The function has the measure update part and limits and settings part.
And those parts can be split so split them for a maintainability.
Signed-off-by: Tokunori Ikegami <ikegami@xxxxxxxxxxxxxxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Cc: linux-hwmon@xxxxxxxxxxxxxxx
---
Changes since v2:
- Move to update the limits from the probe function.
Changes since v1:
- Change to update the limits only once.
drivers/hwmon/adt7475.c | 210 +++++++++++++++++++++++++-----------------------
1 file changed, 109 insertions(+), 101 deletions(-)
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 9ef84998c7f3..d6fe4ddd9927 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -194,7 +194,6 @@ struct adt7475_data {
struct mutex lock;
unsigned long measure_updated;
- unsigned long limits_updated;
char valid;
u8 config4;
@@ -1385,6 +1384,65 @@ static void adt7475_remove_files(struct i2c_client *client,
sysfs_remove_group(&client->dev.kobj, &vid_attr_group);
}
+static void adt7475_update_limits(struct i2c_client *client)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ int i;
+
+ data->config4 = adt7475_read(REG_CONFIG4);
+ data->config5 = adt7475_read(REG_CONFIG5);
+
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
+ /* Adjust values so they match the input precision */
+ data->voltage[MIN][i] =
+ adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
+ data->voltage[MAX][i] =
+ adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
+ }
+
+ if (data->has_voltage & (1 << 5)) {
+ data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
+ data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
+ }
+
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+ /* Adjust values so they match the input precision */
+ data->temp[MIN][i] =
+ adt7475_read(TEMP_MIN_REG(i)) << 2;
+ data->temp[MAX][i] =
+ adt7475_read(TEMP_MAX_REG(i)) << 2;
+ data->temp[AUTOMIN][i] =
+ adt7475_read(TEMP_TMIN_REG(i)) << 2;
+ data->temp[THERM][i] =
+ adt7475_read(TEMP_THERM_REG(i)) << 2;
+ data->temp[OFFSET][i] =
+ adt7475_read(TEMP_OFFSET_REG(i));
+ }
+ adt7475_read_hystersis(client);
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
+ data->tach[MIN][i] =
+ adt7475_read_word(client, TACH_MIN_REG(i));
+ }
+
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
+ data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
+ data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
+ /* Set the channel and control information */
+ adt7475_read_pwm(client, i);
+ }
+
+ data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
+ data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
+ data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+}
+
static int adt7475_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1562,6 +1620,9 @@ static int adt7475_probe(struct i2c_client *client,
(data->bypass_attn & (1 << 3)) ? " in3" : "",
(data->bypass_attn & (1 << 4)) ? " in4" : "");
+ /* Limits and settings, should never change update more than once */
+ adt7475_update_limits(client);
+
return 0;
eremove:
@@ -1658,121 +1719,68 @@ static void adt7475_read_pwm(struct i2c_client *client, int index)
}
}
-static struct adt7475_data *adt7475_update_device(struct device *dev)
+static void adt7475_update_measure(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7475_data *data = i2c_get_clientdata(client);
u16 ext;
int i;
- mutex_lock(&data->lock);
-
- /* Measurement values update every 2 seconds */
- if (time_after(jiffies, data->measure_updated + HZ * 2) ||
- !data->valid) {
- data->alarms = adt7475_read(REG_STATUS2) << 8;
- data->alarms |= adt7475_read(REG_STATUS1);
-
- ext = (adt7475_read(REG_EXTEND2) << 8) |
- adt7475_read(REG_EXTEND1);
- for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
- if (!(data->has_voltage & (1 << i)))
- continue;
- data->voltage[INPUT][i] =
- (adt7475_read(VOLTAGE_REG(i)) << 2) |
- ((ext >> (i * 2)) & 3);
- }
-
- for (i = 0; i < ADT7475_TEMP_COUNT; i++)
- data->temp[INPUT][i] =
- (adt7475_read(TEMP_REG(i)) << 2) |
- ((ext >> ((i + 5) * 2)) & 3);
-
- if (data->has_voltage & (1 << 5)) {
- data->alarms |= adt7475_read(REG_STATUS4) << 24;
- ext = adt7475_read(REG_EXTEND3);
- data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
- ((ext >> 4) & 3);
- }
-
- for (i = 0; i < ADT7475_TACH_COUNT; i++) {
- if (i == 3 && !data->has_fan4)
- continue;
- data->tach[INPUT][i] =
- adt7475_read_word(client, TACH_REG(i));
- }
-
- /* Updated by hw when in auto mode */
- for (i = 0; i < ADT7475_PWM_COUNT; i++) {
- if (i == 1 && !data->has_pwm2)
- continue;
- data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
- }
+ data->alarms = adt7475_read(REG_STATUS2) << 8;
+ data->alarms |= adt7475_read(REG_STATUS1);
+
+ ext = (adt7475_read(REG_EXTEND2) << 8) |
+ adt7475_read(REG_EXTEND1);
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
+ data->voltage[INPUT][i] =
+ (adt7475_read(VOLTAGE_REG(i)) << 2) |
+ ((ext >> (i * 2)) & 3);
+ }
- if (data->has_vid)
- data->vid = adt7475_read(REG_VID) & 0x3f;
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++)
+ data->temp[INPUT][i] =
+ (adt7475_read(TEMP_REG(i)) << 2) |
+ ((ext >> ((i + 5) * 2)) & 3);
- data->measure_updated = jiffies;
+ if (data->has_voltage & (1 << 5)) {
+ data->alarms |= adt7475_read(REG_STATUS4) << 24;
+ ext = adt7475_read(REG_EXTEND3);
+ data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
+ ((ext >> 4) & 3);
}
- /* Limits and settings, should never change update every 60 seconds */
- if (time_after(jiffies, data->limits_updated + HZ * 60) ||
- !data->valid) {
- data->config4 = adt7475_read(REG_CONFIG4);
- data->config5 = adt7475_read(REG_CONFIG5);
-
- for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
- if (!(data->has_voltage & (1 << i)))
- continue;
- /* Adjust values so they match the input precision */
- data->voltage[MIN][i] =
- adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
- data->voltage[MAX][i] =
- adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
- }
-
- if (data->has_voltage & (1 << 5)) {
- data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
- data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
- }
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
+ data->tach[INPUT][i] =
+ adt7475_read_word(client, TACH_REG(i));
+ }
- for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
- /* Adjust values so they match the input precision */
- data->temp[MIN][i] =
- adt7475_read(TEMP_MIN_REG(i)) << 2;
- data->temp[MAX][i] =
- adt7475_read(TEMP_MAX_REG(i)) << 2;
- data->temp[AUTOMIN][i] =
- adt7475_read(TEMP_TMIN_REG(i)) << 2;
- data->temp[THERM][i] =
- adt7475_read(TEMP_THERM_REG(i)) << 2;
- data->temp[OFFSET][i] =
- adt7475_read(TEMP_OFFSET_REG(i));
- }
- adt7475_read_hystersis(client);
+ /* Updated by hw when in auto mode */
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
+ data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+ }
- for (i = 0; i < ADT7475_TACH_COUNT; i++) {
- if (i == 3 && !data->has_fan4)
- continue;
- data->tach[MIN][i] =
- adt7475_read_word(client, TACH_MIN_REG(i));
- }
+ if (data->has_vid)
+ data->vid = adt7475_read(REG_VID) & 0x3f;
+}
- for (i = 0; i < ADT7475_PWM_COUNT; i++) {
- if (i == 1 && !data->has_pwm2)
- continue;
- data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
- data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
- /* Set the channel and control information */
- adt7475_read_pwm(client, i);
- }
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
- data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
- data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
- data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+ mutex_lock(&data->lock);
- data->limits_updated = jiffies;
- data->valid = 1;
+ /* Measurement values update every 2 seconds */
+ if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+ !data->valid) {
+ adt7475_update_measure(dev);
+ data->measure_updated = jiffies;
}
mutex_unlock(&data->lock);
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
