In case an under-voltage happens before probing the driver wont write the critical warning into the kernel log. So don't init of last_throttled during probe and fix this issue. Fixes: 74d1e007915f ("hwmon: Add support for RPi voltage sensor") Reported-by: "Noralf Trønnes" <noralf@xxxxxxxxxxx> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- drivers/hwmon/raspberrypi-hwmon.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c index be5ba46..0d04572 100644 --- a/drivers/hwmon/raspberrypi-hwmon.c +++ b/drivers/hwmon/raspberrypi-hwmon.c @@ -115,7 +115,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rpi_hwmon_data *data; - int ret; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -124,11 +123,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) /* Parent driver assure that firmware is correct */ data->fw = dev_get_drvdata(dev->parent); - /* Init throttled */ - ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED, - &data->last_throttled, - sizeof(data->last_throttled)); - data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt", data, &rpi_chip_info, -- 2.7.4