Add a device node for the System Group Fuse Control and Monitor block of the Pin Function Controller (PFC) on the R-Car S4-8 (R8A779F0) SoC, which provides E-FUSE services. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- v2: - s/r8a779g0/r8a779f0/ in one-line summary, - Add Reviewed-by. Assuming the Fuse Control and Monitor block is driven by the same module clock as GPIO Group 0. --- arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 72cf30341fc4d63e..48390654e172bd5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -377,6 +377,14 @@ gpio3: gpio@e6051980 { #interrupt-cells = <2>; }; + fuse: fuse@e6078800 { + compatible = "renesas,r8a779f0-efuse"; + reg = <0 0xe6078800 0 0x100>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + }; + cmt0: timer@e60f0000 { compatible = "renesas,r8a779f0-cmt0", "renesas,rcar-gen4-cmt0"; -- 2.34.1