Hi Guenter, On Sun, 4 Dec 2016 20:55:39 -0800, Guenter Roeck wrote: > Writes into limit attributes can overflow due to additions and > multiplications with unchecked parameters. > > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > drivers/hwmon/gl518sm.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c > index 0212c8317bca..0a11a550c2a2 100644 > --- a/drivers/hwmon/gl518sm.c > +++ b/drivers/hwmon/gl518sm.c > @@ -86,9 +86,8 @@ enum chips { gl518sm_r00, gl518sm_r80 }; > #define BOOL_FROM_REG(val) ((val) ? 0 : 1) > #define BOOL_TO_REG(val) ((val) ? 0 : 1) > > -#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \ > - (val) - 500 : \ > - (val) + 500) / 1000) + 119), 0, 255) > +#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(clamp_val(val, -119000, 136000), \ > + 1000) + 119) > #define TEMP_FROM_REG(val) (((val) - 119) * 1000) > > static inline u8 FAN_TO_REG(long rpm, int div) > @@ -101,10 +100,11 @@ static inline u8 FAN_TO_REG(long rpm, int div) > } > #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div)))) > > -#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255) > +#define IN_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val(val, 0, 255 * 19), 19) > #define IN_FROM_REG(val) ((val) * 19) > > -#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, 255) > +#define VDD_TO_REG(val) \ > + DIV_ROUND_CLOSEST(clamp_val(val, 0, 255 * 95 / 4) * 4, 95) > #define VDD_FROM_REG(val) (((val) * 95 + 2) / 4) > > #define DIV_FROM_REG(val) (1 << (val)) Code looks good. Alignment is a bit clumsy though. Also it feels strange now that you are using DIV_ROUND_CLOSEST for VDD_TO_REG but not VDD_FROM_REG. Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> -- Jean Delvare SUSE L3 Support -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html