[PATCH v2 2/4] mfd: adp5585: Add Analog Devices ADP5585 core support

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

From: Haibo Chen <haibo.chen@xxxxxxx>

The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the chip by modelling it as an MFD device, with two
child devices for the GPIO and PWM functions.

The driver is derived from an initial implementation from NXP, available
in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
support") in their BSP kernel tree. It has been extensively rewritten.

Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
Changes since v1:

- Add comment to explain BANK and BIT macros
- Drop compatible strings from cells
- White space fixes
- Fix comparison to NULL

Changes compared to the NXP original version:

- Add MAINTAINERS entry
- Fix compatible strings for child devices
- Fix header guards
- Use lowercase hex constants
- White space fixes
- Use module_i2c_driver()
- Switch to regmap
- Drop I2C device ID table
- Drop ADP5585_REG_MASK
- Support R5 GPIO pin
- Drop dev field from adp5585_dev structure
- Check device ID at probe time
- Fix register field names
- Update copyright
- Update license to GPL-2.0-only
- Implement suspend/resume
---
 MAINTAINERS                 |   2 +
 drivers/mfd/Kconfig         |  11 ++
 drivers/mfd/Makefile        |   1 +
 drivers/mfd/adp5585.c       | 200 ++++++++++++++++++++++++++++++++++++
 include/linux/mfd/adp5585.h | 127 +++++++++++++++++++++++
 5 files changed, 341 insertions(+)
 create mode 100644 drivers/mfd/adp5585.c
 create mode 100644 include/linux/mfd/adp5585.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 3016b003ead3..77b93fbdf5cc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -532,6 +532,8 @@ L:	linux-gpio@xxxxxxxxxxxxxxx
 L:	linux-pwm@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/adi,adp5585*.yaml
+F:	drivers/mfd/adp5585.c
+F:	include/linux/mfd/adp5585.h
 
 ADP5588 QWERTY KEYPAD AND IO EXPANDER DRIVER (ADP5588/ADP5587)
 M:	Michael Hennerich <michael.hennerich@xxxxxxxxxx>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 266b4f54af60..8a7ab8af217f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -20,6 +20,17 @@ config MFD_CS5535
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
 	  necessary for using the board's GPIO and MFGPT functionality.
 
+config MFD_ADP5585
+	tristate "Analog Devices ADP5585 MFD driver"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C && OF
+	help
+	  Say yes here to add support for the Analog Devices ADP5585 GPIO
+	  expander, PWM and keypad controller. This includes the I2C driver and
+	  the core APIs _only_, you have to select individual components like
+	  the GPIO and PWM functions under the corresponding menus.
+
 config MFD_ALTERA_A10SR
 	bool "Altera Arria10 DevKit System Resource chip"
 	depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c66f07edcd0e..37f36a019a68 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -188,6 +188,7 @@ obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
+obj-$(CONFIG_MFD_ADP5585)	+= adp5585.o
 obj-$(CONFIG_MFD_KEMPLD)	+= kempld-core.o
 obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+= intel_quark_i2c_gpio.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
diff --git a/drivers/mfd/adp5585.c b/drivers/mfd/adp5585.c
new file mode 100644
index 000000000000..4f7e065e5314
--- /dev/null
+++ b/drivers/mfd/adp5585.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller
+ *
+ * Copyright 2022 NXP
+ * Copyright 2024 Ideas on Board Oy
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/adp5585.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell adp5585_devs[] = {
+	{ .name = "adp5585-gpio", },
+	{ .name = "adp5585-pwm", },
+};
+
+static const struct regmap_range adp5585_volatile_ranges[] = {
+	regmap_reg_range(ADP5585_ID, ADP5585_GPI_STATUS_B),
+};
+
+static const struct regmap_access_table adp5585_volatile_regs = {
+	.yes_ranges = adp5585_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(adp5585_volatile_ranges),
+};
+
+static const u8 adp5585_regmap_defaults_00[ADP5585_MAX_REG + 1] = {
+	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x18 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static const u8 adp5585_regmap_defaults_02[ADP5585_MAX_REG + 1] = {
+	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3,
+	/* 0x18 */ 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static const u8 adp5585_regmap_defaults_04[ADP5585_MAX_REG + 1] = {
+	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55,
+	/* 0x18 */ 0x05, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+enum adp5585_regmap_type {
+	ADP5585_REGMAP_00,
+	ADP5585_REGMAP_02,
+	ADP5585_REGMAP_04,
+};
+
+static const struct regmap_config adp5585_regmap_configs[] = {
+	[ADP5585_REGMAP_00] = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = ADP5585_MAX_REG,
+		.volatile_table = &adp5585_volatile_regs,
+		.cache_type = REGCACHE_MAPLE,
+		.reg_defaults_raw = adp5585_regmap_defaults_00,
+		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_00),
+	},
+	[ADP5585_REGMAP_02] = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = ADP5585_MAX_REG,
+		.volatile_table = &adp5585_volatile_regs,
+		.cache_type = REGCACHE_MAPLE,
+		.reg_defaults_raw = adp5585_regmap_defaults_02,
+		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_02),
+	},
+	[ADP5585_REGMAP_04] = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = ADP5585_MAX_REG,
+		.volatile_table = &adp5585_volatile_regs,
+		.cache_type = REGCACHE_MAPLE,
+		.reg_defaults_raw = adp5585_regmap_defaults_04,
+		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_04),
+	},
+};
+
+static int adp5585_i2c_probe(struct i2c_client *i2c)
+{
+	const struct regmap_config *regmap_config;
+	struct adp5585_dev *adp5585;
+	unsigned int id;
+	int ret;
+
+	adp5585 = devm_kzalloc(&i2c->dev, sizeof(struct adp5585_dev),
+			       GFP_KERNEL);
+	if (!adp5585)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, adp5585);
+
+	regmap_config = of_device_get_match_data(&i2c->dev);
+	adp5585->regmap = devm_regmap_init_i2c(i2c, regmap_config);
+	if (IS_ERR(adp5585->regmap))
+		return dev_err_probe(&i2c->dev, PTR_ERR(adp5585->regmap),
+				     "Failed to initialize register map\n");
+
+	/* Verify the device ID. */
+	ret = regmap_read(adp5585->regmap, ADP5585_ID, &id);
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret,
+				     "Failed to read device ID\n");
+
+	if (ADP5585_MAN_ID(id) != ADP5585_MAN_ID_VALUE)
+		return dev_err_probe(&i2c->dev, -ENODEV,
+				     "Invalid device ID 0x%02x\n", id);
+
+	dev_dbg(&i2c->dev, "device ID 0x%02x\n", id);
+
+	/* Add MFD devices. */
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   adp5585_devs, ARRAY_SIZE(adp5585_devs),
+				   NULL, 0, NULL);
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret,
+				     "Failed to add MFD devices\n");
+
+	return 0;
+}
+
+static int adp5585_suspend(struct device *dev)
+{
+	struct adp5585_dev *adp5585 = dev_get_drvdata(dev);
+
+	regcache_cache_only(adp5585->regmap, true);
+
+	return 0;
+}
+
+static int adp5585_resume(struct device *dev)
+{
+	struct adp5585_dev *adp5585 = dev_get_drvdata(dev);
+
+	regcache_cache_only(adp5585->regmap, false);
+	regcache_mark_dirty(adp5585->regmap);
+
+	return regcache_sync(adp5585->regmap);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(adp5585_pm, adp5585_suspend, adp5585_resume);
+
+static const struct of_device_id adp5585_of_match[] = {
+	{
+		.compatible = "adi,adp5585-00",
+		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
+	}, {
+		.compatible = "adi,adp5585-01",
+		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
+	}, {
+		.compatible = "adi,adp5585-02",
+		.data = &adp5585_regmap_configs[ADP5585_REGMAP_02],
+	}, {
+		.compatible = "adi,adp5585-03",
+		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
+	}, {
+		.compatible = "adi,adp5585-04",
+		.data = &adp5585_regmap_configs[ADP5585_REGMAP_04],
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, adp5585_of_match);
+
+static struct i2c_driver adp5585_i2c_driver = {
+	.driver = {
+		.name = "adp5585",
+		.of_match_table = of_match_ptr(adp5585_of_match),
+		.pm = pm_sleep_ptr(&adp5585_pm),
+	},
+	.probe = adp5585_i2c_probe,
+};
+module_i2c_driver(adp5585_i2c_driver);
+
+MODULE_DESCRIPTION("ADP5585 core driver");
+MODULE_AUTHOR("Haibo Chen <haibo.chen@xxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/adp5585.h b/include/linux/mfd/adp5585.h
new file mode 100644
index 000000000000..7682182b10d1
--- /dev/null
+++ b/include/linux/mfd/adp5585.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller
+ *
+ * Copyright 2022 NXP
+ * Copyright 2024 Ideas on Board Oy
+ */
+
+#ifndef __LINUX_MFD_ADP5585_H_
+#define __LINUX_MFD_ADP5585_H_
+
+#include <linux/bits.h>
+
+#define ADP5585_ID			0x00
+#define		ADP5585_MAN_ID(v)		(((v) & 0xf0) >> 4)
+#define		ADP5585_MAN_ID_VALUE		0x02
+#define ADP5585_INT_STATUS		0x01
+#define ADP5585_STATUS			0x02
+#define ADP5585_FIFO_1			0x03
+#define ADP5585_FIFO_2			0x04
+#define ADP5585_FIFO_3			0x05
+#define ADP5585_FIFO_4			0x06
+#define ADP5585_FIFO_5			0x07
+#define ADP5585_FIFO_6			0x08
+#define ADP5585_FIFO_7			0x09
+#define ADP5585_FIFO_8			0x0a
+#define ADP5585_FIFO_9			0x0b
+#define ADP5585_FIFO_10			0x0c
+#define ADP5585_FIFO_11			0x0d
+#define ADP5585_FIFO_12			0x0e
+#define ADP5585_FIFO_13			0x0f
+#define ADP5585_FIFO_14			0x10
+#define ADP5585_FIFO_15			0x11
+#define ADP5585_FIFO_16			0x12
+#define ADP5585_GPI_INT_STAT_A		0x13
+#define ADP5585_GPI_INT_STAT_B		0x14
+#define ADP5585_GPI_STATUS_A		0x15
+#define ADP5585_GPI_STATUS_B		0x16
+#define ADP5585_RPULL_CONFIG_A		0x17
+#define ADP5585_RPULL_CONFIG_B		0x18
+#define ADP5585_RPULL_CONFIG_C		0x19
+#define ADP5585_RPULL_CONFIG_D		0x1a
+#define		ADP5585_Rx_PULL_CFG(n, v)	((v) << ((n) * 2))
+#define		ADP5585_Rx_PULL_CFG_PU_300K	(0)
+#define		ADP5585_Rx_PULL_CFG_PD_300K	(1)
+#define		ADP5585_Rx_PULL_CFG_PU_100K	(2)
+#define		ADP5585_Rx_PULL_CFG_DISABLE	(3)
+#define		ADP5585_Rx_PULL_CFG_MASK	(3)
+#define ADP5585_GPI_INT_LEVEL_A		0x1b
+#define ADP5585_GPI_INT_LEVEL_B		0x1c
+#define ADP5585_GPI_EVENT_EN_A		0x1d
+#define ADP5585_GPI_EVENT_EN_B		0x1e
+#define ADP5585_GPI_INTERRUPT_EN_A	0x1f
+#define ADP5585_GPI_INTERRUPT_EN_B	0x20
+#define ADP5585_DEBOUNCE_DIS_A		0x21
+#define ADP5585_DEBOUNCE_DIS_B		0x22
+#define ADP5585_GPO_DATA_OUT_A		0x23
+#define ADP5585_GPO_DATA_OUT_B		0x24
+#define ADP5585_GPO_OUT_MODE_A		0x25
+#define ADP5585_GPO_OUT_MODE_B		0x26
+#define ADP5585_GPIO_DIRECTION_A	0x27
+#define ADP5585_GPIO_DIRECTION_B	0x28
+#define ADP5585_RESET1_EVENT_A		0x29
+#define ADP5585_RESET1_EVENT_B		0x2a
+#define ADP5585_RESET1_EVENT_C		0x2b
+#define ADP5585_RESET2_EVENT_A		0x2c
+#define ADP5585_RESET2_EVENT_B		0x2d
+#define ADP5585_RESET_CFG		0x2e
+#define ADP5585_PWM_OFFT_LOW		0x2f
+#define ADP5585_PWM_OFFT_HIGH		0x30
+#define ADP5585_PWM_ONT_LOW		0x31
+#define ADP5585_PWM_ONT_HIGH		0x32
+#define ADP5585_PWM_CFG			0x33
+#define		ADP5585_PWM_IN_AND		BIT(2)
+#define		ADP5585_PWM_MODE		BIT(1)
+#define		ADP5585_PWM_EN			BIT(0)
+#define ADP5585_LOGIC_CFG		0x34
+#define ADP5585_LOGIC_FF_CFG		0x35
+#define ADP5585_LOGIC_INT_EVENT_EN	0x36
+#define ADP5585_POLL_PTIME_CFG		0x37
+#define ADP5585_PIN_CONFIG_A		0x38
+#define ADP5585_PIN_CONFIG_B		0x39
+#define ADP5585_PIN_CONFIG_C		0x3a
+#define		ADP5585_PULL_SELECT		BIT(7)
+#define		ADP5585_C4_EXTEND_CFG_GPIO11	(0U << 6)
+#define		ADP5585_C4_EXTEND_CFG_RESET2	(1U << 6)
+#define		ADP5585_C4_EXTEND_CFG_MASK	(1U << 6)
+#define		ADP5585_R4_EXTEND_CFG_GPIO5	(0U << 5)
+#define		ADP5585_R4_EXTEND_CFG_RESET1	(1U << 5)
+#define		ADP5585_R4_EXTEND_CFG_MASK	(1U << 5)
+#define		ADP5585_R3_EXTEND_CFG_GPIO4	(0U << 2)
+#define		ADP5585_R3_EXTEND_CFG_LC	(1U << 2)
+#define		ADP5585_R3_EXTEND_CFG_PWM_OUT	(2U << 2)
+#define		ADP5585_R3_EXTEND_CFG_MASK	(3U << 2)
+#define		ADP5585_R0_EXTEND_CFG_GPIO1	(0U << 0)
+#define		ADP5585_R0_EXTEND_CFG_LY	(1U << 0)
+#define		ADP5585_R0_EXTEND_CFG_MASK	(1U << 0)
+#define ADP5585_GENERAL_CFG		0x3b
+#define		ADP5585_OSC_EN			BIT(7)
+#define		ADP5585_OSC_FREQ_50KHZ		(0U << 5)
+#define		ADP5585_OSC_FREQ_100KHZ		(1U << 5)
+#define		ADP5585_OSC_FREQ_200KHZ		(2U << 5)
+#define		ADP5585_OSC_FREQ_500KHZ		(3U << 5)
+#define		ADP5585_OSC_FREQ_MASK		(3U << 5)
+#define		ADP5585_INT_CFG			BIT(1)
+#define		ADP5585_RST_CFG			BIT(0)
+#define ADP5585_INT_EN			0x3c
+
+#define ADP5585_MAX_REG			ADP5585_INT_EN
+
+/*
+ * Bank 0 covers pins "GPIO 1/R0" to "GPIO 6/R5", numbered 0 to 5 by the
+ * driver, and bank 1 covers pins "GPIO 7/C0" to "GPIO 11/C4", numbered 6 to
+ * 10. Some variants of the ADP5585 don't support "GPIO 6/R5". As the driver
+ * uses identical GPIO numbering for all variants to avoid confusion, GPIO 5 is
+ * marked as reserved in the device tree for variants that don't support it.
+ */
+#define ADP5585_BANK(n)			((n) >= 6 ? 1 : 0)
+#define ADP5585_BIT(n)			((n) >= 6 ? BIT((n) - 6) : BIT(n))
+
+struct regmap;
+
+struct adp5585_dev {
+	struct regmap *regmap;
+};
+
+#endif
-- 
Regards,

Laurent Pinchart