From: Maciej Strozek <mstrozek@xxxxxxxxxxxxxxxxxxxxx> On some cs42l43 systems a couple of cs35l56 amplifiers are attached to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled by a SDCA class driver and these two amplifiers are controlled by firmware running on the cs42l43. However, under Linux the decision was made to interact with the cs42l43 directly, affording the user greater control over the audio system. However, this has resulted in an issue where these two bridged cs35l56 amplifiers are not populated in ACPI and must be added manually. Check for the presence of the "01fa-cirrus-sidecar-instances" property in the SDCA extension unit's ACPI properties to confirm the presence of these two amplifiers and if they exist add them manually onto the SPI bus. Signed-off-by: Maciej Strozek <mstrozek@xxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- Changes since v1: - Add some missing statics Thanks, Charles drivers/spi/spi-cs42l43.c | 152 +++++++++++++++++++++++++++++++++++++- 1 file changed, 151 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index aabef9fc84bdf..c7ee9d49d9ef4 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -5,6 +5,8 @@ // Copyright (C) 2022-2023 Cirrus Logic, Inc. and // Cirrus Logic International Semiconductor Ltd. +#include <dt-bindings/gpio/gpio.h> +#include <linux/acpi.h> #include <linux/bits.h> #include <linux/bitfield.h> #include <linux/device.h> @@ -39,6 +41,59 @@ static const unsigned int cs42l43_clock_divs[] = { 2, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 }; +static const struct software_node ampl = { + .name = "cs35l56-left", +}; + +static const struct software_node ampr = { + .name = "cs35l56-right", +}; + +static struct spi_board_info ampl_info = { + .modalias = "cs35l56", + .max_speed_hz = 2000000, + .chip_select = 0, + .mode = SPI_MODE_0, + .swnode = &l, + .use_fwnode_name = true, +}; + +static struct spi_board_info ampr_info = { + .modalias = "cs35l56", + .max_speed_hz = 2000000, + .chip_select = 1, + .mode = SPI_MODE_0, + .swnode = &r, + .use_fwnode_name = true, +}; + +static const struct software_node cs42l43_gpiochip_swnode = { + .name = "cs42l43-pinctrl", +}; + +static const struct software_node_ref_args cs42l43_cs_refs[] = { + { + .node = &cs42l43_gpiochip_swnode, + .nargs = 2, + .args = { 0, GPIO_ACTIVE_LOW }, + }, + { + .node = &swnode_gpio_undefined, + .nargs = 0, + }, +}; + +static const struct property_entry cs42l43_cs_props[] = { + { + .name = "cs-gpios", + .length = ARRAY_SIZE(cs42l43_cs_refs) * + sizeof(struct software_node_ref_args), + .type = DEV_PROP_REF, + .pointer = cs42l43_cs_refs, + }, + {} +}; + static int cs42l43_spi_tx(struct regmap *regmap, const u8 *buf, unsigned int len) { const u8 *end = buf + len; @@ -203,6 +258,51 @@ static size_t cs42l43_spi_max_length(struct spi_device *spi) return CS42L43_SPI_MAX_LENGTH; } +#if IS_ENABLED(CONFIG_ACPI) +static bool cs42l43_has_sidecar(struct fwnode_handle *fwnode) +{ + static const int func_smart_amp = 0x1; + struct fwnode_handle *child_fwnode, *ext_fwnode; + unsigned long long function; + unsigned int val; + int ret; + + if (!is_acpi_node(fwnode)) + return false; + + fwnode_for_each_child_node(fwnode, child_fwnode) { + struct acpi_device *adev = to_acpi_device_node(child_fwnode); + + ret = acpi_evaluate_integer(adev->handle, "_ADR", NULL, &function); + if (ACPI_FAILURE(ret)) + continue; + + if (function != func_smart_amp) + continue; + + ext_fwnode = fwnode_get_named_child_node(child_fwnode, + "mipi-sdca-function-expansion-subproperties"); + if (!ext_fwnode) + continue; + + ret = fwnode_property_read_u32(ext_fwnode, + "01fa-cirrus-sidecar-instances", + &val); + if (ret) + continue; + + return !!val; + } + + return false; +} +#else +static bool cs42l43_has_sidecar(struct fwnode_handle *fwnode) +{ + return false; +} +#endif + static void cs42l43_release_of_node(void *data) { fwnode_handle_put(data); @@ -213,6 +313,7 @@ static int cs42l43_spi_probe(struct platform_device *pdev) struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); struct cs42l43_spi *priv; struct fwnode_handle *fwnode = dev_fwnode(cs42l43->dev); + bool has_sidecar = cs42l43_has_sidecar(fwnode); int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); @@ -266,16 +367,64 @@ static int cs42l43_spi_probe(struct platform_device *pdev) } } - device_set_node(&priv->ctlr->dev, fwnode); + if (has_sidecar) { + ret = software_node_register(&cs42l43_gpiochip_swnode); + if (ret) { + dev_err(priv->dev, "Failed to register gpio swnode: %d\n", ret); + return ret; + } + + ret = device_create_managed_software_node(&priv->ctlr->dev, cs42l43_cs_props, NULL); + if (ret) { + dev_err(priv->dev, "Failed to add swnode: %d\n", ret); + goto err; + } + + } else { + device_set_node(&priv->ctlr->dev, fwnode); + } ret = devm_spi_register_controller(priv->dev, priv->ctlr); if (ret) { dev_err(priv->dev, "Failed to register SPI controller: %d\n", ret); + goto err; } + if (has_sidecar) { + if (!spi_new_device(priv->ctlr, &l_info)) { + ret = -ENODEV; + dev_err(priv->dev, "Failed to create left amp slave\n"); + goto err; + } + + if (!spi_new_device(priv->ctlr, &r_info)) { + ret = -ENODEV; + dev_err(priv->dev, "Failed to create right amp slave\n"); + goto err; + } + } + + return 0; + +err: + if (has_sidecar) + software_node_unregister(&cs42l43_gpiochip_swnode); + return ret; } +static int cs42l43_spi_remove(struct platform_device *pdev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); + struct fwnode_handle *fwnode = dev_fwnode(cs42l43->dev); + bool has_sidecar = cs42l43_has_sidecar(fwnode); + + if (has_sidecar) + software_node_unregister(&cs42l43_gpiochip_swnode); + + return 0; +}; + static const struct platform_device_id cs42l43_spi_id_table[] = { { "cs42l43-spi", }, {} @@ -288,6 +437,7 @@ static struct platform_driver cs42l43_spi_driver = { }, .probe = cs42l43_spi_probe, .id_table = cs42l43_spi_id_table, + .remove = cs42l43_spi_remove, }; module_platform_driver(cs42l43_spi_driver); -- 2.39.2