On Wed, Apr 10, 2019 at 11:21:47AM -0700, Guenter Roeck wrote:
> Jean,
>
> On Wed, Apr 10, 2019 at 12:47:26PM +0200, Jean Delvare wrote:
> > Instead of duplicating the common code into the 2 (binary) drivers,
> > move the common code to a separate module. This is cleaner.
> >
> > Signed-off-by: Jean Delvare <jdelvare@xxxxxxx>
> > Cc: Eddie James <eajames@xxxxxxxxxxxxx>
> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
>
> what is the parent release for this patch ? I tried to apply it to mainline
> and to hwmon-next using git am, but both failed.
>
Never mind, found it - v5.0. Both patches applied to hwmon-next.
Thanks,
Guenter
> Thanks,
> Guenter
>
> > ---
> > Eddie, can you please give it a try and confirm it works?
> >
> > Note: I kept the module names as they were before, hence the extra
> > "*-objs :=" statements. They could be removed if we rename the source
> > files, but that's better done in git directly. I don't mind either way
> > personally.
> >
> > drivers/hwmon/occ/Kconfig | 3 +--
> > drivers/hwmon/occ/Makefile | 6 ++++--
> > drivers/hwmon/occ/common.c | 7 +++++++
> > drivers/hwmon/occ/sysfs.c | 2 ++
> > 4 files changed, 14 insertions(+), 4 deletions(-)
> >
> > --- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:30:05.579537638 +0200
> > +++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 11:31:20.843383376 +0200
> > @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
> > called occ-p9-hwmon.
> >
> > config SENSORS_OCC
> > - bool "POWER On-Chip Controller"
> > - depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
> > + tristate
> > --- linux-5.0.orig/drivers/hwmon/occ/Makefile 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/Makefile 2019-04-10 11:33:23.631765535 +0200
> > @@ -1,5 +1,7 @@
> > -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
> > -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
> > +occ-hwmon-common-objs := common.o sysfs.o
> > +occ-p8-hwmon-objs := p8_i2c.o
> > +occ-p9-hwmon-objs := p9_sbe.o
> >
> > +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
> > obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
> > obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
> > --- linux-5.0.orig/drivers/hwmon/occ/common.c 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/common.c 2019-04-10 11:44:53.035573580 +0200
> > @@ -1,11 +1,13 @@
> > // SPDX-License-Identifier: GPL-2.0
> >
> > #include <linux/device.h>
> > +#include <linux/export.h>
> > #include <linux/hwmon.h>
> > #include <linux/hwmon-sysfs.h>
> > #include <linux/jiffies.h>
> > #include <linux/kernel.h>
> > #include <linux/math64.h>
> > +#include <linux/module.h>
> > #include <linux/mutex.h>
> > #include <linux/sysfs.h>
> > #include <asm/unaligned.h>
> > @@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
> >
> > return rc;
> > }
> > +EXPORT_SYMBOL_GPL(occ_setup);
> > +
> > +MODULE_AUTHOR("Eddie James <eajames@xxxxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Common OCC hwmon code");
> > +MODULE_LICENSE("GPL");
> > --- linux-5.0.orig/drivers/hwmon/occ/sysfs.c 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/sysfs.c 2019-04-10 11:39:38.627003382 +0200
> > @@ -12,6 +12,7 @@
> >
> > #include <linux/bitops.h>
> > #include <linux/device.h>
> > +#include <linux/export.h>
> > #include <linux/hwmon-sysfs.h>
> > #include <linux/kernel.h>
> > #include <linux/sysfs.h>
> > @@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
> > {
> > sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
> > }
> > +EXPORT_SYMBOL_GPL(occ_shutdown);
> >
> >
> > --
> > Jean Delvare
> > SUSE L3 Support
