[PATCH 10/13] dt-bindings: mfd: pm8008: rework binding

[Johan Hovold <johan+linaro@xxxxxxxxxx>]

Rework the pm8008 binding by dropping internal details like register
offsets and interrupts and by adding the missing regulator and
temperature alarm properties.

Note that child nodes are still used for pinctrl and regulator
configuration.

Also note that the pinctrl state definition will be extended later and
could eventually also be shared with other PMICs (e.g. by breaking out
bits of qcom,pmic-gpio.yaml).

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 .../devicetree/bindings/mfd/qcom,pm8008.yaml  | 154 ++++++++++--------
 1 file changed, 90 insertions(+), 64 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index e1e05921afb4..ac1bab0261b6 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -19,116 +19,142 @@ properties:
     const: qcom,pm8008
 
   reg:
-    description:
-      I2C slave address.
-
     maxItems: 1
 
   interrupts:
     maxItems: 1
 
-    description: Parent interrupt.
-
   reset-gpios:
     maxItems: 1
 
-  "#interrupt-cells":
+  vdd_l1_l2-supply: true
+  vdd_l3_l4-supply: true
+  vdd_l5-supply: true
+  vdd_l6-supply: true
+  vdd_l7-supply: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
     const: 2
 
-    description: |
-      The first cell is the IRQ number, the second cell is the IRQ trigger
-      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+  gpio-ranges:
+    maxItems: 1
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 1
+  "#interrupt-cells":
+    const: 2
 
-  "#size-cells":
+  "#thermal-sensor-cells":
     const: 0
 
-patternProperties:
-  "^gpio@[0-9a-f]+$":
+  pinctrl:
     type: object
+    additionalProperties: false
+    patternProperties:
+      "-state$":
+        type: object
+        $ref: "#/$defs/qcom-pm8008-pinctrl-state"
+        unevaluatedProperties: false
 
-    description: |
-      The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,pm8008-gpio
-          - const: qcom,spmi-gpio
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
 
-      reg:
-        description: Peripheral address of one of the two GPIO peripherals.
-        maxItems: 1
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd_l1_l2-supply
+  - vdd_l3_l4-supply
+  - vdd_l5-supply
+  - vdd_l6-supply
+  - vdd_l7-supply
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#thermal-sensor-cells"
 
-      gpio-controller: true
+additionalProperties: false
 
-      gpio-ranges:
-        maxItems: 1
+$defs:
+  qcom-pm8008-pinctrl-state:
+    type: object
 
-      interrupt-controller: true
+    allOf:
+      - $ref: /schemas/pinctrl/pinmux-node.yaml
+      - $ref: /schemas/pinctrl/pincfg-node.yaml
 
-      "#interrupt-cells":
-        const: 2
+    properties:
+      pins:
+        items:
+          pattern: "^gpio[12]$"
 
-      "#gpio-cells":
-        const: 2
+      function:
+        items:
+          - enum:
+              - normal
 
     required:
-      - compatible
-      - reg
-      - gpio-controller
-      - interrupt-controller
-      - "#gpio-cells"
-      - gpio-ranges
-      - "#interrupt-cells"
+      - pins
+      - function
 
     additionalProperties: false
 
-required:
-  - compatible
-  - reg
-  - interrupts
-  - "#address-cells"
-  - "#size-cells"
-  - "#interrupt-cells"
-
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      pmic@8 {
+      pm8008: pmic@8 {
         compatible = "qcom,pm8008";
         reg = <0x8>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        interrupt-controller;
-        #interrupt-cells = <2>;
 
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
         reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
 
-        pm8008_gpios: gpio@c000 {
-          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
-          reg = <0xc000>;
-          gpio-controller;
-          gpio-ranges = <&pm8008_gpios 0 0 2>;
-          #gpio-cells = <2>;
-          interrupt-controller;
-          #interrupt-cells = <2>;
+        vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+        vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+        vdd_l5-supply = <&vreg_bob>;
+        vdd_l6-supply = <&vreg_bob>;
+        vdd_l7-supply = <&vreg_bob>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pm8008 0 0 2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        #thermal-sensor-cells = <0>;
+
+        pinctrl {
+          gpio-keys-state {
+            pins = "gpio1";
+            function = "normal";
+          };
+        };
+
+        regulators {
+          ldo1 {
+            regulator-name = "vreg_l1";
+            regulator-min-microvolt = <950000>;
+            regulator-max-microvolt = <1300000>;
+          };
         };
       };
     };
-- 
2.43.2