The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin and a broken wp pin which always reports the card being write-protected. Add a DMI quirk to address both issues. Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/mmc/host/sdhci-acpi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index d2003d3be6ba..c0d77f589deb 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -80,6 +80,7 @@ struct sdhci_acpi_host { enum { DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP = BIT(0), DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1), + DMI_QUIRK_SD_CD_ACTIVE_HIGH = BIT(2), }; static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c) @@ -747,6 +748,26 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = { }, .driver_data = (void *)DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP, }, + { + /* + * Lenovo Yoga Tablet 2 Pro 1380F/L (13" Android version) this + * has broken WP reporting and an inverted CD signal. + * Note this has more or less the same BIOS as the Lenovo Yoga + * Tablet 2 830F/L or 1050F/L (8" and 10" Android), but unlike + * the 830 / 1050 models which share the same mainboard this + * model has a different mainboard and the inverted CD and + * broken WP are unique to this board. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), + /* Full match so as to NOT match the 830/1050 BIOS */ + DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21.X64.0005.R00.1504101516"), + }, + .driver_data = (void *)(DMI_QUIRK_SD_NO_WRITE_PROTECT | + DMI_QUIRK_SD_CD_ACTIVE_HIGH), + }, { /* * The Toshiba WT8-B's microSD slot always reports the card being @@ -867,6 +888,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) { bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL); + if (quirks & DMI_QUIRK_SD_CD_ACTIVE_HIGH) + host->mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0); if (err) { if (err == -EPROBE_DEFER) -- 2.44.0