Hi Fabio, On Sat, 25 Nov 2017 12:04:19 -0200 Fabio Estevam <festevam@xxxxxxxxx> wrote: > On Sat, Nov 25, 2017 at 7:41 AM, Davide Hug <d@xxxxxxxxxx> wrote: > > >> What is the gpio driver you are using that shows the error? > > > > The following two drivers: > > > > - gpio/gpio-omap (on the beaglebone black) > > - pinctrl/bcm/pinctrl-bcm2835 (on the raspberry pi 2). > > > > Where pinctrl-bcm2835 has to include commit > > 85ae9e512f437cd09bf61564bdba29ab88bab3e3 where the driver was converted to > > using the GPIOLIB_IRQCHIP helper library. > > Maybe you could start a new thread in the linux-gpio mailing list to > discuss this problem on these two drivers. There is a thread in the linux-gpio mailing list on this topic[1]. There it was suggested to me to fix the sht15 driver, so I started the thread here. But in the meantime in the linux-gpio thread it was suggested to make gpiolib support what the sht15 driver does. So my plan would be to see if that works out and otherwise propose a patch for the sht15 driver here on linux-hwmon. It was proposed to use a simple polling loop and avoid using irq and this works really well for me. Regards, Davide Hug [1]: http://www.spinics.net/lists/linux-gpio/msg24019.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html