Hi, This patch adds support for the PWM frequencies from 22.5 to 30 kHz available on the LM96000. It looks like this chip has been supported for a long time, but wasn't mentioned in the docs (which I have updated). Also, it has been using the generic 'lm85' prefix, which I have not changed to avoid breaking userspace or device tree files. AFAICT, lm85_detect() will only return 'lm85' for LM96000 chips, so it doesn't look like you can get a bare 'lm85' prefix with any other chips. I stumbled on to a 10 year old thread discussing a patch which looks like an early attempt to add support for this chip, which may be of interest: https://lm-sensors.lm-sensors.narkive.com/1SIwaMDT/patch-hwmon-lm96000-support Thanks for reviewing, Jeremy Jeremy Gebben (3): hwmon: (lm85) remove freq_map size hardcodes hwmon: (lm85) Document the LM96000 as supported hwmon: (lm85) add support for LM96000 high frequencies Documentation/hwmon/lm85 | 9 ++++++++- drivers/hwmon/lm85.c | 32 ++++++++++++++++++++++---------- 2 files changed, 30 insertions(+), 11 deletions(-) -- 2.17.1
