On Thu, Dec 08, 2016 at 02:57:00PM +0100, Jean Delvare wrote: > On Sun, 4 Dec 2016 20:55:27 -0800, Guenter Roeck wrote: > > Module test reports overflows when writing into temperature and voltage > > limit attributes > > > > temp1_min: Suspected overflow: [127000 vs. 0] > > temp1_max: Suspected overflow: [127000 vs. 0] > > temp1_offset: Suspected overflow: [127000 vs. 0] > > temp2_min: Suspected overflow: [127000 vs. 0] > > temp2_max: Suspected overflow: [127000 vs. 0] > > temp2_offset: Suspected overflow: [127000 vs. 0] > > temp3_min: Suspected overflow: [127000 vs. 0] > > temp3_max: Suspected overflow: [127000 vs. 0] > > temp3_offset: Suspected overflow: [127000 vs. 0] > > in0_min: Suspected overflow: [3320 vs. 0] > > in0_max: Suspected overflow: [3320 vs. 0] > > in4_min: Suspected overflow: [15938 vs. 0] > > in4_max: Suspected overflow: [15938 vs. 0] > > in6_min: Suspected overflow: [1992 vs. 0] > > in6_max: Suspected overflow: [1992 vs. 0] > > in7_min: Suspected overflow: [2391 vs. 0] > > in7_max: Suspected overflow: [2391 vs. 0] > > > > The problem is caused by conversions from unsigned long to long and > > from long to int. > > > > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> > > --- > > drivers/hwmon/smsc47m192.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c > > index 6ac7cda72d4c..202e167d6a59 100644 > > --- a/drivers/hwmon/smsc47m192.c > > +++ b/drivers/hwmon/smsc47m192.c > > @@ -77,6 +77,7 @@ static inline unsigned int IN_FROM_REG(u8 reg, int n) > > > > static inline u8 IN_TO_REG(unsigned long val, int n) > > { > > + val = clamp_val(val, 0, 65535); > > return clamp_val(SCALE(val, 192, nom_mv[n]), 0, 255); > > } > > Same as for adm9240, I would suggest to remove the second clamp_val(): > > static inline u8 IN_TO_REG(unsigned long val, int n) > { > val = clamp_val(val, 0, nom_mv[n] * 255 / 192); > return SCALE(val, 192, nom_mv[n]); > } > I updated the patch accordingly. Thanks, Guenter > > > > @@ -84,7 +85,7 @@ static inline u8 IN_TO_REG(unsigned long val, int n) > > * TEMP: 0.001 degC units (-128C to +127C) > > * REG: 1C/bit, two's complement > > */ > > -static inline s8 TEMP_TO_REG(int val) > > +static inline s8 TEMP_TO_REG(long val) > > { > > return SCALE(clamp_val(val, -128000, 127000), 1, 1000); > > } > > Other than this: > > Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> > > -- > Jean Delvare > SUSE L3 Support > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html