email hash, I can do that in the commit
log -- since it may include the commit message.

> ---
> v6:
>  Fix reversed logic bug.
> v5:
>  Drop extra parens
>  Drop extra parameter check
> v4:
>  Use kstrtobool
>  Cleanup parens
>  Use rc instead of temporary int
>  Delete unnecessary coment
>  Add remove to driver structure
> v3:
>  Added missing driver documentation
>  Cleaned up goto statements.
>  Add missing error check on pmbus_read_word_data
>  Transitioned to use SENSOR_DEVICE_ATTR_RW
>  Renamed enabled attribute to enable
>  Set up an attribute_group for the enable attribute and added to pmbus_info
>  Removed the boilerplate driver remove method
> v2:
>  Fixed bad header ordering.
> v1:
>  Original new patchset with fixes from Rob Lippert.
> ---
>  Documentation/hwmon/isl68137   |  72 ++++++++++++++
>  drivers/hwmon/pmbus/Kconfig    |   9 ++
>  drivers/hwmon/pmbus/Makefile   |   1 +
>  drivers/hwmon/pmbus/isl68137.c | 169 +++++++++++++++++++++++++++++++++
>  4 files changed, 251 insertions(+)
>  create mode 100644 Documentation/hwmon/isl68137
>  create mode 100644 drivers/hwmon/pmbus/isl68137.c
>
> diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137
> new file mode 100644
> index 0000000000000..92e5c5fc5b777
> --- /dev/null
> +++ b/Documentation/hwmon/isl68137
> @@ -0,0 +1,72 @@
> +Kernel driver isl68137
> +======================
> +
> +Supported chips:
> +  * Intersil ISL68137
> +    Prefix: 'isl68137'
> +    Addresses scanned: -
> +    Datasheet: Publicly available at the Intersil website
> +      https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
> +
> +Authors:
> +        Maxim Sloyko <maxims@xxxxxxxxxx>
> +        Robert Lippert <rlippert@xxxxxxxxxx>
> +        Patrick Venture <venture@xxxxxxxxxx>
> +
> +Description
> +-----------
> +
> +Intersil ISL68137 is a digital output 7-phase configurable PWM
> +controller with an AVSBus interface.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not probe for PMBus devices. You will have to instantiate
> +devices explicitly.
> +
> +The ISL68137 AVS operation mode must be enabled/disabled at runtime.
> +
> +Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute.
> +
> +Additional Sysfs attributes
> +---------------------------
> +
> +avs(0|1)_enable                Controls the AVS state of each rail.
> +
> +curr1_label            "iin"
> +curr1_input            Measured input current
> +curr1_crit             Critical maximum current
> +curr1_crit_alarm       Current critical high alarm
> +
> +curr[2-3]_label                "iout[1-2]"
> +curr[2-3]_input                Measured output current
> +curr[2-3]_crit         Critical maximum current
> +curr[2-3]_crit_alarm   Current critical high alarm
> +
> +in1_label              "vin"
> +in1_input              Measured input voltage
> +in1_lcrit              Critical minimum input voltage
> +in1_lcrit_alarm                Input voltage critical low alarm
> +in1_crit               Critical maximum input voltage
> +in1_crit_alarm         Input voltage critical high alarm
> +
> +in[2-3]_label          "vout[1-2]"
> +in[2-3]_input          Measured output voltage
> +in[2-3]_lcrit          Critical minimum output voltage
> +in[2-3]_lcrit_alarm    Output voltage critical low alarm
> +in[2-3]_crit           Critical maximum output voltage
> +in[2-3]_crit_alarm     Output voltage critical high alarm
> +
> +power1_label           "pin"
> +power1_input           Measured input power
> +power1_alarm           Input power high alarm
> +
> +power[2-3]_label       "pout[1-2]"
> +power[2-3]_input       Measured output power
> +
> +temp[1-3]_input                Measured temperature
> +temp[1-3]_crit         Critical high temperature
> +temp[1-3]_crit_alarm   Chip temperature critical high alarm
> +temp[1-3]_max          Maximum temperature
> +temp[1-3]_max_alarm    Chip temperature high alarm
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index de87abab990e5..7edab7e30eaf9 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -63,6 +63,15 @@ config SENSORS_IR38064
>           This driver can also be built as a module. If so, the module will
>           be called ir38064.
>
> +config SENSORS_ISL68137
> +       tristate "Intersil ISL68137"
> +       help
> +         If you say yes here you get hardware monitoring support for Intersil
> +         ISL68137.
> +
> +         This driver can also be built as a module. If so, the module will
> +         be called isl68137.
