On Thu, Aug 10, 2017 at 04:57:49PM -0500, eajames@xxxxxxxxxxxxxxxxxx wrote:
> From: "Edward A. James" <eajames@xxxxxxxxxx>
>
> Add PB_STATUS_INPUT as the generic alarm bit for iin and pin. We also
> need to redo the status register checking before setting up the boolean
> attribute, since it won't necessarily check STATUS_WORD if the device
> doesn't support it, which we need for this bit.
>
> Signed-off-by: Edward A. James <eajames@xxxxxxxxxx>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 277d170..ef135d8 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -114,6 +114,7 @@ struct pmbus_data {
> */
> u16 status[PB_NUM_STATUS_REG];
>
> + bool has_status_word; /* device uses STATUS_WORD register */
> int (*read_status)(struct i2c_client *client, int page);
>
> u8 currpage;
> @@ -1045,6 +1046,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
> const struct pmbus_sensor_attr *attr)
> {
> struct pmbus_sensor *base;
> + bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */
> int ret;
>
> if (attr->label) {
> @@ -1065,9 +1067,11 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
> /*
> * Add generic alarm attribute only if there are no individual
> * alarm attributes, if there is a global alarm bit, and if
> - * the generic status register for this page is accessible.
> + * the generic status register (word or byte, depending on
> + * which global bit is set) for this page is accessible.
> */
> if (!ret && attr->gbit &&
> + (!upper || (upper && data->has_status_word)) &&
> pmbus_check_status_register(client, page)) {
> ret = pmbus_add_boolean(data, name, "alarm", index,
> NULL, NULL,
> @@ -1324,6 +1328,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
> .func = PMBUS_HAVE_IIN,
> .sfunc = PMBUS_HAVE_STATUS_INPUT,
> .sbase = PB_STATUS_INPUT_BASE,
> + .gbit = PB_STATUS_INPUT,
> .limit = iin_limit_attrs,
> .nlimit = ARRAY_SIZE(iin_limit_attrs),
> }, {
> @@ -1408,6 +1413,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
> .func = PMBUS_HAVE_PIN,
> .sfunc = PMBUS_HAVE_STATUS_INPUT,
> .sbase = PB_STATUS_INPUT_BASE,
> + .gbit = PB_STATUS_INPUT,
> .limit = pin_limit_attrs,
> .nlimit = ARRAY_SIZE(pin_limit_attrs),
> }, {
> @@ -1775,6 +1781,8 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
> dev_err(dev, "PMBus status register not found\n");
> return -ENODEV;
> }
> + } else {
> + data->has_status_word = true;
> }
>
> /* Enable PEC if the controller supports it */
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
