> On Mar 25, 2024, at 00:23, Icenowy Zheng <uwu@xxxxxxxxxx> wrote: > > 在 2024-03-23星期六的 20:12 +0800，Yangyu Chen写道： >> Add initial dts for CanMV-K230 and K230-EVB powered by Canaan >> Kendryte >> K230 SoC [1]. >> >> Some key consideration: >> >> - Only place BigCore which is 1.6GHz RV64GCBV >> >> The existence of cache coherence between the two cores remains >> unknown >> since they have dedicated L2 caches. And the factory SDK uses it for >> other OS by default. I don't know whether the two CPUs on K230 SoC >> can be used in one system. So only place BigCore here. >> >> Meanwhile, although docs from Canaan said 1.6GHz Core with Vector is >> CPU1, the CSR.MHARTID of this core is 0. > > I assume as these two cores do not have any coherency, they are just in > different hartid namespace. > Thanks for this hint. >> >> - Support for "zba" "zbb" "zbc" "zbs" are tested by hand >> >> The user manual of C908 from T-Head does not document it >> specifically. >> It just said it supports B extension V1.0. [2] >> >> I have tested it by using this [3] which attempts to execute >> "add.uw", >> "andn", "clmulr", "bclr" and they doesn't traps on K230. But on >> JH7110, >> "clmulr" and "bclr" will trap. >> >> - Support for "zicbom" is tested by hand >> >> Have tested with some out-of-tree drivers from [4] that need DMA and >> they >> do not come to the dts currently. >> >> - Cache parameters are inferred from T-Head docs [2] and Canaan docs >> [1] >> >> L1i: 32KB, VIPT 4-Way set-associative, 64B Cacheline >> L1d: 32KB, VIPT 4-Way set-associative, 64B Cacheline >> L2: 256KB, PIPT 16-way set-associative, 64B Cacheline >> >> The numbers of cache sets are calculated from these parameters. >> >> - MMU only supports Sv39 >> >> The T-Head docs [2] say the C908 core can be configured to support >> Sv48 and >> Sv39 or only Sv39. On K230, I tried to write "riscv,sv48" on mmu-type >> in >> dts and boot the mainline kernel. However, it failed during the >> kernel >> probe and fell back to Sv39. I also tested it on M-Mode software, >> writing >> Sv48 to satp.mode will not trap but will leave the CSR unchanged. > > It's specified by the spec that writing a unsupported mode to SATP will > leave SATP unchanged, and it's also how the kernel detects for Sv48/57. > > If a hardware fail to implement this behavior (make SATP changes when > writing an unsupported mode), the kernel will fail to boot and manually > specify MMU mode by putting noXlvl to command line is required. This > behavior may be observed on FSL1030M SoC of Milk-V Vega (if it ever > runs mainline kernel). > OK. >> While >> writing Sv39, it will take effect. It shows that this CPU does not >> support >> Sv48. >> >> - Svpbmt and T-Head MAEE both supported >> >> T-Head C908 does support both Svpbmt and T-Head MAEE for page-based >> memory >> attributes and is controlled by BIT(21) on CSR.MXSTATUS. The Svpbmt >> is used >> here for mainline kernel support for K230. If the kernel wants to use >> Svpbmt, the M-Mode software should unset BIT(21) of CSR.MXSTATUS >> before >> entering the S-Mode kernel. Otherwise, the kernel will not boot, as 0 >> on >> T-Head MAEE is NonCachable Memory. Once the kernel switches from bare >> metal >> to Sv39, It will lose dirty cache line modifications that haven't >> been >> written back to the memory. > > As MXSTATUS has a S-mode read-only mirror known as SXSTATUS, maybe the > kernel should detect SXSTATUS to decide whether to use Svpbmt or > Xtheadpbmt (BTW Svnapot conflicts with Xtheadpbmt too). > Thanks for this hint. I may need to change some code in the T-Head PBMT probe. >> >> [1] >> https://developer.canaan-creative.com/k230/dev/zh/00_hardware/K230_datasheet.html#chapter-1-introduction >> [2] >> https://occ-intl-prod.oss-ap-southeast-1.aliyuncs.com/resource//1699268369347/XuanTie-C908-UserManual.pdf >> [3] https://github.com/cyyself/rvb_test >> [4] https://github.com/cyyself/linux/tree/k230-mainline >> >> Signed-off-by: Yangyu Chen <cyy@xxxxxxxxxxxx> >> --- >> arch/riscv/boot/dts/canaan/Makefile | 2 + >> arch/riscv/boot/dts/canaan/k230-canmv.dts | 24 ++++ >> arch/riscv/boot/dts/canaan/k230-evb.dts | 24 ++++ >> arch/riscv/boot/dts/canaan/k230.dtsi | 140 >> ++++++++++++++++++++++ >> 4 files changed, 190 insertions(+) >> create mode 100644 arch/riscv/boot/dts/canaan/k230-canmv.dts >> create mode 100644 arch/riscv/boot/dts/canaan/k230-evb.dts >> create mode 100644 arch/riscv/boot/dts/canaan/k230.dtsi >> >> diff --git a/arch/riscv/boot/dts/canaan/Makefile >> b/arch/riscv/boot/dts/canaan/Makefile >> index 987d1f0c41f0..7d54ea5c6f3d 100644 >> --- a/arch/riscv/boot/dts/canaan/Makefile >> +++ b/arch/riscv/boot/dts/canaan/Makefile >> @@ -1,6 +1,8 @@ >> # SPDX-License-Identifier: GPL-2.0 >> dtb-$(CONFIG_ARCH_CANAAN) += canaan_kd233.dtb >> dtb-$(CONFIG_ARCH_CANAAN) += k210_generic.dtb >> +dtb-$(CONFIG_ARCH_CANAAN) += k230-canmv.dtb >> +dtb-$(CONFIG_ARCH_CANAAN) += k230-evb.dtb >> dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_bit.dtb >> dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_dock.dtb >> dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_go.dtb >> diff --git a/arch/riscv/boot/dts/canaan/k230-canmv.dts >> b/arch/riscv/boot/dts/canaan/k230-canmv.dts >> new file mode 100644 >> index 000000000000..9565915cead6 >> --- /dev/null >> +++ b/arch/riscv/boot/dts/canaan/k230-canmv.dts >> @@ -0,0 +1,24 @@ >> +// SPDX-License-Identifier: GPL-2.0 OR MIT >> +/* >> + * Copyright (C) 2024 Yangyu Chen <cyy@xxxxxxxxxxxx> >> + */ >> + >> +#include "k230.dtsi" >> + >> +/ { >> + model = "Canaan CanMV-K230"; >> + compatible = "canaan,canmv-k230", "canaan,kendryte-k230"; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ddr: memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x0 0x0 0x20000000>; >> + }; >> +}; >> + >> +&uart0 { >> + status = "okay"; >> +}; >> diff --git a/arch/riscv/boot/dts/canaan/k230-evb.dts >> b/arch/riscv/boot/dts/canaan/k230-evb.dts >> new file mode 100644 >> index 000000000000..f898b8e62368 >> --- /dev/null >> +++ b/arch/riscv/boot/dts/canaan/k230-evb.dts >> @@ -0,0 +1,24 @@ >> +// SPDX-License-Identifier: GPL-2.0 OR MIT >> +/* >> + * Copyright (C) 2024 Yangyu Chen <cyy@xxxxxxxxxxxx> >> + */ >> + >> +#include "k230.dtsi" >> + >> +/ { >> + model = "Kendryte K230 EVB"; >> + compatible = "canaan,k230-usip-lp3-evb", "canaan,kendryte- >> k230"; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ddr: memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x0 0x0 0x20000000>; >> + }; >> +}; >> + >> +&uart0 { >> + status = "okay"; >> +}; >> diff --git a/arch/riscv/boot/dts/canaan/k230.dtsi >> b/arch/riscv/boot/dts/canaan/k230.dtsi >> new file mode 100644 >> index 000000000000..7da49498945e >> --- /dev/null >> +++ b/arch/riscv/boot/dts/canaan/k230.dtsi >> @@ -0,0 +1,140 @@ >> +// SPDX-License-Identifier: GPL-2.0 OR MIT >> +/* >> + * Copyright (C) 2024 Yangyu Chen <cyy@xxxxxxxxxxxx> >> + */ >> + >> +#include <dt-bindings/interrupt-controller/irq.h> >> + >> +/dts-v1/; >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + compatible = "canaan,kendryte-k230"; >> + >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + timebase-frequency = <27000000>; >> + >> + cpu@0 { >> + compatible = "thead,c908", "riscv"; >> + device_type = "cpu"; >> + reg = <0>; >> + riscv,isa = >> "rv64imafdcv_zba_zbb_zbc_zbs_zicbom_svpbmt"; >> + riscv,isa-base = "rv64i"; >> + riscv,isa-extensions = "i", "m", "a", "f", >> "d", "c", "v", "zba", "zbb", >> + "zbc", "zbs", >> "zicbom", "zicntr", "zicsr", >> + "zifencei", "zihpm", >> "svpbmt"; >> + riscv,cbom-block-size = <64>; >> + d-cache-block-size = <64>; >> + d-cache-sets = <128>; >> + d-cache-size = <32768>; >> + i-cache-block-size = <64>; >> + i-cache-sets = <128>; >> + i-cache-size = <32768>; >> + next-level-cache = <&l2_cache>; >> + mmu-type = "riscv,sv39"; >> + >> + cpu0_intc: interrupt-controller { >> + compatible = "riscv,cpu-intc"; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + }; >> + }; >> + >> + l2_cache: l2-cache { >> + compatible = "cache"; >> + cache-block-size = <64>; >> + cache-level = <2>; >> + cache-size = <262144>; >> + cache-sets = <256>; >> + cache-unified; >> + }; >> + }; >> + >> + apb_clk: apb-clk-clock { >> + compatible = "fixed-clock"; >> + clock-frequency = <50000000>; >> + clock-output-names = "apb_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + soc { >> + compatible = "simple-bus"; >> + interrupt-parent = <&plic>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + dma-noncoherent; >> + ranges; >> + >> + plic: interrupt-controller@f00000000 { >> + compatible = "canaan,k230-plic" ,"thead,c900- >> plic"; >> + reg = <0xf 0x00000000 0x0 0x04000000>; >> + interrupts-extended = <&cpu0_intc 11>, >> <&cpu0_intc 9>; >> + interrupt-controller; >> + #address-cells = <0>; >> + #interrupt-cells = <2>; >> + riscv,ndev = <208>; >> + }; >> + >> + clint: timer@f04000000 { >> + compatible = "canaan,k230-clint", >> "thead,c900-clint"; >> + reg = <0xf 0x04000000 0x0 0x00010000>; >> + interrupts-extended = <&cpu0_intc 3>, >> <&cpu0_intc 7>; >> + }; >> + >> + uart0: serial@91400000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x91400000 0x0 0x1000>; >> + clocks = <&apb_clk>; >> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + >> + uart1: serial@91401000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x91401000 0x0 0x1000>; >> + clocks = <&apb_clk>; >> + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + >> + uart2: serial@91402000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x91402000 0x0 0x1000>; >> + clocks = <&apb_clk>; >> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + >> + uart3: serial@91403000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x91403000 0x0 0x1000>; >> + clocks = <&apb_clk>; >> + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + >> + uart4: serial@91404000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x91404000 0x0 0x1000>; >> + clocks = <&apb_clk>; >> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + }; >> +}; >
Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- Date: Mon, 25 Mar 2024 11:10:49 +0800
- In-reply-to: <c052918c13069cfcf768d03518560c65c990b220.camel@icenowy.me>
- References: <tencent_F76EB8D731C521C18D5D7C4F8229DAA58E08@qq.com> <tencent_DF5D7CD182AFDA188E0FB80E314A21038D08@qq.com> <c052918c13069cfcf768d03518560c65c990b220.camel@icenowy.me>
- Follow-Ups:
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Conor Dooley
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- References:
- [PATCH v6 00/11] riscv: add initial support for Canaan Kendryte K230
- From: Yangyu Chen
- [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Icenowy Zheng
- [PATCH v6 00/11] riscv: add initial support for Canaan Kendryte K230
- Prev by Date: Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- Next by Date: Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- Previous by thread: Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- Next by thread: Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- Index(es):
 |