> +
>  config SENSORS_LM25066
>         tristate "National Semiconductor LM25066 and compatibles"
>         help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 7d1fa6b3c8c93..2219b93003167 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275)   += adm1275.o
>  obj-$(CONFIG_SENSORS_IBM_CFFPS)        += ibm-cffps.o
>  obj-$(CONFIG_SENSORS_IR35221)  += ir35221.o
>  obj-$(CONFIG_SENSORS_IR38064)  += ir38064.o
> +obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
>  obj-$(CONFIG_SENSORS_LM25066)  += lm25066.o
>  obj-$(CONFIG_SENSORS_LTC2978)  += ltc2978.o
>  obj-$(CONFIG_SENSORS_LTC3815)  += ltc3815.o
> diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c
> new file mode 100644
> index 0000000000000..515596c92fe1c
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/isl68137.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Intersil ISL68137
> + *
> + * Copyright (c) 2017 Google Inc
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/string.h>
> +#include <linux/sysfs.h>
> +#include "pmbus.h"
> +
> +#define ISL68137_VOUT_AVS      0x30
> +
> +static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client,
> +                                            int page,
> +                                            char *buf)
> +{
> +       int val = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
> +
> +       return sprintf(buf, "%d\n",
> +                      (val & ISL68137_VOUT_AVS) == ISL68137_VOUT_AVS ? 1 : 0);
> +}
> +
> +static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client,
> +                                             int page,
> +                                             const char *buf, size_t count)
> +{
> +       int rc, op_val;
> +       bool result;
> +
> +       rc = kstrtobool(buf, &result);
> +       if (rc)
> +               return rc;
> +
> +       op_val = result ? ISL68137_VOUT_AVS : 0;
> +
> +       /*
> +        * Writes to VOUT setpoint over AVSBus will persist after the VRM is
> +        * switched to PMBus control. Switching back to AVSBus control
> +        * restores this persisted setpoint rather than re-initializing to
> +        * PMBus VOUT_COMMAND. Writing VOUT_COMMAND first over PMBus before
> +        * enabling AVS control is the workaround.
> +        */
> +       if (op_val == ISL68137_VOUT_AVS) {
> +               rc = pmbus_read_word_data(client, page, PMBUS_VOUT_COMMAND);
> +               if (rc < 0)
> +                       return rc;
> +
> +               rc = pmbus_write_word_data(client, page, PMBUS_VOUT_COMMAND,
> +                                          rc);
> +               if (rc < 0)
> +                       return rc;
> +       }
> +
> +       rc = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
> +                                   ISL68137_VOUT_AVS, op_val);
> +
> +       return (rc < 0) ? rc : count;
> +}
> +
> +static ssize_t isl68137_avs_enable_show(struct device *dev,
> +                                       struct device_attribute *devattr,
> +                                       char *buf)
> +{
> +       struct i2c_client *client = to_i2c_client(dev->parent);
> +       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> +       return isl68137_avs_enable_show_page(client, attr->index, buf);
> +}
> +
> +static ssize_t isl68137_avs_enable_store(struct device *dev,
> +                               struct device_attribute *devattr,
> +                               const char *buf, size_t count)
> +{
> +       struct i2c_client *client = to_i2c_client(dev->parent);
> +       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> +       return isl68137_avs_enable_store_page(client, attr->index, buf, count);
> +}
> +
> +static SENSOR_DEVICE_ATTR_RW(avs0_enable, isl68137_avs_enable, 0);
> +static SENSOR_DEVICE_ATTR_RW(avs1_enable, isl68137_avs_enable, 1);
> +
> +static struct attribute *enable_attrs[] = {
> +       &sensor_dev_attr_avs0_enable.dev_attr.attr,
> +       &sensor_dev_attr_avs1_enable.dev_attr.attr,
> +       NULL,
> +};
> +
> +static const struct attribute_group enable_group = {
> +       .attrs = enable_attrs,
> +};
> +
> +static const struct attribute_group *attribute_groups[] = {
> +       &enable_group,
> +       NULL,
> +};
> +
> +static struct pmbus_driver_info isl68137_info = {
> +       .pages = 2,
> +       .format[PSC_VOLTAGE_IN] = direct,
> +       .format[PSC_VOLTAGE_OUT] = direct,
> +       .format[PSC_CURRENT_IN] = direct,
> +       .format[PSC_CURRENT_OUT] = direct,
> +       .format[PSC_POWER] = direct,
> +       .format[PSC_TEMPERATURE] = direct,
> +       .m[PSC_VOLTAGE_IN] = 1,
> +       .b[PSC_VOLTAGE_IN] = 0,
> +       .R[PSC_VOLTAGE_IN] = 3,
> +       .m[PSC_VOLTAGE_OUT] = 1,
> +       .b[PSC_VOLTAGE_OUT] = 0,
> +       .R[PSC_VOLTAGE_OUT] = 3,
> +       .m[PSC_CURRENT_IN] = 1,
> +       .b[PSC_CURRENT_IN] = 0,
> +       .R[PSC_CURRENT_IN] = 2,
> +       .m[PSC_CURRENT_OUT] = 1,
> +       .b[PSC_CURRENT_OUT] = 0,
> +       .R[PSC_CURRENT_OUT] = 1,
> +       .m[PSC_POWER] = 1,
> +       .b[PSC_POWER] = 0,
> +       .R[PSC_POWER] = 0,
> +       .m[PSC_TEMPERATURE] = 1,
> +       .b[PSC_TEMPERATURE] = 0,
> +       .R[PSC_TEMPERATURE] = 0,
> +       .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
> +           | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
> +           | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
> +           | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> +           | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
> +       .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> +           | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
> +       .groups = attribute_groups,
> +};
> +
> +static int isl68137_probe(struct i2c_client *client,
> +                         const struct i2c_device_id *id)
> +{
> +       return pmbus_do_probe(client, id, &isl68137_info);
> +}
> +
> +static const struct i2c_device_id isl68137_id[] = {
> +       {"isl68137", 0},
> +       {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, isl68137_id);
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver isl68137_driver = {
> +       .driver = {
> +                  .name = "isl68137",
> +                  },
> +       .probe = isl68137_probe,
> +       .remove = pmbus_do_remove,
> +       .id_table = isl68137_id,
> +};
> +
> +module_i2c_driver(isl68137_driver);
> +
> +MODULE_AUTHOR("Maxim Sloyko <maxims@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("PMBus driver for Intersil ISL68137");
> +MODULE_LICENSE("GPL");
> --
> 2.21.0.392.gf8f6787159e-goog
>



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux