[PATCH v2 2/8] [PATCH 2/8] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds a dt-bindings document of PECI adapter driver for Aspeed
AST24xx/25xx SoCs.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/peci/peci-aspeed.txt       | 73 ++++++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt

diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
new file mode 100644
index 000000000000..8a86f346d550
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
@@ -0,0 +1,73 @@
+Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.
+
+Required properties:
+- compatible
+	"aspeed,ast2400-peci" or "aspeed,ast2500-peci"
+	- aspeed,ast2400-peci: Aspeed AST2400 family PECI controller
+	- aspeed,ast2500-peci: Aspeed AST2500 family PECI controller
+
+- reg
+	Should contain PECI registers location and length.
+
+- #address-cells
+	Should be <1>.
+
+- #size-cells
+	Should be <0>.
+
+- interrupts
+	Should contain PECI interrupt.
+
+- clocks
+	Should contain clock source for PECI hardware module. Should reference
+	clkin clock.
+
+- clock_frequency
+	Should contain the operation frequency of PECI hardware module.
+	187500 ~ 24000000
+
+Optional properties:
+- msg-timing-nego
+	Message timing negotiation period. This value will determine the period
+	of message timing negotiation to be issued by PECI controller. The unit
+	of the programmed value is four times of PECI clock period.
+	0 ~ 255 (default: 1)
+
+- addr-timing-nego
+	Address timing negotiation period. This value will determine the period
+	of address timing negotiation to be issued by PECI controller. The unit
+	of the programmed value is four times of PECI clock period.
+	0 ~ 255 (default: 1)
+
+- rd-sampling-point
+	Read sampling point selection. The whole period of a bit time will be
+	divided into 16 time frames. This value will determine which time frame
+	this controller will sample PECI signal for data read back. Usually in
+	the middle of a bit time is the best.
+	0 ~ 15 (default: 8)
+
+- cmd_timeout_ms
+	Command timeout in units of ms.
+	1 ~ 60000 (default: 1000)
+
+Example:
+	peci: peci@1e78b000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1e78b000 0x60>;
+
+		peci0: peci-bus@0 {
+			compatible = "aspeed,ast2500-peci";
+			reg = <0x0 0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <15>;
+			clocks = <&clk_clkin>;
+			clock-frequency = <24000000>;
+			msg-timing-nego = <1>;
+			addr-timing-nego = <1>;
+			rd-sampling-point = <8>;
+			cmd-timeout-ms = <1000>;
+		};
+	};
\ No newline at end of file
-- 
2.16.1

--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux