> -----Original Message----- > From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx] > Sent: Tuesday, July 03, 2018 7:16 PM > To: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > Cc: linux-hwmon@xxxxxxxxxxxxxxx; jiri@xxxxxxxxxxx; Michael Shych > <michaelsh@xxxxxxxxxxxx> > Subject: Re: [v5,1/1] hwmon: (mlxreg-fan) Add support for Mellanox FAN driver > > On Tue, Jul 03, 2018 at 07:00:09AM +0000, Vadim Pasternak wrote: > > Driver obtains PWM and tachometers registers location according to the > > system configuration and creates FAN/PWM hwmon objects and a cooling > > device. PWM and tachometers are controlled through the on-board > > programmable device, which exports its register map. This device could > > be attached to any bus type, for which register mapping is supported. > > Single instance is created with one PWM control, up to 12 tachometers > > and one cooling device. It could be as many instances as programmable > > device supports. > > > > Currently driver will be activated from the Mellanox platform driver: > > drivers/platform/x86/mlx-platform.c. > > For the future ARM based systems it could be activated from the ARM > > platform module. > > > > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > > Applied to hwmon-next. Thank you very much, Vadim. > > Thanks, > Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
