On Sat, Dec 08, 2018 at 02:33:28PM +0800, Pu Wen wrote:
> Add support for Hygon Dhyana family 18h processor for k10temp to get the
> temperature. As Hygon Dhyana shares the same function interface with AMD
> family 17h, so add Hygon PCI Vendor ID and reuse the code path of AMD.
>
> Signed-off-by: Pu Wen <puwen@xxxxxxxx>
> ---
> drivers/hwmon/k10temp.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index 2cef0c3..e24ba10 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -330,7 +330,7 @@ static int k10temp_probe(struct pci_dev *pdev,
> (boot_cpu_data.x86_model & 0xf0) == 0x70)) {
> data->read_htcreg = read_htcreg_nb_f15;
> data->read_tempreg = read_tempreg_nb_f15;
> - } else if (boot_cpu_data.x86 == 0x17) {
> + } else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
> data->temp_adjust_mask = 0x80000;
> data->read_tempreg = read_tempreg_nb_f17;
> data->show_tdie = true;
> @@ -367,6 +367,7 @@ static const struct pci_device_id k10temp_id_table[] = {
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
> + { PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
> {}
> };
> MODULE_DEVICE_TABLE(pci, k10temp_id_table);
> --
Acked-by: Borislav Petkov <bp@xxxxxxx>
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
