Our board has 4 DS18B20 1-wire temperature sensors. Each 1-wire bus and the
sensor under it is already configured against the Linux 1-wire driver
(called w1). They have a sysfs file(e.g.
/sys/bus/w1/devices/w1_bus_master1/28-000007704f4c/w1_slave) which, when read,
runs code to read the temperature. We'd like the temperatures to show up in
hwmon, so that the BMC IPMI sensor plumbing can forward those to host.
This patchset is based on linux mainline version v4.10.
Tested:
Yes; On a board with 4 DS18B20 1-wire temperature sensors:
root@zaius:/sys/class/hwmon# ls
hwmon0 hwmon1 hwmon2 hwmon3 hwmon4 hwmon5
root@zaius:/sys/class/hwmon# cd hwmon0
root@zaius:/sys/class/hwmon/hwmon0# ls
device name subsystem temp1_input uevent
root@zaius:/sys/class/hwmon/hwmon0# cat temp1_input
24500
root@zaius:/sys/class/hwmon/hwmon0# cd ..
root@zaius:/sys/class/hwmon# cd hwmon1
root@zaius:/sys/class/hwmon/hwmon1# cat temp1_input
26562
root@zaius:/sys/class/hwmon/hwmon1# cd ..
root@zaius:/sys/class/hwmon# cd hwmon2
root@zaius:/sys/class/hwmon/hwmon2# cat temp1_input
27250
root@zaius:/sys/class/hwmon/hwmon2# cd ..
root@zaius:/sys/class/hwmon# cd hwmon3
root@zaius:/sys/class/hwmon/hwmon3# cat temp1_input
22250
root@zaius:/sys/class/hwmon/hwmon3#
Jaghathiswari Rankappagounder Natarajan (3):
drivers: w1: add hwmon support structures
drivers: w1: refactor w1_slave_show to make the temp reading
functionality separate
drivers: w1: add hwmon temp support for w1_therm
drivers/w1/slaves/w1_therm.c | 124 ++++++++++++++++++++++++++++++++-----------
drivers/w1/w1.c | 20 ++++++-
drivers/w1/w1.h | 2 +
drivers/w1/w1_family.h | 2 +
4 files changed, 117 insertions(+), 31 deletions(-)
--
2.13.1.508.gb3defc5cc-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
