Hei hei,
I have v4.15-rc2 vanilla running on the original Raspberry Pi 1B aka
bcm2835 (not rev2, not the 1B+ or plus), compiled with ptxdist /
DistroKit, using bcm2835-rpi-b.dts from arch/arm/boot/dts as device
tree file. I try to get temperature values from the SoC with
lm-sensors (for using it in some other project). After reading an
issue report on the lm-sensors github project [1] I checked my kernel
config. The following is set:
CONFIG_HWMON=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL=y
CONFIG_THERMAL_OF=y
CONFIG_BCM2835_THERMAL=y
There's one thermal zone in sysfs and I get some temperature which I
suppose is the temp of the SoC in m°C:
root@DistroKit:~ cat /sys/class/thermal/thermal_zone0/temp
42236
However, there's nothing below /sys/class/hwmon and I'm wondering why.
There's a thermal zone named 'cpu-thermal' defined and active in DT.
I tried to read some driver code and as far as I understood
thermal_add_hwmon_sysfs() must be called somewhere to get entries for
hwmon in sysfs, and this is done in thermal_zone_device_register(), so
probably a thermal zone must be present somehow, but it seems to be,
at least I can read temp values from it.
What piece am I missing? Is it some kind of configuration I did wrong?
Greets
Alex
[1] https://github.com/groeck/lm-sensors/issues/30
--
»With the first link, the chain is forged. The first speech censured,
the first thought forbidden, the first freedom denied, chains us all
irrevocably.« (Jean-Luc Picard, quoting Judge Aaron Satie)
*** GnuPG-FP: C28E E6B9 0263 95CF 8FAF 08FA 34AD CD00 7221 5CC6 ***
Attachment:
signature.asc
Description: PGP signature
