[PATCH] hwmon: (pmbus) Add IEEE 754 half precision support to PMBus core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PMBus v1.3.1 adds IEEE 754 half precision as additional data format.
Add support for it.

Cc: Christian Grönke <C.Groenke@xxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
 drivers/hwmon/pmbus/pmbus.h      |   2 +-
 drivers/hwmon/pmbus/pmbus_core.c | 142 +++++++++++++++++++++++++++++++++++++--
 2 files changed, 139 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 1d24397d36ec..6477eb433790 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -374,7 +374,7 @@ enum pmbus_sensor_classes {
 
 #define PMBUS_PAGE_VIRTUAL	BIT(31)
 
-enum pmbus_data_format { linear = 0, direct, vid };
+enum pmbus_data_format { linear = 0, ieee754, direct, vid };
 enum vrm_version { vr11 = 0, vr12, vr13 };
 
 struct pmbus_driver_info {
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 2e2b5851139c..e1be5ebed57f 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -619,6 +619,66 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
 }
 
 /*
+ * Convert ieee754 sensor values to milli- or micro-units
+ * depending on sensor type.
+ *
+ * ieee754 data format:
+ *	bit 15:		sign
+ *	bit 10..14:	exponent
+ *	bit 0..9:	mantissa
+ * exponent=0:
+ *	v=(−1)^signbit * 2^(−14) * 0.significantbits
+ * exponent=1..30:
+ *	v=(−1)^signbit * 2^(exponent - 15) * 1.significantbits
+ * exponent=31:
+ *	v=NaN
+ *
+ * Add the number mantissa bits into the calculations for simplicity.
+ * To do that, add '10' to the exponent. By doing that, we can just add
+ * 0x400 to normal values and get the expected result.
+ */
+static long pmbus_reg2data_ieee754(struct pmbus_data *data,
+				   struct pmbus_sensor *sensor)
+{
+	int exponent;
+	bool sign;
+	long val;
+
+	/* only support half precision for now */
+	sign = sensor->data & 0x8000;
+	exponent = (sensor->data >> 10) & 0x1f;
+	val = sensor->data & 0x3ff;
+
+	if (exponent == 0) {			/* subnormal */
+		exponent = -(14 + 10);
+	} else if (exponent ==  0x1f) {		/* NaN, convert to min/max */
+		exponent = 0;
+		val = 65504;
+	} else {
+		exponent -= (15 + 10);		/* normal */
+		val |= 0x400;
+	}
+
+	/* scale result to milli-units for all sensors except fans */
+	if (sensor->class != PSC_FAN)
+		val = val * 1000L;
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER)
+		val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	if (sign)
+		val = -val;
+
+	return val;
+}
+
+/*
  * Convert linear sensor values to milli- or micro-units
  * depending on sensor type.
  */
@@ -740,6 +800,9 @@ static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
 	case vid:
 		val = pmbus_reg2data_vid(data, sensor);
 		break;
+	case ieee754:
+		val = pmbus_reg2data_ieee754(data, sensor);
+		break;
 	case linear:
 	default:
 		val = pmbus_reg2data_linear(data, sensor);
@@ -748,8 +811,72 @@ static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
 	return val;
 }
 
-#define MAX_MANTISSA	(1023 * 1000)
-#define MIN_MANTISSA	(511 * 1000)
+#define MAX_IEEE_MANTISSA	(0x7ff * 1000)
+#define MIN_IEEE_MANTISSA	(0x400 * 1000)
+
+static u16 pmbus_data2reg_ieee754(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor, long val)
+{
+	u16 exponent = (15 + 10);
+	long mantissa;
+	u16 sign = 0;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (val < 0) {
+		sign = 0x8000;
+		val = -val;
+	}
+
+	/* Power is in uW. Convert to mW before converting. */
+	if (sensor->class == PSC_POWER)
+		val = DIV_ROUND_CLOSEST(val, 1000L);
+
+	/*
+	 * For simplicity, convert fan data to milli-units
+	 * before calculating the exponent.
+	 */
+	if (sensor->class == PSC_FAN)
+		val = val * 1000;
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val > MAX_IEEE_MANTISSA && exponent < 30) {
+		exponent++;
+		val >>= 1;
+	}
+	/*
+	 * Increase small mantissa to generate valid 'normal'
+	 * number
+	 */
+	while (val < MIN_IEEE_MANTISSA && exponent > 1) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/*
+	 * Ensure that the resulting number is within range.
+	 * Valid range is 0x400..0x7ff, where bit 10 reflects
+	 * the implied high bit in normalized ieee754 numbers.
+	 * Set the range to 0x400..0x7ff to reflect this.
+	 * The upper bit is then removed by the mask against
+	 * 0x3ff in the final assignment.
+	 */
+	if (mantissa > 0x7ff)
+		mantissa = 0x7ff;
+	else if (mantissa < 0x400)
+		mantissa = 0x400;
+
+	/* Convert to sign, 5 bit exponent, 10 bit mantissa */
+	return sign | (mantissa & 0x3ff) | ((exponent << 10) & 0x7c00);
+}
+
+#define MAX_LIN_MANTISSA	(1023 * 1000)
+#define MIN_LIN_MANTISSA	(511 * 1000)
 
 static u16 pmbus_data2reg_linear(struct pmbus_data *data,
 				 struct pmbus_sensor *sensor, long val)
@@ -795,12 +922,12 @@ static u16 pmbus_data2reg_linear(struct pmbus_data *data,
 		val = val * 1000;
 
 	/* Reduce large mantissa until it fits into 10 bit */
-	while (val >= MAX_MANTISSA && exponent < 15) {
+	while (val >= MAX_LIN_MANTISSA && exponent < 15) {
 		exponent++;
 		val >>= 1;
 	}
 	/* Increase small mantissa to improve precision */
-	while (val < MIN_MANTISSA && exponent > -15) {
+	while (val < MIN_LIN_MANTISSA && exponent > -15) {
 		exponent--;
 		val <<= 1;
 	}
@@ -878,6 +1005,9 @@ static u16 pmbus_data2reg(struct pmbus_data *data,
 	case vid:
 		regval = pmbus_data2reg_vid(data, sensor, val);
 		break;
+	case ieee754:
+		regval = pmbus_data2reg_ieee754(data, sensor, val);
+		break;
 	case linear:
 	default:
 		regval = pmbus_data2reg_linear(data, sensor, val);
@@ -1967,6 +2097,10 @@ static int pmbus_identify_common(struct i2c_client *client,
 			if (data->info->format[PSC_VOLTAGE_OUT] != direct)
 				return -ENODEV;
 			break;
+		case 3:	/* ieee 754 half precision */
+			if (data->info->format[PSC_VOLTAGE_OUT] != ieee754)
+				return -ENODEV;
+			break;
 		default:
 			return -ENODEV;
 		}
-- 
2.7.4




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux