On Thu, Jun 29, 2017 at 12:45 PM, Mike Looijmans <mike.looijmans@xxxxxxxx> wrote: > The LTC2741 and LTC2473 are single voltage monitoring chips. The LTC2473 > is similar to the LTC2471 but outputs a signed differential value. > > Datasheet: > http://cds.linear.com/docs/en/datasheet/24713fb.pdf > > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > --- > drivers/hwmon/Kconfig | 10 ++++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/ltc2471.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 138 insertions(+) > create mode 100644 drivers/hwmon/ltc2471.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index fbde226..c9a2a87 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -673,6 +673,16 @@ config SENSORS_LINEAGE > This driver can also be built as a module. If so, the module > will be called lineage-pem. > > +config SENSORS_LTC2471 > + tristate "Linear Technology LTC2471 and LTC2473" > + depends on I2C > + help > + If you say yes here you get support for Linear Technology LTC2471 > + and LTC2473 voltage monitors. > + > + This driver can also be built as a module. If so, the module will > + be called ltc2471. > + > config SENSORS_LTC2945 > tristate "Linear Technology LTC2945" > depends on I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 58cc3ac..6f60fe7 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -99,6 +99,7 @@ obj-$(CONFIG_SENSORS_LM93) += lm93.o > obj-$(CONFIG_SENSORS_LM95234) += lm95234.o > obj-$(CONFIG_SENSORS_LM95241) += lm95241.o > obj-$(CONFIG_SENSORS_LM95245) += lm95245.o > +obj-$(CONFIG_SENSORS_LTC2471) += ltc2471.o > obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o > obj-$(CONFIG_SENSORS_LTC2990) += ltc2990.o > obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o > diff --git a/drivers/hwmon/ltc2471.c b/drivers/hwmon/ltc2471.c > new file mode 100644 > index 0000000..17eaad8 > --- /dev/null > +++ b/drivers/hwmon/ltc2471.c > @@ -0,0 +1,127 @@ > +/* > + * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors > + * The LTC2473 is identical to the 2471, but reports a differential signal. > + * > + * Copyright (C) 2017 Topic Embedded Products > + * Author: Mike Looijmans <mike.looijmans@xxxxxxxx> > + * > + * License: GPLv2 > + */ > + > +#include <linux/err.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > + > +enum chips { > + ltc2471, > + ltc2473 > +}; > + > +struct ltc2471_data { > + struct i2c_client *i2c; > + bool differential; > +}; I haven't checked if there are similar drivers, but how about ltc247x_data? It's a bit odd to tie all naming in this driver to one chip and then support another one as well. > + > +/* Reference voltage is 1.25V */ > +#define LTC2471_VREF 1250 > + > +/* Read two bytes from the I2C bus to obtain the ADC result */ > +static int ltc2471_get_value(struct i2c_client *i2c) > +{ > + int ret; > + __be16 buf; > + > + ret = i2c_master_recv(i2c, (char *)&buf, 2); > + if (ret < 0) > + return ret; > + if (ret != 2) > + return -EIO; > + > + /* MSB first */ > + return be16_to_cpu(buf); > +} > + > +static ssize_t ltc2471_show_value(struct device *dev, > + struct device_attribute *da, char *buf) > +{ > + struct ltc2471_data *data = dev_get_drvdata(dev); > + int value; > + > + value = ltc2471_get_value(data->i2c); > + if (unlikely(value < 0)) > + return value; > + > + if (data->differential) > + /* Ranges from -VREF to +VREF with "0" at 0x8000 */ > + value = ((s32)LTC2471_VREF * (s32)(value - 0x8000)) >> 15; > + else > + /* Ranges from 0 to +VREF */ > + value = ((u32)LTC2471_VREF * (u32)value) >> 16; > + > + return snprintf(buf, PAGE_SIZE, "%d\n", value); > +} > + > +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2471_show_value, NULL, 0); Octal permissions are preferred over S_IRUGO and such. > + > +static struct attribute *ltc2471_attrs[] = { > + &sensor_dev_attr_in0_input.dev_attr.attr, > + NULL > +}; > + > +ATTRIBUTE_GROUPS(ltc2471); > + > +static int ltc2471_i2c_probe(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + int ret; > + struct device *hwmon_dev; > + struct ltc2471_data *data; > + > + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) > + return -ENODEV; > + > + data = devm_kzalloc(&i2c->dev, sizeof(struct ltc2471_data), GFP_KERNEL); sizeof(*data) > + if (unlikely(!data)) > + return -ENOMEM; > + > + data->i2c = i2c; > + data->differential = (id->driver_data == ltc2473); > + > + /* Trigger once to start conversion and check if chip is there */ > + ret = ltc2471_get_value(i2c); > + if (ret < 0) { > + dev_err(&i2c->dev, "Cannot read from device.\n"); > + return ret; > + } > + > + hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev, > + i2c->name, > + data, > + ltc2471_groups); > + > + return PTR_ERR_OR_ZERO(hwmon_dev); > +} > + > +static const struct i2c_device_id ltc2471_i2c_id[] = { > + { "ltc2471", ltc2471 }, > + { "ltc2473", ltc2473 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id); > + > +static struct i2c_driver ltc2471_i2c_driver = { > + .driver = { > + .name = "ltc2471", > + }, > + .probe = ltc2471_i2c_probe, > + .id_table = ltc2471_i2c_id, > +}; > + > +module_i2c_driver(ltc2471_i2c_driver); > + > +MODULE_DESCRIPTION("LTC2471/LTC2473 Sensor Driver"); > +MODULE_AUTHOR("Topic Embedded Products"); > +MODULE_LICENSE("GPL v2"); > -- > 1.9.1 > Frans -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html