RE: [PATCH 2/3] dt-bindings: firmware: arm,scmi: support i.MX95 SCMI Pinctrl

[Peng Fan <peng.fan@xxxxxxx>]

> Subject: RE: [PATCH 2/3] dt-bindings: firmware: arm,scmi: support i.MX95
> SCMI Pinctrl
> 
> Hi Rob,
> 
> > Subject: Re: [PATCH 2/3] dt-bindings: firmware: arm,scmi: support
> > i.MX95 SCMI Pinctrl
> >
> > On Fri, Apr 12, 2024 at 08:29:26AM +0800, Peng Fan (OSS) wrote:
> > > From: Peng Fan <peng.fan@xxxxxxx>
> > >
> > > i.MX95 SCMI Pinctrl uses OEM specific units, so add '$ref' to
> > > '/schemas/pinctrl/nxp,imx95-pinctrl.yaml' and an example.
> > >
> > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > > ---
> > >  Documentation/devicetree/bindings/firmware/arm,scmi.yaml | 8
> > > +++++---
> > >  1 file changed, 5 insertions(+), 3 deletions(-)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > index e9d3f043c4ed..ebc6c083b538 100644
> > > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > @@ -249,9 +249,11 @@ properties:
> > >
> > >    protocol@19:
> > >      type: object
> > > -    allOf:
> > > -      - $ref: '#/$defs/protocol-node'
> > > -      - $ref: /schemas/pinctrl/pinctrl.yaml
> >
> > I don't think anything from here was actually used...
> 

After some check, I work out the following:
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index e9d3f043c4ed..26b7395c4326 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -262,9 +262,12 @@ properties:
     patternProperties:
       '-pins$':
         type: object
-        allOf:
-          - $ref: /schemas/pinctrl/pincfg-node.yaml#
-          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        anyOf:
+          - $ref: /schemas/pinctrl/nxp,imx95-pinctrl.yaml
+          - allOf:
+              - $ref: /schemas/pinctrl/pincfg-node.yaml#
+              - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
         unevaluatedProperties: false
 
         description:

The nxp,imx95-pinctrl.yaml:
+patternProperties:
+  '[a-f0-9]+$':
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: name of the pin
+
+      nxp,func-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Indicates the PAD connections which function module
+
+      nxp,pin-conf:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The PAD configuration
+
+      nxp,daisy-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The select input register ID
+
+      nxp,daisy-conf:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The select input register value
+
+additionalProperties: true


The node will as below:
           scmi_pinctrl: protocol@19 {                                                             
                reg = <0x19>;                                                                       
                                                                                                    
                sd-pins {                                                                           
                  sd1cmd {                                                                          
                    pins = "sd1cmd";                                                                
                    nxp,func-id = <0>;                                                              
                    nxp,pin-conf = <0x138e>;                                                        
                  };                                                                                
                  sd1data0 {                                                                        
                    pins = "sd1data0";                                                              
                    nxp,func-id = <0>;                                                              
                    nxp,pin-conf = <0x138e>;                                                        
                  };                                                                                
                };

I will use the upper in v2.

Thanks,
Peng.
> You mean this not used?
> allOf:
>   - $ref: '#/$defs/protocol-node'
>   - $ref: /schemas/pinctrl/pinctrl.yaml
> 
> Or below?
> >
> >
> > > +    anyOf:
> > > +      - $ref: /schemas/pinctrl/nxp,imx95-pinctrl.yaml
> > > +      - allOf:
> > > +          - $ref: '#/$defs/protocol-node'
> >
> > This must always apply and should not be under the anyOf.
> 
> I just try in arm,scmi.yaml:
>   protocol@19:
>     type: object
>     allOf:
>       - $ref: '#/$defs/protocol-node'
>       - anyOf:
>           - $ref: /schemas/pinctrl/nxp,imx95-pinctrl.yaml
>           - $ref: /schemas/pinctrl/pinctrl.yaml
> 
>     unevaluatedProperties: false
> 
> And in nxp,imx95-pinctrl.yaml:
> patternProperties:
>   'grp$':
>     type: object
>     additionalProperties: false
> 
>     patternProperties:
>       '[a-f0-9]+$':
>         type: object
>         unevaluatedProperties: false
> 
> But the following example always reports:
>                 pinctrl_usdhc1: usdhc1grp {
>                     sd1-pin0 {
>                         pins = "sd1cmd";
>                         nxp,func-id = <0>;
>                         nxp,pin-conf = <0x138e>;
>                     };
>                 };
> 
> arm,scmi.example.dtb: scmi: protocol@19: Unevaluated properties are not
> allowed ('usdhc1grp' was unexpected)
> 
> Do you have any suggestions on how to write the yaml correct?
> 
> Thanks,
> Peng.
> 
> >
> > > +          - $ref: /schemas/pinctrl/pinctrl.yaml
> > >
> > >      unevaluatedProperties: false
> > >
> > >
> > > --
> > > 2.37.1
> > >