Re: [PATCH V3 3/6] thermal: Register hwmon in thermal_zone_of_sensor_register_param()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

On Mon, Feb 11, 2019 at 9:43 PM Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
> On 2/6/19 12:24 AM, Eduardo Valentin wrote:
> > On Mon, Jan 28, 2019 at 01:10:11PM +0100, Marek Vasut wrote:
> >> On 1/15/19 1:35 AM, Marek Vasut wrote:
> >>> On 12/22/18 3:19 AM, Marek Vasut wrote:
> >>>> On 12/18/2018 10:44 PM, Eduardo Valentin wrote:
> >>>>> On Mon, Dec 17, 2018 at 04:56:41PM +0100, marek.vasut@xxxxxxxxx wrote:
> >>>>>> From: Marek Vasut <marek.vasut@xxxxxxxxx>
> >>>>>>
> >>>>>> Register hwmon sysfs interface in thermal_zone_of_sensor_register_param()
> >>>>>> in case thermal_zone_params->no_hwmon is set to false. This behavior is
> >>>>>> the same as thermal_zone_device_register().
> >>>>>>
> >>>>>> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> >>>>>> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> >>>>>> Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
> >>>>>> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> >>>>>> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> >>>>>> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> >>>>>> To: linux-pm@xxxxxxxxxxxxxxx
> >>>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> >>>>>> ---
> >>>>>> V2: No change
> >>>>>> V3: - Work around the From line and SoB line checkpatch warning
> >>>>>>     - Reorder the SoB line at the end
> >>>>>> ---
> >>>>>>  drivers/thermal/of-thermal.c | 12 +++++++++++-
> >>>>>>  1 file changed, 11 insertions(+), 1 deletion(-)
> >>>>>>
> >>>>>> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
> >>>>>> index e1a303a5698c..5ccff7b678de 100644
> >>>>>> --- a/drivers/thermal/of-thermal.c
> >>>>>> +++ b/drivers/thermal/of-thermal.c
> >>>>>> @@ -15,6 +15,7 @@
> >>>>>>  #include <linux/string.h>
> >>>>>>
> >>>>>>  #include "thermal_core.h"
> >>>>>> +#include "thermal_hwmon.h"
> >>>>>>
> >>>>>>  /***   Private data structures to represent thermal device tree data ***/
> >>>>>>
> >>>>>> @@ -521,8 +522,15 @@ thermal_zone_of_sensor_register_params(struct device *dev, int sensor_id,
> >>>>>>                  if (sensor_specs.np == sensor_np && id == sensor_id) {
> >>>>>>                          tzd = thermal_zone_of_add_sensor(child, sensor_np,
> >>>>>>                                                           data, ops);
> >>>>>> -                        if (!IS_ERR(tzd))
> >>>>>> +                        if (!IS_ERR(tzd)) {
> >>>>>> +                                tzd->tzp = tzp;
> >>>>>
> >>>>> So, here you will overwrite what was done in of_parse_thermal_zones().
> >>>>> That means, after this point, property like sustainable power, slope and
> >>>>> offset are gone.
> >>>>
> >>>> Hmmmmm, that was rather inobvious, indeed.
> >>>>
> >>>> Do you have some suggestion how to pass in the no_hwmon = false then ?
> >>>> Since tzp->no_hwmon is set to true in of_parse_thermal_zones(), the
> >>>> three drivers (stm32, rcar, rcar_gen3) seem to hack around it. I'd like
> >>>> to clean that up.
> >>>
> >
> > Yeah, that is an issue.
> >
> >>> Bump ?
> >>
> >> Bump again, any suggestions ?
> >
> > Yeah, a couple of ideas have been proposed for this issue.
> >
> > First most tempting one is to have a DT property per thermal zone.
> > Making it linux specific, something prefixed by linux,<property>. I
> > recall Amit Kutcheria trying something similar to this, but dont
> > remember where that went. Frankly, this is a Linux thing, I am not
> > convinced DT is really the right place to fix this.
>
> DT is not the right place for this, DT describes hardware and this is
> policy, so it shouldn't be in DT.

Indeed.

> > Another hack that could be written is a module parameter for of-thermal
> > that would reflect the no_hwmon value, globally. The down side here is
> > you have to make sure all drivers match that no_hwmon value, right?
>
> Indeed, it should be the driver which decides whether or not to register
> a HWMON interface for the thermal zone.
>
> I guess for now, I'll just discard this entire series and hack the data
> structure like other drivers do, since I don't see any reasonable solution.

Pardon my ignorance, but when would a thermal driver (not) want to register
a hwmon interface for the thermal zone?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux