Signed-off-by: Shilpasri G Bhat <shilpa.bhat@xxxxxxxxxxxxxxxxxx> --- Documentation/hwmon/sysfs-interface | 62 +++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index fc337c3..f865dd7 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -171,6 +171,15 @@ in[0-*]_label Suggested voltage channel label. user-space. RO +in[0-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + cpu[0-*]_vid CPU core reference voltage. Unit: millivolt RO @@ -236,6 +245,15 @@ fan[1-*]_label Suggested fan channel label. In all other cases, the label is provided by user-space. RO +fan[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with fans. @@ -409,6 +427,15 @@ temp_reset_history Reset temp_lowest and temp_highest for all sensors WO +temp[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Some chips measure temperature using external thermistors and an ADC, and report the temperature measurement as a voltage. Converting this voltage back to a temperature (or the other way around for limits) requires @@ -468,6 +495,15 @@ curr_reset_history Reset currX_lowest and currX_highest for all sensors WO +curr[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with currents. ********* @@ -566,6 +602,15 @@ power[1-*]_crit Critical maximum power. Unit: microWatt RW +power[1-*]_enable Enable or disable the sensors. + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with power readings. ********** @@ -576,6 +621,14 @@ energy[1-*]_input Cumulative energy use Unit: microJoule RO +energy[1-*]_enable Enable or disable the sensors. + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW ************ * Humidity * @@ -586,6 +639,15 @@ humidity[1-*]_input Humidity RO +humidity[1-*]_enable Enable or disable the sensors + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW + ********** * Alarms * ********** -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
