On 05/04/2019 17:05, Guenter Roeck wrote:
Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx> Reported-by: John Garry <john.garry@xxxxxxxxxx> Cc: John Garry <john.garry@xxxxxxxxxx>
Acked-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- v2: Fix subject, handle error in smsc47m1_restore() drivers/hwmon/smsc47m1.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 5d0c6eaae6f2..5f92eab24c62 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -73,16 +73,21 @@ superio_inb(int reg) /* logical device for fans is 0x0A */ #define superio_select() superio_outb(0x07, 0x0A) -static inline void +static inline int superio_enter(void) { + if (!request_muxed_region(REG, 2, DRVNAME))
I note that some other drivers give an error message here.
+ return -EBUSY; + outb(0x55, REG); + return 0; }
Maybe this can be factored out later into a common helper, as there does seem to be a bit duplication in kernel drivers (including gpio and wdt also)
But I'm not sure if it's worth it now. Thanks,
static inline void superio_exit(void) { outb(0xAA, REG); + release_region(REG, 2); } #define SUPERIO_REG_ACT 0x30 @@ -535,8 +540,12 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) { u8 val; unsigned short addr; + int err; + + err = superio_enter(); + if (err) + return err; - superio_enter(); val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); /* @@ -612,13 +621,14 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) { if ((sio_data->activate & 0x01) == 0) { - superio_enter(); - superio_select(); - - pr_info("Disabling device\n"); - superio_outb(SUPERIO_REG_ACT, sio_data->activate); - - superio_exit(); + if (!superio_enter()) { + superio_select(); + pr_info("Disabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate); + superio_exit(); + } else { + pr_warn("Failed to disable device\n"); + } } }