Conversion was done done using the coccinelle script at https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/ina2xx.c | 36 ++++++++++++++---------------------- 1 file changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 07ee19573b3f..290379c49be9 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -290,7 +290,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, return val; } -static ssize_t ina2xx_show_value(struct device *dev, +static ssize_t ina2xx_value_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -329,16 +329,15 @@ static int ina2xx_set_shunt(struct ina2xx_data *data, long val) return 0; } -static ssize_t ina2xx_show_shunt(struct device *dev, - struct device_attribute *da, - char *buf) +static ssize_t ina2xx_shunt_show(struct device *dev, + struct device_attribute *da, char *buf) { struct ina2xx_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%li\n", data->rshunt); } -static ssize_t ina2xx_store_shunt(struct device *dev, +static ssize_t ina2xx_shunt_store(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { @@ -356,9 +355,9 @@ static ssize_t ina2xx_store_shunt(struct device *dev, return count; } -static ssize_t ina226_set_interval(struct device *dev, - struct device_attribute *da, - const char *buf, size_t count) +static ssize_t ina226_interval_store(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) { struct ina2xx_data *data = dev_get_drvdata(dev); unsigned long val; @@ -380,7 +379,7 @@ static ssize_t ina226_set_interval(struct device *dev, return count; } -static ssize_t ina226_show_interval(struct device *dev, +static ssize_t ina226_interval_show(struct device *dev, struct device_attribute *da, char *buf) { struct ina2xx_data *data = dev_get_drvdata(dev); @@ -395,29 +394,22 @@ static ssize_t ina226_show_interval(struct device *dev, } /* shunt voltage */ -static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL, - INA2XX_SHUNT_VOLTAGE); +static SENSOR_DEVICE_ATTR_RO(in0_input, ina2xx_value, INA2XX_SHUNT_VOLTAGE); /* bus voltage */ -static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina2xx_show_value, NULL, - INA2XX_BUS_VOLTAGE); +static SENSOR_DEVICE_ATTR_RO(in1_input, ina2xx_value, INA2XX_BUS_VOLTAGE); /* calculated current */ -static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL, - INA2XX_CURRENT); +static SENSOR_DEVICE_ATTR_RO(curr1_input, ina2xx_value, INA2XX_CURRENT); /* calculated power */ -static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL, - INA2XX_POWER); +static SENSOR_DEVICE_ATTR_RO(power1_input, ina2xx_value, INA2XX_POWER); /* shunt resistance */ -static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR, - ina2xx_show_shunt, ina2xx_store_shunt, - INA2XX_CALIBRATION); +static SENSOR_DEVICE_ATTR_RW(shunt_resistor, ina2xx_shunt, INA2XX_CALIBRATION); /* update interval (ina226 only) */ -static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, - ina226_show_interval, ina226_set_interval, 0); +static SENSOR_DEVICE_ATTR_RW(update_interval, ina226_interval, 0); /* pointers to created device attributes */ static struct attribute *ina2xx_attrs[] = { -- 2.7.4
