'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 15 ---------------
1 file changed, 15 deletions(-)
Index: b/drivers/hwmon/pmbus/Kconfig
===================================================================
--- a/drivers/hwmon/pmbus/Kconfig 2018-10-09 15:58:39.067122941 +0200
+++ b/drivers/hwmon/pmbus/Kconfig 2018-10-10 16:31:57.671888538 +0200
@@ -5,7 +5,6 @@
menuconfig PMBUS
tristate "PMBus support"
depends on I2C
- default n
help
Say yes here if you want to enable PMBus support.
@@ -28,7 +27,6 @@ config SENSORS_PMBUS
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
@@ -49,7 +47,6 @@ config SENSORS_IBM_CFFPS
config SENSORS_IR35221
tristate "Infineon IR35221"
- default n
help
If you say yes here you get hardware monitoring support for the
Infineon IR35221 controller.
@@ -59,7 +56,6 @@ config SENSORS_IR35221
config SENSORS_LM25066
tristate "National Semiconductor LM25066 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for National
Semiconductor LM25056, LM25066, LM5064, and LM5066.
@@ -69,7 +65,6 @@ config SENSORS_LM25066
config SENSORS_LTC2978
tristate "Linear Technologies LTC2978 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
@@ -88,7 +83,6 @@ config SENSORS_LTC2978_REGULATOR
config SENSORS_LTC3815
tristate "Linear Technologies LTC3815"
- default n
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC3815.
@@ -98,7 +92,6 @@ config SENSORS_LTC3815
config SENSORS_MAX16064
tristate "Maxim MAX16064"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX16064.
@@ -108,7 +101,6 @@ config SENSORS_MAX16064
config SENSORS_MAX20751
tristate "Maxim MAX20751"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX20751.
@@ -118,7 +110,6 @@ config SENSORS_MAX20751
config SENSORS_MAX31785
tristate "Maxim MAX31785 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX31785.
@@ -128,7 +119,6 @@ config SENSORS_MAX31785
config SENSORS_MAX34440
tristate "Maxim MAX34440 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
@@ -138,7 +128,6 @@ config SENSORS_MAX34440
config SENSORS_MAX8688
tristate "Maxim MAX8688"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX8688.
@@ -148,7 +137,6 @@ config SENSORS_MAX8688
config SENSORS_TPS40422
tristate "TI TPS40422"
- default n
help
If you say yes here you get hardware monitoring support for TI
TPS40422.
@@ -167,7 +155,6 @@ config SENSORS_TPS53679
config SENSORS_UCD9000
tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
- default n
help
If you say yes here you get hardware monitoring support for TI
UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
@@ -178,7 +165,6 @@ config SENSORS_UCD9000
config SENSORS_UCD9200
tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
- default n
help
If you say yes here you get hardware monitoring support for TI
UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
@@ -189,7 +175,6 @@ config SENSORS_UCD9200
config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Intersil
ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
