Signed-off-by: Wojciech Slenska <wojciech.slenska@xxxxxxxxx> --- Documentation/devicetree/bindings/hwmon/sht3x.txt | 16 +++++++++++++ drivers/hwmon/sht3x.c | 28 ++++++++++++++++++++--- 2 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/sht3x.txt diff --git a/Documentation/devicetree/bindings/hwmon/sht3x.txt b/Documentation/devicetree/bindings/hwmon/sht3x.txt new file mode 100644 index 0000000..80b117e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sht3x.txt @@ -0,0 +1,16 @@ +Sensirion SHT3x Humidity and Temperature Sensor + +Required node properties: +- compatible: "sensirion,sht3x" or "sensirion,sts3x" +- reg: I2C bus address of the device + +Optional properties: +- blocking-io: enable blocking mode on i2c +- no-high-precision: disable high accuracy + +Example sht3x node: + +sensor { + compatible = "sensirion,sht3x"; + reg = <0x4a>; +} diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c index 370b57d..1f8b7e7 100644 --- a/drivers/hwmon/sht3x.c +++ b/drivers/hwmon/sht3x.c @@ -31,6 +31,7 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/platform_data/sht3x.h> +#include <linux/of.h> /* commands (high precision mode) */ static const unsigned char sht3x_cmd_measure_blocking_hpm[] = { 0x2c, 0x06 }; @@ -699,6 +700,7 @@ static int sht3x_probe(struct i2c_client *client, struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; const struct attribute_group **attribute_groups; + struct device_node *np = client->dev.of_node; /* * we require full i2c support since the sht3x uses multi-byte read and @@ -724,8 +726,16 @@ static int sht3x_probe(struct i2c_client *client, data->client = client; crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL); - if (client->dev.platform_data) - data->setup = *(struct sht3x_platform_data *)dev->platform_data; + if (np) { + if (of_find_property(np, "blocking-io", NULL)) + data->setup.blocking_io = true; + if (of_find_property(np, "no-high-precision", NULL)) + data->setup.high_precision = false; + } else { + if (client->dev.platform_data) + data->setup = *(struct sht3x_platform_data *) + dev->platform_data; + } sht3x_select_command(data); @@ -768,8 +778,20 @@ static const struct i2c_device_id sht3x_ids[] = { MODULE_DEVICE_TABLE(i2c, sht3x_ids); +#ifdef CONFIG_OF +static const struct of_device_id sht3x_dt_match[] = { + { .compatible = "sensirion,sht3x" }, + { .compatible = "sensirion,sts3x" }, + {} +}; +MODULE_DEVICE_TABLE(of, sht3x_dt_match); +#endif + static struct i2c_driver sht3x_i2c_driver = { - .driver.name = "sht3x", + .driver = { + .name = "sht3x", + .of_match_table = of_match_ptr(sht3x_dt_match), + }, .probe = sht3x_probe, .id_table = sht3x_ids, }; -- 2.7.4