Re: [PATCH 03/11] dt-bindings: reset: mobileye,eyeq5-reset: add EyeQ6L and EyeQ6H

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Thu Apr 11, 2024 at 8:14 AM CEST, Krzysztof Kozlowski wrote:
> On 10/04/2024 19:12, Théo Lebrun wrote:
> > Add bindings for EyeQ6L and EyeQ6H reset controllers.
> > 
> > Some controllers host a single domain, meaning a single cell is enough.
> > We do not enforce reg-names for such nodes.
> > 
> > Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> > ---
> >  .../bindings/reset/mobileye,eyeq5-reset.yaml       | 88 ++++++++++++++++++----
> >  MAINTAINERS                                        |  1 +
> >  2 files changed, 74 insertions(+), 15 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
> > index 062b4518347b..799bcf15bed9 100644
> > --- a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
> > +++ b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
> > @@ -4,11 +4,13 @@
> >  $id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
> >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  
> > -title: Mobileye EyeQ5 reset controller
> > +title: Mobileye EyeQ reset controller
> >  
> >  description:
> > -  The EyeQ5 reset driver handles three reset domains. Its registers live in a
> > -  shared region called OLB.
> > +  EyeQ reset controller handles one or more reset domains. They live in shared
> > +  regions called OLB. EyeQ5 and EyeQ6L host one OLB each, each with one reset
> > +  instance. EyeQ6H hosts 7 OLB regions; three of those (west, east,
> > +  accelerator) host reset controllers. West and east are duplicates.
> >  
> >  maintainers:
> >    - Grégory Clement <gregory.clement@xxxxxxxxxxx>
> > @@ -17,27 +19,83 @@ maintainers:
> >  
> >  properties:
> >    compatible:
> > -    const: mobileye,eyeq5-reset
> > +    enum:
> > +      - mobileye,eyeq5-reset
> > +      - mobileye,eyeq6l-reset
> > +      - mobileye,eyeq6h-we-reset
> > +      - mobileye,eyeq6h-acc-reset
> >  
> > -  reg:
> > -    maxItems: 3
> > +  reg: true
>
> Same mistakes. Please open existing bindings with multiple variants,
> e.g. some Qualcomm, and take a look how it is done there.

Thanks for the pointer to good example, that is useful! So if we take
one random binding matching
Documentation/devicetree/bindings/clock/qcom,*.yaml and that contains
the "reg-names" string, we see:

  reg:
    items:
      - description: LPASS qdsp6ss register
      - description: LPASS top-cc register

  reg-names:
    items:
      - const: qdsp6ss
      - const: top_cc

I don't understand one thing; this doesn't tell you:

   You can provide 2 MMIO blocks, which must be qdsp6ss and top_cc.

But it tells you:

   Block zero must be qdsp6ss.
   Block one must be top_cc.

If we do that I do not get the point of reg-names; we put more
information in our devicetree that is in any case imposed.

This is why I went with a different approach looking like:

  reg:
    minItems: 2
    maxItems: 2
  reg-names:
    minItems: 2
    maxItems: 2
    items:
      enum: [ d0, d1 ]

I know this is not perfect, but at least you don't enforce an order for
no reason. If "items: const..." approach should be taken, then I'll
remove reg-names which bring no benefit.

Thanks Krzysztof,

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com






[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux