[PATCH v5 00/11] Add suspend to ram support for PCIe on J7200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds suspend to ram support for the PCIe (RC mode) on J7200 platform.

In this 5th iteration, the series was rebased on Linux 6.9-rc1.

The PHY patches were moved to a dedicated series.

The patch for the pinctrl-single driver was removed, as it was already
applied to the pinctrl tree.

Regards,

Thomas

Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
---
Changes in v5:
- all: series rebased on Linux 6.9-rc1
- pinctrl-single: patch removed (already applied to the pinctrl tree)
- phy: patches moved to a dedicated series.
- pci: add T_PERST_CLK_US macro.
- pci-j721e: update the comments about T_PERST_CLK_US.
- Link to v4: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v4-0-6f1f53390c85@xxxxxxxxxxx

Changes in v4:
- all: use SoB/Co-developed-by for patches initially developed by Théo
  Lebrun.
- pinctrl-single: squash the two commits.
- i2c-omap: fix line lenghts of the comment in omap_i2c_suspend().
- mux: mux_chip_resume() return 0 or at the first error.
- phy-j721e-wiz: clean code around dev_err_probe().
- phy-j721e-wiz: use REF_CLK_100MHZ macros.
- pci: fix subject line for all PCI patches.
- pci-cadence: use fsleep() instead of usleep_range().
- pci-cadence: remove cdns_torrent_clk_cleanup() call in
  cdns_torrent_phy_resume_noirq().
- pci-j721e: add a patch to use dev_err_probe() instead of dev_err() in the probe().
- pci-j721e: fix unordered header files.
- pci-j721e: remove some log spammers.
- pci-j721e: add a missing clock disable in j721e_pcie_resume_noirq().
- pci-j721e: simplify the patch "Add reset GPIO to struct j721e_pcie"
- Link to v3: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@xxxxxxxxxxx

Changes in v3:
- pinctrl-single: split patch in two parts, a first patch to remove the
  dead code, a second to move suspend()/resume() callbacks to noirq.
- i2c-omap: add a comments above the suspend_noirq() callback.
- mux: now mux_chip_resume() try to restores all muxes, then return 0 if
  all is ok or the first failure.
- mmio: fix commit message.
- phy-j721e-wiz: add a patch to use dev_err_probe() instead of dev_err() in
  the wiz_clock_init() function.
- phy-j721e-wiz: remove probe boolean for the wiz_clock_init(), rename the
  function to wiz_clock_probe(), extract hardware configuration part in a
  new function wiz_clock_init().
- phy-cadence-torrent: use dev_err_probe() and fix commit messages
- pcie-cadence-host: remove probe boolean for the cdns_pcie_host_setup()
  function and extract the link setup part in a new function
  cdns_pcie_host_link_setup().
- pcie-cadence-host: make cdns_pcie_host_init() global.
- pci-j721e: use the cdns_pcie_host_link_setup() cdns_pcie_host_init()
  functions in the resume_noirq() callback.
- Link to v2: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v2-0-8e4f7d228ec2@xxxxxxxxxxx

Changes in v2:
- all: fix commits messages.
- all: use DEFINE_NOIRQ_DEV_PM_OPS and pm_sleep_ptr macros.
- all: remove useless #ifdef CONFIG_PM.
- pinctrl-single: drop dead code
- mux: add mux_chip_resume() function in mux core.
- mmio: resume sequence is now a call to mux_chip_resume().
- phy-cadence-torrent: fix typo in resume sequence (reset_control_assert()
  instead of reset_control_put()).
- phy-cadence-torrent: use PHY instead of phy.
- pci-j721e: do not shadow cdns_pcie_host_setup return code in resume
  sequence.
- pci-j721e: drop dead code.
- Link to v1: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v1-0-84e55da52400@xxxxxxxxxxx

---
Thomas Richard (8):
      gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()
      i2c: omap: wakeup the controller during suspend() callback
      mux: add mux_chip_resume() function
      PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()
      PCI: cadence: Set cdns_pcie_host_init() global
      PCI: j721e: Use dev_err_probe() in the probe() function
      PCI: Add T_PERST_CLK_US macro
      PCI: j721e: Use T_PERST_CLK_US macro

Théo Lebrun (3):
      mux: mmio: add resume support
      PCI: j721e: Add reset GPIO to struct j721e_pcie
      PCI: j721e: Add suspend and resume support

 drivers/gpio/gpio-pca953x.c                        |   7 +-
 drivers/i2c/busses/i2c-omap.c                      |  22 ++++
 drivers/mux/core.c                                 |  29 +++++
 drivers/mux/mmio.c                                 |  12 ++
 drivers/pci/controller/cadence/pci-j721e.c         | 121 ++++++++++++++++++---
 drivers/pci/controller/cadence/pcie-cadence-host.c |  44 +++++---
 drivers/pci/controller/cadence/pcie-cadence.h      |  12 ++
 drivers/pci/pci.h                                  |   3 +
 include/linux/mux/driver.h                         |   1 +
 9 files changed, 214 insertions(+), 37 deletions(-)
---
base-commit: 3d31103a742d8c94924848dc0fb5e2ce6b701932
change-id: 20240102-j7200-pcie-s2r-ecb1a979e357

Best regards,
-- 
Thomas Richard <thomas.richard@xxxxxxxxxxx>





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux