On Mon, Jan 08, 2018 at 03:10:09PM -0600, Eddie James wrote: > This power supply device regularly fails to read VOUT_MODE due to the > CML bit going high. This results in an incorrect exponent used for the > voltage data, and therefore the power supply reports incorrect voltage. > Work around this by setting the pmbus flag to skip the CML check. > > Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxxxxxxx> Applied. Thanks, Guenter > --- > drivers/hwmon/pmbus/ibm-cffps.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c > index de254747..2d6f4f4 100644 > --- a/drivers/hwmon/pmbus/ibm-cffps.c > +++ b/drivers/hwmon/pmbus/ibm-cffps.c > @@ -15,6 +15,7 @@ > #include <linux/jiffies.h> > #include <linux/module.h> > #include <linux/mutex.h> > +#include <linux/pmbus.h> > > #include "pmbus.h" > > @@ -268,6 +269,10 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page, > .read_word_data = ibm_cffps_read_word_data, > }; > > +static struct pmbus_platform_data ibm_cffps_pdata = { > + .flags = PMBUS_SKIP_STATUS_CHECK, > +}; > + > static int ibm_cffps_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -276,6 +281,7 @@ static int ibm_cffps_probe(struct i2c_client *client, > struct dentry *ibm_cffps_dir; > struct ibm_cffps *psu; > > + client->dev.platform_data = &ibm_cffps_pdata; > rc = pmbus_do_probe(client, id, &ibm_cffps_info); > if (rc) > return rc; > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html