On Thu, Mar 28, 2019 at 01:09:36PM +0000, Charles Keepax wrote:
> Lochnagar is an evaluation and development board for Cirrus
> Logic Smart CODEC and Amp devices. It allows the connection of
> most Cirrus Logic devices on mini-cards, as well as allowing
> connection of various application processor systems to provide a
> full evaluation platform. This driver supports the board
> controller chip on the Lochnagar board.
>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Applied to hwmon-next.
Thanks,
Guenter
> ---
>
> No changes since v3.
>
> Thanks,
> Charles
>
> .../devicetree/bindings/hwmon/cirrus,lochnagar.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
> new file mode 100644
> index 0000000000000..ffb79ccf51ee3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
> @@ -0,0 +1,26 @@
> +Cirrus Logic Lochnagar Audio Development Board
> +
> +Lochnagar is an evaluation and development board for Cirrus Logic
> +Smart CODEC and Amp devices. It allows the connection of most Cirrus
> +Logic devices on mini-cards, as well as allowing connection of
> +various application processor systems to provide a full evaluation
> +platform. Audio system topology, clocking and power can all be
> +controlled through the Lochnagar, allowing the device under test
> +to be used in a variety of possible use cases.
> +
> +This binding document describes the binding for the hardware monitor
> +portion of the driver.
> +
> +This binding must be part of the Lochnagar MFD binding:
> + [4] ../mfd/cirrus,lochnagar.txt
> +
> +Required properties:
> +
> + - compatible : One of the following strings:
> + "cirrus,lochnagar2-hwmon"
> +
> +Example:
> +
> +lochnagar-hwmon {
> + compatible = "cirrus,lochnagar2-hwmon";
> +};
