pwm4 is enabled if bit 2 of GPIO control register 4 is disabled, not when it is enabled. Since the check is for the skip condition, it is reversed. This applies to both IT8620 and IT8628. Fixes: 36c4d98a7883d ("hwmon: (it87) Add support for all pwm channels ...") Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/it87.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 85918d8a747a..4f3fabcd470d 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2614,7 +2614,7 @@ static int __init it87_find(int sioaddr, unsigned short *address, /* Check for pwm4 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG); - if (!(reg & BIT(2))) + if (reg & BIT(2)) sio_data->skip_pwm |= BIT(3); /* Check for pwm2, fan2 */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html