On 11/13/2016 08:27 AM, Rudolf Marek wrote:
Hi Patrik
Please read this:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/hwmon/w83627ehf?id=refs/tags/v4.9-rc4
IIRC you need to set it to manual mode first via echo 1 > .../pwmX_enable
and perhaps then it will accept your PWM values.
Correct.
In general, though, I would suggest to stick with automatic fan control.
Guenter
I'm giving proper mailing list on CC, maybe someone will help.
Thanks
Rudolf
Dne 13.11.2016 v 17:18 Patrik Dufresne napsal(a):
Hello,
Sorry to contact you directly, but I didn't find the proper mailing list to post
my question related to w83627ehf driver.
I own a Supermicro X8DTL-iF with a Winbond W83627DHG-P chipset. The chipset was
properly discovered and enabled by lm-sensors. In sysfs, I can see the path
/sys/devices/platform/w83627ehf.2576.
I've tried changing the value of pwm* according
to https://www.kernel.org/doc/Documentation/hwmon/w83627ehf. But it doesn't have
any effect on the actual fan speed.
Any suggestions ?
--
Patrik Dufresne Service Logiciel inc.
http://www.patrikdufresne.com <http://patrikdufresne.com/>/
514-971-6442
1-114 rue des Hautbois,
St-Colomban, QC J5K 2H6
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
